Fedora Linux Support Community & Resources Center
  #1  
Old 11th September 2017, 03:58 PM
fedix Offline
Registered User
 
Join Date: Oct 2006
Location: Mpumalanga, South Africa
Posts: 71
linuxfedorachrome
USB Issues

Since installing Fedora 26, I have a bunch of USB issues. I have enabled EHCI in BIOS, which I found on other forums could be an issue, but it didn't resolve anything.

No other USB, except for my keyboard and mouse, is working. dmesg shows the following
Code:
[  262.949063] usb 1-1.2: device descriptor read/64, error -32
[  263.122077] usb 1-1.2: device descriptor read/64, error -32
[  263.289078] usb 1-1.2: new full-speed USB device number 8 using ehci-pci
[  263.354070] usb 1-1.2: device descriptor read/64, error -32
[  263.522061] usb 1-1.2: device descriptor read/64, error -32
[  263.689069] usb 1-1.2: new full-speed USB device number 9 using ehci-pci
[  264.105047] usb 1-1.2: device not accepting address 9, error -32
[  264.169055] usb 1-1.2: new full-speed USB device number 10 using ehci-pci
[  264.585061] usb 1-1.2: device not accepting address 10, error -32
[  264.585155] usb 1-1-port2: unable to enumerate USB device
and then again...
Code:
[  338.340701] usb 2-1.6: device descriptor read/64, error -32
[  338.511674] usb 2-1.6: device descriptor read/64, error -32
[  338.678687] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
[  339.043673] usb 2-1.6: new full-speed USB device number 7 using ehci-pci
[  339.108669] usb 2-1.6: device descriptor read/64, error -32
[  339.279660] usb 2-1.6: device descriptor read/64, error -32
[  339.446657] usb 2-1.6: new full-speed USB device number 8 using ehci-pci
[  339.511653] usb 2-1.6: device descriptor read/64, error -32
[  339.679648] usb 2-1.6: device descriptor read/64, error -32
[  339.846642] usb 2-1.6: new full-speed USB device number 9 using ehci-pci
[  340.262647] usb 2-1.6: device not accepting address 9, error -32
[  340.326615] usb 2-1.6: new full-speed USB device number 10 using ehci-pci
[  340.742608] usb 2-1.6: device not accepting address 10, error -32
[  340.742731] usb 2-1-port6: unable to enumerate USB device
Any help please!
Reply With Quote
  #2  
Old 11th September 2017, 05:01 PM
antikythera Offline
Administrator
 
Join Date: Dec 2013
Location: United Kingdom
Posts: 5,070
linuxchrome
Re: USB Issues

what usb controller is this? are you using a hub? please post the output of the following commands

Code:
lspci
lsusb
__________________
Download, Install and Share Fedora - Official ISO Torrents | Live ISO Respins containing post-release updates
Reply With Quote
  #3  
Old 11th September 2017, 07:01 PM
fedix Offline
Registered User
 
Join Date: Oct 2006
Location: Mpumalanga, South Africa
Posts: 71
linuxfedorachrome
Re: USB Issues

Hi, yes there is a card reader connected on the motherboard. But none of the other USB slots are also working.

lspci output:
Code:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1)
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
... and lsusb output:
Code:
us 002 Device 004: ID 0461:4d51 Primax Electronics, Ltd 0Y357C PMX-MMOCZUL (B) [Dell Laser Mouse]
Bus 002 Device 003: ID 04f2:0116 Chicony Electronics Co., Ltd KU-2971/KU-0325 Keyboard
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Thanks
Reply With Quote
  #4  
Old 11th September 2017, 08:16 PM
antikythera Offline
Administrator
 
Join Date: Dec 2013
Location: United Kingdom
Posts: 5,070
linuxchrome
Re: USB Issues

which ports aren't working? are they on the backplate of the mainboard or extra chassis ports connected via header cables? the usb chipset itself is fully supported by linux so there shouldn't be a kernel module fault there.

check any installed usb header cables are attached correctly to the riser pins. that includes for the card reader. if in doubt consult the mainboard's user manual. it will have a pin diagram for the usb headers.
__________________
Download, Install and Share Fedora - Official ISO Torrents | Live ISO Respins containing post-release updates
Reply With Quote
  #5  
Old 11th September 2017, 11:39 PM
computersavvy Offline
Registered User
 
Join Date: Oct 2014
Location: Texas, USA
Posts: 39
linuxfedorachrome
Re: USB Issues

Also try disconnecting ALL usb devices that are plugged into the motherboard connectors and use only the ports that are built in and see if the problem remains.
That will tell you if this is a motherboard/fedora issue or if it is related to an attached device that may be causing problems
Reply With Quote
  #6  
Old 13th September 2017, 07:50 AM
fedix Offline
Registered User
 
Join Date: Oct 2006
Location: Mpumalanga, South Africa
Posts: 71
linuxfedorachrome
Re: USB Issues

Thanks! I've sorted 50% of the issues.

When onluy keyboard and mouse connected - no error in dmesg - this is now solved as the previous time, already there were dmesg errors. I changed a pin on the motherboard, marked with usbpwr1~4.

Now, the USB card reader is fine and recognising a USB. But when I try to use the other 2 onboard USB ports, or the front panel USB ports, I still get this message...
Code:
usb 1-1.3: new full-speed USB device number 7 using ehci-pci
usb 1-1.3: device descriptor read/64, error -32
usb 1-1.3: device descriptor read/64, error -32
usb 1-1.3: new full-speed USB device number 8 using ehci-pci
usb 1-1.3: device descriptor read/64, error -32
usb 1-1.3: device descriptor read/64, error -32
usb 1-1.3: new full-speed USB device number 9 using ehci-pci
usb 1-1.3: device not accepting address 9, error -32
usb 1-1.3: new full-speed USB device number 10 using ehci-pci
usb 1-1.3: device not accepting address 10, error -32
usb 1-1-port3: unable to enumerate USB device
Reply With Quote
  #7  
Old 13th September 2017, 09:29 AM
antikythera Offline
Administrator
 
Join Date: Dec 2013
Location: United Kingdom
Posts: 5,070
linuxchrome
Re: USB Issues

Quote:
I changed a pin on the motherboard, marked with usbpwr1~4.
that's a device power jumper setting not a pin. like I said, please check all cable connections to usb headers internally. you need to make sure you haven't shorted something by plugging in a USB cable the wrong way round or offset by a row of pins.
__________________
Download, Install and Share Fedora - Official ISO Torrents | Live ISO Respins containing post-release updates
Reply With Quote
Reply

Tags
issues, usb

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Dell D630] Hardware issues after upgrading to F22 (graphics + sleep issues) Vinz1165 Hardware & Laptops 5 20th August 2015 06:56 AM
updater issues and yum issues chris53 Using Fedora 12 23rd June 2010 11:36 AM
issues with yum gui willedoit Fedora 13 Development Branch 0 18th April 2010 05:03 AM
fedora 9 issues - nVIDIA issues. Help please! pinoyboy Using Fedora 8 12th June 2008 11:04 AM
Yum issues anton_pm Using Fedora 2 30th May 2007 02:29 AM


Current GMT-time: 11:14 (Wednesday, 20-09-2017)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat