FedoraForum.org - Fedora Support Forums and Community
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2004
    Posts
    44
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    blank screen after latest updates (nvidia card)

    Hi all ;

    I've posted this to the mailing list with no response;

    I ran the latest updates this week (including the new kernel and the new
    kmod-nvidia update) and I got a blank screen when I rebooted.
    (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank)
    I assume this is when the xorg server is trying to start..

    I went into single user mode , backed up and then removed the xorg.conf file
    but still got a blank screen upon reboot.

    I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a
    safe location, and then restored the system back to its original state.

    I've since rsync'd my system back to where it was before the update. Anyone
    else seeing this issue? Any thoughts on how to fix it?

    Here's my Xorg.0.log file:





    X.Org X Server 1.7.5.901 (1.7.6 RC 1)
    Release Date: 2010-03-05
    X Protocol Version 11, Revision 0
    Build Operating System: x86-05 2.6.18-164.6.1.el5
    Current Operating System: Linux Issac.consistentstate.com 2.6.32.9-70.fc12.x86_64 #1 SMP Wed Mar 3 04:40:41 UTC 2010 x86_64
    Kernel command line: ro root=UUID=91673aa6-9636-4490-af4e-3c79a684a2d9 nomodeset LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
    Build Date: 08 March 2010 09:35:27PM
    Build ID: xorg-x11-server 1.7.5.901-4.fc12
    Current version of pixman: 0.16.6
    Before reporting problems, check http://bodhi.fedoraproject.org/
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 14 17:45:46 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Synaptics"
    (**) Option "Xinerama" "0"
    (**) Option "AIGLX" "on"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
    (**) ModulePath set to "/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x7c9800
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7

    (--) PCI:*(0:1:0:0) 10de:061e:1028:019c nVidia Corporation rev 162, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension SELinux
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib64/xorg/modules/extensions/nvidia/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 190.53 Wed Dec 9 16:27:33 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) NVIDIA dlloader X Driver 190.53 Wed Dec 9 15:39:50 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib64/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib64/xorg/modules/libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.5.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "TwinView" "1"
    (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
    (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
    (**) Mar 14 17:45:47 NVIDIA(0): Enabling RENDER acceleration
    (II) Mar 14 17:45:47 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) Mar 14 17:45:47 NVIDIA(0): enabled.
    (II) Mar 14 17:45:53 NVIDIA(0): NVIDIA GPU Quadro FX 3700M (G92GL) at PCI:1:0:0 (GPU-0)
    (--) Mar 14 17:45:53 NVIDIA(0): Memory: 1048576 kBytes
    (--) Mar 14 17:45:53 NVIDIA(0): VideoBIOS: 62.92.5a.00.04
    (II) Mar 14 17:45:53 NVIDIA(0): Detected PCI Express Link width: 16X
    (--) Mar 14 17:45:53 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Mar 14 17:45:53 NVIDIA(0): Connected display device(s) on Quadro FX 3700M at PCI:1:0:0:
    (--) Mar 14 17:45:53 NVIDIA(0): Seiko (DFP-0)
    (--) Mar 14 17:45:53 NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
    (--) Mar 14 17:45:53 NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
    (**) Mar 14 17:45:56 NVIDIA(0): TwinView enabled
    (II) Mar 14 17:45:56 NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
    (WW) Mar 14 17:45:56 NVIDIA(0): TwinView requested, but only 1 display devices found.
    (II) Mar 14 17:45:56 NVIDIA(0): Assigned Display Device: DFP-0
    (WW) Mar 14 17:45:56 NVIDIA(0): Invalid display device in Mode Description
    (WW) Mar 14 17:45:56 NVIDIA(0): "CRT:nvidia-auto-select+1920+0"
    (WW) Mar 14 17:45:56 NVIDIA(0): Not using mode description "CRT:nvidia-auto-select+1920+0";
    (WW) Mar 14 17:45:56 NVIDIA(0): unable to map to display device
    (II) Mar 14 17:45:56 NVIDIA(0): Validated modes:
    (II) Mar 14 17:45:56 NVIDIA(0):
    (II) Mar 14 17:45:56 NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
    (II) Mar 14 17:45:56 NVIDIA(0): Virtual screen size determined to be 1920 x 1200
    (--) Mar 14 17:45:57 NVIDIA(0): DPI set to (131, 132); computed from "UseEdidDpi" X config
    (--) Mar 14 17:45:57 NVIDIA(0): option
    (WW) Mar 14 17:45:57 NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
    (WW) Mar 14 17:45:57 NVIDIA(0): UBB.
    (**) Mar 14 17:45:57 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) Mar 14 17:45:57 NVIDIA(0): Initialized GPU GART.
    (II) Mar 14 17:45:57 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Mar 14 17:45:57 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) Mar 14 17:46:00 NVIDIA(0): Setting mode
    (II) Mar 14 17:46:00 NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
    (EE) Mar 14 17:46:02 NVIDIA(0): WAIT: (E, 0, 0x827d, 0)

  2. #2
    Join Date
    Jan 2006
    Posts
    2,808
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: blank screen after latest updates (nvidia card)

    You are not the only one having this error. There seems to be a fix in the works, see here, reading posts #989 and above.

    http://fedoraforum.org/forum/showthr...204752&page=66

  3. #3
    Join Date
    May 2004
    Posts
    44
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: blank screen after latest updates (nvidia card)

    I've tried multiple upgrades since the failure, I tried installing the akmod package and enabling the livna repo. Still I get a blank screen after reboot. Anyone know if a fix is still in the works? did a fix come out and I missed it?

    Thanks in advance

  4. #4
    Join Date
    Jan 2010
    Posts
    892
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: blank screen after latest updates (nvidia card)

    Checking to the kernel and nvidia drivers.
    rpm -qa | grep -e kernel -e nvidia | sort
    You should check to see if your kmod matches your nvidia drivers and kernel.

    You can also edit the boot config file to choose which kernel to boot with and try an older one that should give you a nice graphical enviroment till you sort out the driver problems.

    In /etc/boot/grub/grub.config change the following.
    default=0
    timeout=30
    splashimage=(hd0,0)/grub/splash.xpm.gz
    #hiddenmenu
    The big red characters are what you need to change timout is zero and hiddenmenu is active so you just need to comment that out and change the value of timout to 30.

    This will present you with a menu to choose which kernel to boot from at boot time.
    Last edited by BugRocks1; 23rd March 2010 at 03:07 PM.

Similar Threads

  1. No Screen after latest updates with fedora 10 i686
    By terry_g in forum Using Fedora
    Replies: 0
    Last Post: 19th June 2009, 04:58 PM
  2. Fedora 11 preview with updates, blank screen problem
    By helloworld1 in forum Alpha, Beta & Snapshots Discussions (Fedora 11 Only)
    Replies: 3
    Last Post: 10th May 2009, 09:11 PM
  3. FC8 nvidia blank screen
    By jack.sparrow in forum Hardware
    Replies: 3
    Last Post: 17th January 2008, 02:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •