FedoraForum.org - Fedora Support Forums and Community
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2008
    Posts
    176
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    HOWTO: Fedora 10 install in graphical mode with an ATI 4850 or 4870 graphics card

    I have an ATI 4850 graphics card and had to do the install in text mode, which isn't that bad, but today I found out how to get the graphical install to work.

    For this, I booted off of the Fedora 10 DVD.
    At the very beginning option where it asks to do the Install or memory test or other options, hit the ESC key to get you to the "boot:" prompt.
    At the boot prompt, type "linux xdriver=vesa" and press Enter.
    After a few seconds, you should get into the graphical install using the VESA driver.
    Example:
    boot: linux xdriver=vesa

    Now when the install finishes and reboots, I believe your system will still try to use the open source Radeon driver that doesn't seem to work with the ATI 4850 nor ATI 4870 graphics cards.
    CTRL+ALT+F2 should get you to the command prompt to login.

    Now is a good time to install all the Fedora updates before playing with the video drivers. Do this by running this as the root user:
    yum update

    Then, you can install the ATI proprietary driver using Leigh123's Howto for fglrx (Ati driver) and Compiz-fusion.

    After the ATI proprietary driver is installed, you can install compiz-fusion for cool wavy window and graphical cube effects using Leigh123's Howto for F10, F9 & F8 compiz-fusion ( for the official fedora packages )

    Enjoy!

    Jeff

    PS. Other options for drivers include:

    Force the VESA driver by running:
    Xorg -configure
    cp /root/xorg.conf.new /etc/X11/xorg.conf
    sed -i 's/radeon/vesa/g' /etc/X11/xorg.conf
    # reboot by running:
    init 6

    or

    You can try forcing the system to boot with the kernel option of xdriver=vesa. I haven't tried this, but if you are familiar with the /boot/grub/grub.conf file, you can put "xdriver=vesa" at the end of the kernel line and see if that works. If it does, you shouldn't need an /etc/X11/xorg.conf file.
    Last edited by Jeff72; 11th February 2009 at 06:37 AM.

  2. #2
    Join Date
    Nov 2008
    Posts
    70
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    AAA+++ for this method - worked like a charm on my HD 4870 1GB card, which previously only got a blank white screen.

    Also, if you use this method to install - you may get the menu which has mention to 'Press [TAB] to edit options', in which case just add 'xdriver=vesa' to the end of the line, and press enter to load the installer.

    This option also appears to save after install, as my Radeon is now by default running on VESA driver after reboot

  3. #3
    Join Date
    Mar 2007
    Posts
    3
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    This thread looks most like my problem, but the fix doesn't yet work. My old graphics card died, and I got an ATI Sapphire HD 3850. In the normal install, after CUPS, the screen goes blank with my (DVI) monitor saying no signal. Eventually, I hear sound which implies that the install goes on even though there is no video. I've tried adding xdriver=vesa to the boot command screen, but no luck. I'm trying to boot from a CD to install on a fresh SATA drive. Any suggestions? Get another graphics card?

  4. #4
    Join Date
    Nov 2008
    Posts
    176
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cjpDodge
    This thread looks most like my problem, but the fix doesn't yet work. My old graphics card died, and I got an ATI Sapphire HD 3850. In the normal install, after CUPS, the screen goes blank with my (DVI) monitor saying no signal. Eventually, I hear sound which implies that the install goes on even though there is no video. I've tried adding xdriver=vesa to the boot command screen, but no luck. I'm trying to boot from a CD to install on a fresh SATA drive. Any suggestions? Get another graphics card?
    There should be an additional option during the install to add boot line command options. This would be in addition to the initial boot option, like the other guy mentioned. Sounds like you might have to do this in order for the full install to work.

    The only other thing I can think of is, does your video card have dual outputs? Have you tried the other output on the card after the screen goes blank?

    Hope that helps.

  5. #5
    Join Date
    May 2009
    Location
    São Caetano do Sul - SP - Brazil
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have the ATI Sapphire HD 4850 X2 and only got a blank white screen.
    I try ati open driver and radeonhd driver but no sucess work.
    My video card works only VESA driver! :S

  6. #6
    Join Date
    Jun 2009
    Location
    USA
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    a little help

    i am using the exact same vid card on F10... Sapphire Radeon HD 3850 w/ 512 MB GDDR3. booting from the F10 DVD it takes you to the starting screen, press tab and add the line

    linux xdriver=vesa.

    fedora 10 should install and work like normal. i'm still having trouble getting the actual ATI proprietary driver to cooperate. incedentally, i noticed that the catalyst control center was added to the RPM repository in yumex. everytime i try to install those with my ATI driver it works the very first time and then after reboot i can't seem to get it working again after that.

    lol maybe leigh123 can work some magic with the newer catalyst downloads.

Similar Threads

  1. Cannot install in Graphical Mode, Forced into Text mode, an stuck with text mode!!
    By yogeshnachnani in forum Installation, Upgrades and Live Media
    Replies: 14
    Last Post: 11th February 2009, 07:57 AM
  2. Fedora 10 default install fails with ATI 4850 graphics card (but text install works)
    By Jeff72 in forum Installation, Upgrades and Live Media
    Replies: 1
    Last Post: 20th January 2009, 06:27 PM
  3. Unable to install Fedora 9 - sets nvidia Graphics mode to 81.3KHz/65Hz [SOLVED]
    By fballem in forum Installation, Upgrades and Live Media
    Replies: 5
    Last Post: 15th October 2008, 12:14 AM
  4. Can't install fedora graphics mode
    By sivavenkatay in forum Installation, Upgrades and Live Media
    Replies: 8
    Last Post: 20th August 2008, 11:09 AM
  5. Impossible to install in graphical mode
    By galatei in forum Installation, Upgrades and Live Media
    Replies: 5
    Last Post: 16th November 2006, 10:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •