FedoraForum.org - Fedora Support Forums and Community
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2007
    Posts
    83

    FC28: Hardware Error and reboot

    I have a lot of errors like these
    Quote Originally Posted by journalctl -p 3 -r
    Code:
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 1 microcode 6000852
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: TSC 0 MISC c008000200000000 
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 2: d800000000050153
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 0 microcode 6000852
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: TSC 0 MISC c012000001000000 
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: ba00001000020c0f
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 0 microcode 6000852
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: TSC 0 ADDR 107c0 MISC c008000100000000 
    Jun 14 14:11:08 fc-pc kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 2: be0040f00010010a
    -- Reboot --
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528971209 SOCKET 0 APIC 0 microcode 6000852
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: TSC 0 ADDR 1bbadb658 MISC c012000001000000 
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: fe00000000070f0f
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528971209 SOCKET 0 APIC 0 microcode 6000852
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: TSC 0 ADDR 7 
    Jun 14 13:13:32 fc-pc kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 1: b600000000100153
    -- Reboot --
    Jun 14 11:58:11 fc-pc kernel: watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [code:7601]
    Jun 14 11:58:03 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 23s! [chrome:3637]
    Jun 14 11:57:43 fc-pc kernel: watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [code:7601]
    Jun 14 11:57:35 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 23s! [chrome:3637]
    Jun 14 11:57:15 fc-pc kernel: watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [code:7601]
    Jun 14 11:57:07 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 23s! [chrome:3637]
    Jun 14 11:56:47 fc-pc kernel: watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [code:7601]
    Jun 14 11:56:39 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 23s! [chrome:3637]
    Jun 14 11:56:11 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [chrome:3637]
    Jun 14 11:55:44 fc-pc kernel:          (t=60000 jiffies g=440898 c=440897 q=69015)
    Jun 14 11:55:44 fc-pc kernel:         7-....: (39995 ticks this GP) idle=812/1/4611686018427387906 softirq=306709/306709 fqs=9737 
    Jun 14 11:55:44 fc-pc kernel: INFO: rcu_sched self-detected stall on CPU
    Jun 14 11:55:27 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 21s! [chrome:3637]
    Jun 14 11:55:04 fc-pc kernel: rcu_sched kthread starved for 60002 jiffies! g440897 c440896 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
    Jun 14 11:55:04 fc-pc kernel:         (detected by 7, t=60002 jiffies, g=440897, c=440896, q=45274)
    Jun 14 11:55:04 fc-pc kernel:         1-...!: (1 GPs behind) idle=2b0/0/0 softirq=309315/309316 fqs=0 
    Jun 14 11:55:04 fc-pc kernel:         0-...!: (0 ticks this GP) idle=3e0/0/0 softirq=571180/571180 fqs=0 
    Jun 14 11:55:04 fc-pc kernel: INFO: rcu_sched detected stalls on CPUs/tasks:
    Jun 14 11:54:35 fc-pc kernel: watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [chrome:3637]
    -- Reboot --
    Jun 14 10:33:27 fc-pc kernel: [Hardware Error]: cache level: L2, tx: INSN, mem-tx: IRD
    Jun 14 10:33:27 fc-pc kernel: [Hardware Error]: MC2 Error: Fill parity error on insn fills.
    Jun 14 10:33:27 fc-pc kernel: [Hardware Error]: CPU:0 (15:2:0) MC2_STATUS[-|CE|MiscV|-|-|-|-]: 0x9800000000050152
    Jun 14 10:33:27 fc-pc kernel: [Hardware Error]: Corrected error, no action required.
    Quote Originally Posted by inxi -Fxmz
    Code:
    System:    Host: fc-pc Kernel: 4.16.14-300.fc28.x86_64 x86_64 bits: 64 gcc: 8.1.1 Console: tty 0
               Distro: Fedora release 28 (Twenty Eight)
    Machine:   Device: desktop Mobo: ASUSTeK model: M5A78L-M LE v: Rev X.0x serial: <filter>
               BIOS: American Megatrends v: 1601 date: 11/27/2013
    CPU:       8 core AMD FX-8300 Eight-Core (-MCP-) arch: Bulldozer rev.0 cache: 16384 KB
               flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 53037
               clock speeds: max: 3300 MHz 1: 1404 MHz 2: 1394 MHz 3: 1403 MHz 4: 1400 MHz 5: 2716 MHz 6: 3420 MHz
               7: 1398 MHz 8: 1404 MHz
    Memory:    Array-1 capacity: 8 GB devices: 2 EC: None
               Device-1: DIMM0 size: 8 GB speed: 667 MT/s type: Other part: N/A
               Device-2: DIMM1 size: No Module Installed type: N/A
    Graphics:  Card: NVIDIA GK208B [GeForce GT 710] bus-ID: 01:00.0
               Display Server: X.org 1.19.6 drivers: vesa,nouveau (unloaded: modesetting,fbdev)
               Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
               OpenGL: renderer: NV106 version: 4.3 Mesa 18.0.2 Direct Render: Yes
    Audio:     Card-1 NVIDIA GK208 HDMI/DP Audio Controller driver: snd_hda_intel bus-ID: 01:00.1
               Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
               driver: snd_hda_intel bus-ID: 00:14.2
               Sound: Advanced Linux Sound Architecture v: k4.16.14-300.fc28.x86_64
    Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
               driver: r8169 v: 2.3LK-NAPI port: e800 bus-ID: 02:00.0
               IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
    Drives:    HDD Total Size: 500.1GB (8.1% used)
               ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB temp: 38C
    Partition: ID-1: / size: 442G used: 23G (6%) fs: ext4 dev: /dev/sda3
               ID-2: /boot size: 488M used: 197M (44%) fs: ext4 dev: /dev/sda1
               ID-3: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
    RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
    Sensors:   System Temperatures: cpu: 40.0C mobo: 37.0C
               Fan Speeds (in rpm): cpu: 1956 sys-1: 3000
    Info:      Processes: 294 Uptime: 8 min Memory: 1541.0/7957.7MB Init: systemd runlevel: 5 Gcc sys: 8.1.1
               Client: Shell (sudo) inxi: 2.3.56
    Quote Originally Posted by dmesg | grep microcode
    Code:
    [    0.019000] mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 0 microcode 6000852
    [    0.019000] mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 0 microcode 6000852
    [    0.021156] mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1528974666 SOCKET 0 APIC 1 microcode 6000852
    [    1.309723] microcode: microcode updated early to new patch_level=0x06000852
    [    1.309741] microcode: CPU0: patch_level=0x06000852
    [    1.309746] microcode: CPU1: patch_level=0x06000852
    [    1.309752] microcode: CPU2: patch_level=0x06000852
    [    1.309756] microcode: CPU3: patch_level=0x06000852
    [    1.309764] microcode: CPU4: patch_level=0x06000852
    [    1.309768] microcode: CPU5: patch_level=0x06000852
    [    1.309774] microcode: CPU6: patch_level=0x06000852
    [    1.309781] microcode: CPU7: patch_level=0x06000852
    [    1.309804] microcode: Microcode Update Driver: v2.2.
    Quote Originally Posted by dnf list microcode*
    Code:
    Last metadata expiration check: 2:13:03 ago on Thu 14 Jun 2018 12:08:41 PM EEST.
    Installed Packages
    microcode_ctl.x86_64                                                                                     2:2.1-23.fc28                                                                                     @updates
    How to fix this issue?

  2. #2
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    6,062

    Re: FC28: Hardware Error and reboot

    try disabling C-states in the motherboard's firmware settings

  3. #3
    Join Date
    Feb 2007
    Posts
    83

    Re: FC28: Hardware Error and reboot

    Quote Originally Posted by antikythera
    try disabling C-states in the motherboard's firmware settings
    I've disabled C-state, but a new error is appeared
    Quote Originally Posted by journalctl -p 3 -r
    Code:
    -- Reboot --
    Jun 15 09:51:20 fc-pc kernel: nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT]
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000009
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: TRAP ch 5 [003fadd000 Xorg[2029]]
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000009
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: TRAP ch 5 [003fadd000 Xorg[2029]]
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000009
    ...
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000009
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: TRAP ch 5 [003fadd000 Xorg[2029]]
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000009
    Jun 15 09:51:15 fc-pc kernel: nouveau 0000:01:00.0: gr: TRAP ch 5 [003fadd000 Xorg[2029]]
    Freezes and reboots...

  4. #4
    Join Date
    Dec 2012
    Location
    santa barbara, CA
    Posts
    786
    Linux (Fedora) Firefox 60.0

    Re: FC28: Hardware Error and reboot

    I recommend disabling the nouveau graphics driver, and installing the rpmfusion kmod-nvidia
    (first enable their repository: https://rpmfusion.org/Configuration )
    and then follow this guide (I guess your card would be Legacy GeForce 6/7):
    https://rpmfusion.org/Howto/NVIDIA?h...tegoryHowto%29

    Once that is done and it works and you rebooted, then modify your /etc/default/grub file to contain:
    GRUB_CMDLINE_LINUX="rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1 rhgb quiet nmi_watchdog=0 nohpet pci=biosirq rcu_nocbs=0-7"
    then type: grub2-mkconfig -o /boot/grub2/grub.cfg (that last path maybe different is you boot with EFI)

    then reboot
    "monsters John ... monsters from the ID..."
    "ma vule teva maar gul nol naya"

Similar Threads

  1. reboot after resume on f28 with kernel 4.16.13-300.fc28.x86_64
    By robbnl in forum Installation, Upgrades and Live Media
    Replies: 9
    Last Post: 17th June 2018, 11:19 AM
  2. Replies: 2
    Last Post: 10th May 2018, 03:48 PM
  3. FC28 - Few questions
    By Skeleton in forum Using Fedora
    Replies: 5
    Last Post: 10th May 2018, 02:25 PM
  4. fc28 dnf update
    By oystercatcher in forum F28 Development Forum
    Replies: 1
    Last Post: 15th April 2018, 04:34 AM
  5. Replies: 0
    Last Post: 22nd June 2005, 08:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •