[SOLVED] FC29 + Ryzen + AsusTek PRIME X370-PRO: USB woes again
FedoraForum.org - Fedora Support Forums and Community
Results 1 to 6 of 6

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2012
    Location
    santa barbara, CA
    Posts
    1,197
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    FC29 + Ryzen + AsusTek PRIME X370-PRO: USB woes again

    Hey guys,

    I have been having these very annoying USB problems, which show up suddenly, and then a dnf-upgrade later disappear, only to reappear after yet another update.
    The problem manifests itself usually when connecting external USB hard drives, and copying a truckload of data to either an internal HD, or sending it through the network to some other machine.

    example /var/log/messages this morning:
    Code:
    [ 7242.618002] usb 2-3: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
    [ 7242.634732] usb 2-3: New USB device found, idVendor=0411, idProduct=02c2, bcdDevice= 1.25
    [ 7242.634735] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 7242.634736] usb 2-3: Product: HD-PCFSU3-A
    [ 7242.634737] usb 2-3: Manufacturer: BUFFALO
    [ 7242.634738] usb 2-3: SerialNumber: 0040496490405438
    [ 7242.640009] usb-storage 2-3:1.0: USB Mass Storage device detected
    [ 7242.640120] scsi host10: usb-storage 2-3:1.0
    [ 7243.682229] scsi 10:0:0:0: Direct-Access     BUFFALO  Portable HDD     0000 PQ: 0 ANSI: 3
    [ 7243.682632] sd 10:0:0:0: Attached scsi generic sg5 type 0
    [ 7243.683280] sd 10:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
    [ 7243.683708] sd 10:0:0:0: [sdg] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
    [ 7243.683712] sd 10:0:0:0: [sdg] 4096-byte physical blocks
    [ 7243.684760] sd 10:0:0:0: [sdg] Write Protect is off
    [ 7243.684764] sd 10:0:0:0: [sdg] Mode Sense: 73 00 10 08
    [ 7243.685788] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
    [ 7243.686601] sd 10:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
    [ 7243.831987]  sdg: sdg1
    [ 7243.833387] sd 10:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
    [ 7243.835769] sd 10:0:0:0: [sdg] Attached SCSI disk
    [ 7270.945650] Buffer I/O error on dev dm-11, logical block 851705861, lost async page write
    [ 7300.130039] Aborting journal on device dm-11-8.
    [ 7300.130133] Buffer I/O error on dev dm-11, logical block 1545, lost sync page write
    [ 7300.130143] JBD2: Error -5 detected when updating journal superblock for dm-11-8.
    [ 7332.395977] Buffer I/O error on dev dm-11, logical block 0, lost sync page write
    [ 7332.395996] EXT4-fs (dm-11): I/O error while writing superblock
    [ 7332.396001] EXT4-fs error (device dm-11): ext4_journal_check_start:61: Detected aborted journal
    [ 7332.396004] EXT4-fs (dm-11): Remounting filesystem read-only
    [ 7332.396087] Buffer I/O error on dev dm-11, logical block 0, lost sync page write
    [ 7332.396094] EXT4-fs (dm-11): I/O error while writing superblock
    [ 7344.166254] usb 2-3: USB disconnect, device number 4

    At the moment my inxi says:
    Code:
    System:    Host: nova Kernel: 5.2.11-100.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.3.1 Desktop: Xfce 4.13.3 
               Distro: Fedora release 29 (Twenty Nine) 
    Machine:   Type: Desktop Mobo: ASUSTeK model: PRIME X370-PRO v: Rev X.0x serial: <filter> UEFI: American Megatrends v: 4801 
               date: 04/25/2019 
    Memory:    RAM: total: 31.40 GiB used: 2.60 GiB (8.3%) 
               Array-1: capacity: 256 GiB note: check slots: 4 EC: None max module size: 64 GiB note: est. 
               Device-1: DIMM_A1 size: 8 GiB speed: 2133 MT/s type: DDR4 
               Device-2: DIMM_A2 size: 8 GiB speed: 2133 MT/s type: DDR4 
               Device-3: DIMM_B1 size: 8 GiB speed: 2133 MT/s type: DDR4 
               Device-4: DIMM_B2 size: 8 GiB speed: 2133 MT/s type: DDR4 
    CPU:       Topology: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ rev: 2 L2 cache: 3072 KiB 
               flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 81437 
               Speed: 1375 MHz min/max: 1550/3400 MHz Core speeds (MHz): 1: 1511 2: 1467 3: 1529 4: 1517 5: 1375 6: 1356 7: 1539 
               8: 1546 9: 1496 10: 1389 11: 1371 12: 1481
    I have tried switching it from black, to blue, to green, even to an orange/red USB port to no avail, it's always the same issue. Even plugging the drive to an external powered USB hub.

    Now, plugging the USB hard drive to a blue port in my very oldish Asus Mini-PC, and copying the same data out of the drive from there gives no errors whatsoever.
    ....


    EDIT: lsusb on the affected machine:
    Code:
    Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 005 Device 006: ID 047d:1020 Kensington Expert Mouse Trackball
    Bus 005 Device 005: ID 05ac:024f Apple, Inc. 
    Bus 005 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver
    Bus 005 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 005 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    EDIT#2: /var/log/messages on my mini-PC which works fine:
    Code:
    [5497925.403116] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
    [5497925.417695] usb 2-1: New USB device found, idVendor=0411, idProduct=02c2, bcdDevice= 1.25
    [5497925.417710] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [5497925.417721] usb 2-1: Product: HD-PCFSU3-A
    [5497925.417728] usb 2-1: Manufacturer: BUFFALO
    [5497925.417735] usb 2-1: SerialNumber: 0040496490405438
    [5497925.428531] usb-storage 2-1:1.0: USB Mass Storage device detected
    [5497925.429292] scsi host2: usb-storage 2-1:1.0
    [5497926.473533] scsi 2:0:0:0: Direct-Access     BUFFALO  Portable HDD     0000 PQ: 0 ANSI: 3
    [5497926.476544] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [5497933.188167] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497933.190033] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
    [5497933.190050] sd 2:0:0:0: [sdb] 4096-byte physical blocks
    [5497933.191659] sd 2:0:0:0: [sdb] Write Protect is off
    [5497933.191671] sd 2:0:0:0: [sdb] Mode Sense: 73 00 10 08
    [5497933.192591] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
    [5497933.194822] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497933.312283]  sdb: sdb1
    [5497933.316183] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497933.321225] sd 2:0:0:0: [sdb] Attached SCSI disk
    [5497959.084686] usb 2-1: USB disconnect, device number 2
    [5497959.088826] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
    [5497959.089254] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [5497959.340655] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
    [5497959.355306] usb 2-1: New USB device found, idVendor=0411, idProduct=02c2, bcdDevice= 1.25
    [5497959.355366] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [5497959.355375] usb 2-1: Product: HD-PCFSU3-A
    [5497959.355382] usb 2-1: Manufacturer: BUFFALO
    [5497959.355388] usb 2-1: SerialNumber: 0040496490405438
    [5497959.358253] usb-storage 2-1:1.0: USB Mass Storage device detected
    [5497959.361531] scsi host2: usb-storage 2-1:1.0
    [5497960.395006] scsi 2:0:0:0: Direct-Access     BUFFALO  Portable HDD     0000 PQ: 0 ANSI: 3
    [5497960.397275] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [5497960.398095] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497960.398680] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
    [5497960.398694] sd 2:0:0:0: [sdb] 4096-byte physical blocks
    [5497960.399518] sd 2:0:0:0: [sdb] Write Protect is off
    [5497960.399534] sd 2:0:0:0: [sdb] Mode Sense: 73 00 10 08
    [5497960.404436] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
    [5497960.406035] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497960.424037]  sdb: sdb1
    [5497960.425698] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    [5497960.427557] sd 2:0:0:0: [sdb] Attached SCSI disk
    [5497968.533083] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem
    [5497969.249152] EXT4-fs (dm-3): recovery complete
    [5497969.251816] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
    Last edited by bobx001; 8th September 2019 at 01:57 PM.
    "monsters John ... monsters from the ID..."
    "ma vule teva maar gul nol naya"

Similar Threads

  1. [SOLVED]
    FC29 - HPLip woes
    By bobx001 in forum Using Fedora
    Replies: 1
    Last Post: 6th February 2019, 02:38 PM
  2. Ryzen first experiences SUSE user has Ryzen
    By lsatenstein in forum Linux Chat
    Replies: 2
    Last Post: 22nd April 2017, 08:50 PM
  3. installation freezes - ASUSTeK SiS900 PCI Fast Ethernet
    By line in forum Installation, Upgrades and Live Media
    Replies: 11
    Last Post: 6th January 2008, 03:36 AM
  4. ASUSTek M2N32-SLI Deluxe Motherboard
    By independentgeo in forum Hardware & Laptops
    Replies: 0
    Last Post: 8th April 2007, 06:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •