I have the kernel that you indicated now installed on my laptop, and nvidia driver (1.6f) is installed and working nicely.
I have the kernel that you indicated now installed on my laptop, and nvidia driver (1.6f) is installed and working nicely.
when i tried to update now, i am getting a dependency problem . message is here
Error: Missing Dependency: xorg-x11-drv-nvidia = 190.53-1.fc12 is needed by package xorg-x11-drv-nvidia-libs-190.53-1.fc12.i686 (installed)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
a free world is possible
Nvidia is now giving me a gigantic headache.
A few days ago, a new kernell update came in. The f****ed up the nvidia driver. So I waited a couple of days (running Windoze 7 instead), and now I try to update. There's indeed an NVidia update ready. BUT:
yum -y update gives me, next to a long list of packages to be updated:Trying all these suggestions doesn't help much. When I try yum -y install xorg-x11-drv-nvidia I get:Code:--> Missing Dependency: xorg-x11-drv-nvidia = 190.53-1.fc12 is needed by package xorg-x11-drv-nvidia-libs-190.53-1.fc12.i686 (rpmfusion-nonfree-updates) Error: Missing Dependency: xorg-x11-drv-nvidia = 190.53-1.fc12 is needed by package xorg-x11-drv-nvidia-libs-190.53-1.fc12.i686 (rpmfusion-nonfree-updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestPlease help!?Code:Setting up Install Process Package 1:xorg-x11-drv-nvidia-190.53-2.fc12.x86_64 already installed and latest version Nothing to do
Edit: I now see that this is the same error as pravlin. Please help us?![]()
Greetz (and thanks for all the help!)
BenTrein
The internet isn't a highway, it's a swamp. The more you surf the more it draws you in!
Great authors suffer from Writer's Block. I cherrish my Writer's Blog!
I uninstalled xorg-x11-drv-nvidia-libs.i686 (using x86_84 here, too). after that, the update worked fine (although it is not really an update, the driver version is decreasing, nut that's because there was a bug in the fan controlling, that caused some cards to die on certain games if I remember that correctly). The problem now is just, that 32-bit games (and other 3d-stuff) is not working anymore now (because the xorg-x11-drv-nvidia-libs.i686 are missing, of course). There is no package with the version 190.53-2, only 190.53-1 and I have no idea why. and there is still no update for the kmod-nvidia package.
So this sort of solves the problem, but you still have to wait for the 32bit-libs.
update: akmod-nvidia is working fine again, so using akmod-nvidia instead of kmod-nvidia should solve that...but still: no 32bit 3D applications will work
Last edited by kto; 14th March 2010 at 12:30 PM.
Desktop: Intel Core 2 Duo 2.13 GHz, 2 GB RAM, 2.5 TB HDD, GeForce 8600 GTS : Fedora 15 x86_64
Notebook: Dell xps with Intel Core 2 Duo 2.13 GHz, 4 GB RAM, 320 GB HDD , GeForce 8400m GS : Fedora 13 x86_64
Server: Intel Celeron 900 MHz, 128 MB RAM, 20 GB HDD: Debian stable
@ pravlin
@ BenTrein
@ kto
Rpmfusion have pushed new xorg-x11-drv-nvidia & xorg-x11-drv-nvidia-libs packages (195.30-4) today to fix the issue, you might have to wait for the repos to rsync first.
http://download1.rpmfusion.org/nonfr...iew/index.html
http://download1.rpmfusion.org/nonfr...iew/index.html
thanks for the info leigh =)
Desktop: Intel Core 2 Duo 2.13 GHz, 2 GB RAM, 2.5 TB HDD, GeForce 8600 GTS : Fedora 15 x86_64
Notebook: Dell xps with Intel Core 2 Duo 2.13 GHz, 4 GB RAM, 320 GB HDD , GeForce 8400m GS : Fedora 13 x86_64
Server: Intel Celeron 900 MHz, 128 MB RAM, 20 GB HDD: Debian stable
Thank you for the info Leigh![]()
=========================================
The new nvidia drivers seem to have killed compiz for me. At least that seems to be the only recent update that could have had an effect. I'm back on metacity....
Thank you as well but the nvidia driver is not working for me, I get a black screen as is reported in several locations :
http://forums.fedoraforum.org/showthread.php?t=242323
http://permalink.gmane.org/gmane.lin...general/364778
For anyone else with this problem,
I restored X by removing the nvidia driver and using nouveau:
Or if you are using akmod-nvidiaCode:yum remove kmod-nvidia xorg-x11-drv-nvidia
[code]Then , depending on how you set up the nvidia driver, seeCode:yum remove akmod-nvidia xorg-x11-drv-nvidia
http://rpmfusion.org/Howto/nVidia#fedora_version_notes
either restore (or rebuild) your old initrd or
remove the line rdblacklist=nouveau or
edit the line nouveau.modeset=1
in /boot/grub/grub.conf
Then reboot
My xorg.conf looks like :
There are also reports of the nvidia driver working if downloaded and installed from the nvidia site, but I have not tried this (I got kind of tired of fighting with the nvidia driver and the nouveau works good enough for my needs).Code:Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105+inet" Option "XkbLayout" "us" EndSection Section "Device" Identifier "Videocard0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
If it is not broken, tweak it... If you break Fedora you get to keep both pieces :p
@ ekimd
@ bodhi.zazen
Thanks both for your postings --- I'm experiencing the exact same problem, with /var/log/Xorg.0.log ending at "WAIT", a blank screen, and no response to keyboard; my monitors appear to go into powersave mode.
I'm on a MacPro with an nVidia GTX285.
I hope there is a fix for this soon, else I might try compiling the driver from the .run file on the nVidia site. @ bodhi.zazen: you said there were reports of this driver working -- do you have any links? I would like to read up on the thread if there is one. Thanks also for your steps to "reverse" the process.
If it is not broken, tweak it... If you break Fedora you get to keep both pieces :p
Nouveau works reasonably well in F13 for me ( I'm using nvidia 195.36.15 in F12 & F14 without issue )
Code:[leigh@localhost ~]$ glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.4 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_INTEL_swap_event client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event GLX version: 1.4 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event OpenGL vendor string: nouveau OpenGL renderer string: Gallium 0.4 on NV4B OpenGL version string: 2.0 Mesa 7.8-devel OpenGL shading language version string: 1.20 OpenGL extensions:Code:[leigh@localhost ~]$ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory [leigh@localhost ~]$
I guess I should mention that after a recent reboot, my installation works again -- I have proper GLX and compiz. Maybe there was an update somewhere that should have been flagged with reboot required that wasn't flagged...