FC28: High cpu usage from systemd-udevd after upgrading to FC28
FedoraForum.org - Fedora Support Forums and Community
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2007
    Posts
    88

    FC28: High cpu usage from systemd-udevd after upgrading to FC28

    Quote Originally Posted by uname -a
    Linux pc-fc 4.16.6-302.fc28.x86_64 #1 SMP Wed May 2 00:07:06 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
    Quote Originally Posted by inxi -Fxmz
    Code:
    System:    Host: pc-fc Kernel: 4.16.6-302.fc28.x86_64 x86_64
               bits: 64 gcc: 8.0.1
               Console: tty 0 Distro: Fedora release 28 (Twenty Eight)
    Machine:   Device: portable System: Dell product: Studio 1555 v: A13 serial: <filter>
               Mobo: Dell model: 0C234M v: A13 serial: <filter>
               BIOS: Dell v: A13 date: 04/02/2011
    Battery    BAT0: charge: 3.4 Wh 93.2% condition: 3.6/5.2 Wh (70%)
               model: SIMPLO Dell status: Discharging
    CPU:       Dual core Intel Core2 Duo T6600 (-MCP-) 
               arch: Penryn rev.10 cache: 2048 KB
               flags: (lm nx sse sse2 sse3 sse4_1 ssse3) bmips: 8777
               clock speeds: max: 2200 MHz 1: 2194 MHz 2: 2194 MHz
    Memory:    Array-1 capacity: 8 GB devices: 2 EC: None
               Device-1: DIMM_A size: 2 GB speed: 800 MT/s type: DDR2
               part: HYMP125S64CP8-S6
               Device-2: DIMM_B size: 2 GB speed: 800 MT/s type: DDR2
               part: HYMP125S64CP8-S6
               Device-3: N/A size: N/A speed: N/A type: N/A part: N/A
               Device-4: N/A size: N/A speed: N/A type: N/A part: N/A
    Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV710/M92 [Mobility Radeon HD 4530/4570/545v]
               bus-ID: 01:00.0
               Display Server: X.org 1.19.6 driver: radeon
               tty size: 80x24 Advanced Data: N/A for root out of X
    Audio:     Card-1 Advanced Micro Devices [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
               driver: snd_hda_intel bus-ID: 01:00.1
               Card-2 Intel 82801I (ICH9 Family) HD Audio Controller
               driver: snd_hda_intel bus-ID: 00:1b.0
               Sound: ALSA v: k4.16.6-302.fc28.x86_64
    Network:   Card-1: Broadcom Limited BCM4312 802.11b/g LP-PHY
               driver: wl bus-ID: 04:00.0
               IF: wlp4s0 state: dormant mac: <filter>
               Card-2: Broadcom Limited NetLink BCM5784M Gigabit Ethernet PCIe
               driver: tg3 v: 3.137 bus-ID: 08:00.0
               IF: enp8s0 state: down mac: <filter>
    Drives:    HDD Total Size: 500.1GB (28.6% used)
               ID-1: /dev/sda model: WDC_WD5000BEVT size: 500.1GB temp: 30C
    Partition: ID-1: / size: 118G used: 20G (18%) fs: ext4 dev: /dev/sda7
               ID-2: /boot size: 477M used: 194M (44%) fs: ext4 dev: /dev/sda5
               ID-3: swap-1 size: 4.29GB used: 0.00GB (0%)
               fs: swap dev: /dev/sda6
    RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
    Sensors:   System Temperatures: cpu: 66.0C mobo: 50.0C gpu: 48.5
               Fan Speeds (in rpm): cpu: N/A fan-2: 2844 fan-3: 2844
    Info:      Processes: 265 Uptime: 5 min Memory: 1267.3/3909.5MB
               Init: systemd runlevel: 5 Gcc sys: 8.0.1
               Client: Shell (bash 4.4.191) inxi: 2.3.56
    On boot
    ...
    usb 3-1.3: unable to read config index 0 descriptor/all
    usb 3-1.3: can't read configurations, error -110
    ...
    Failed to start udev Wait for Complete Device Initialization.
    See 'systemctl status systemd-udev-settle.service' for details.
    ...
    Quote Originally Posted by systemctl status systemd-udev-settle.service
    systemd-udev-settle.service - udev Wait for Complete Device Initialization
    Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static; vendor preset: disabled)
    Active: failed (Result: exit-code) since Mon 2018-05-07 09:06:30 EEST; 9min ago
    Docs: man:udev(7)
    man:systemd-udevd.service(8)
    Process: 449 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/FAILURE)
    Main PID: 449 (code=exited, status=1/FAILURE)

    May 07 09:04:29 pc-fc systemd[1]: Starting udev Wait for Complete Device Initialization...
    May 07 09:06:30 pc-fc systemd[1]: systemd-udev-settle.service: Main process exited, code=exited, status=1/FAILURE
    May 07 09:06:30 pc-fc systemd[1]: systemd-udev-settle.service: Failed with result 'exit-code'.
    May 07 09:06:30 pc-fc systemd[1]: Failed to start udev Wait for Complete Device Initialization.
    Quote Originally Posted by journalctl -b -p 3
    -- Logs begin at Tue 2018-02-27 17:50:13 EET, end at Tue 2018-05-08 09:52:13 EEST. --
    May 08 09:34:57 pc-fc systemd[1]: Failed to start udev Wait for Complete Device Initialization.
    May 08 09:35:11 pc-fc bluetoothd[12896]: Failed to set mode: Blocked through rfkill (0x12)
    May 08 09:35:39 pc-fc kernel: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
    May 08 09:35:58 pc-fc wpa_supplicant[16337]: bgscan simple: Failed to enable signal strength monitoring
    May 08 09:36:58 pc-fc spice-vdagent[20131]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
    May 08 09:36:58 pc-fc bluetoothd[12896]: Failed to set mode: Blocked through rfkill (0x12)
    May 08 09:37:39 pc-fc spice-vdagent[22229]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
    May 08 09:37:41 pc-fc bluetoothd[12896]: Failed to set mode: Blocked through rfkill (0x12)
    May 08 09:38:26 pc-fc systemd-coredump[23763]: Process 20110 (packagekitd) of user 0 dumped core.

    Stack trace of thread 23406:
    #0 0x0000000000000000 n/a (n/a)
    May 08 09:38:35 pc-fc systemd-coredump[24133]: Process 24123 (abrt-action-ana) of user 0 dumped core.

    Stack trace of thread 24123:
    #0 0x00005624c5b54773 main (abrt-action-analyze-c)
    #1 0x00007ff0db54e1bb __libc_start_main (libc.so.6)
    #2 0x00005624c5b5487a _start (abrt-action-analyze-c)
    May 08 09:39:49 pc-fc kernel: sd 6:0:0:0: [sdb] No Caching mode page found
    May 08 09:39:49 pc-fc kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
    May 08 09:40:16 pc-fc kernel: sd 6:0:0:0: [sdb] No Caching mode page found
    May 08 09:40:16 pc-fc kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
    May 08 09:41:07 pc-fc kernel: CPU1: Core temperature above threshold, cpu clock throttled (total events = 375)
    May 08 09:43:21 pc-fc systemd[1]: Failed to start dnf makecache.
    May 08 09:47:04 pc-fc kernel: CPU1: Core temperature above threshold, cpu clock throttled (total events = 2422)
    May 08 09:49:27 pc-fc systemd-udevd[429]: inotify_add_watch(11, /dev/sdb, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[429]: inotify_add_watch(11, /dev/sdb1, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[435]: inotify_add_watch(11, /dev/sdb2, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[439]: inotify_add_watch(11, /dev/sdb3, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[429]: inotify_add_watch(11, /dev/sdb, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[439]: inotify_add_watch(11, /dev/sdb3, 10) failed: No such file or directory
    May 08 09:49:27 pc-fc systemd-udevd[429]: inotify_add_watch(11, /dev/sdb1, 10) failed: No such file or directory
    May 08 09:49:28 pc-fc systemd-udevd[435]: inotify_add_watch(11, /dev/sdb2, 10) failed: No such file or directory
    Quote Originally Posted by journalctl -f
    May 06 19:01:43 pc-fc systemd-udevd[459]: Process 'hid2hci --method=dell --devpath=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0' failed with exit code 1.
    May 06 19:01:43 pc-fc upowerd[17590]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0
    May 06 19:01:43 pc-fc systemd-udevd[459]: Process 'hid2hci --method=dell --devpath=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0' failed with exit code 1.
    May 06 19:01:43 pc-fc upowerd[17590]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0
    May 06 19:01:43 pc-fc systemd-udevd[459]: Process 'hid2hci --method=dell --devpath=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0' failed with exit code 1.
    Quote Originally Posted by top
    Code:
    PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
    452 root      20   0  229060 127096   7216 R  95.5  3.2   3:30.96 systemd-ud+
    459 root      20   0  121868  11856   6632 R  22.7  0.3   1:23.52 systemd-ud+
    695 root      20   0  265564   4952   4104 R   9.1  0.1   0:00.06 top
    Quote Originally Posted by lsusb
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 004: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 002: ID 1c4f:0026 SiGma Micro Keyboard
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 0c45:6417 Microdia Integrated Webcam
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 005: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth Mini-card
    Bus 003 Device 004: ID 413c:8158 Dell Computer Corp. Integrated Touchpad / Trackstick
    Bus 003 Device 003: ID 413c:8157 Dell Computer Corp. Integrated Keyboard
    Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    dmesg.zip
    How to fix this issue?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Screenshot from 2018-05-06 20-41-08.png 
Views:	16 
Size:	63.5 KB 
ID:	29589  
    Last edited by Ex_Soft; 8th May 2018 at 05:44 PM.

  2. #2
    Join Date
    Feb 2007
    Posts
    88

  3. #3
    Join Date
    Dec 2012
    Location
    santa barbara, CA
    Posts
    909

    Re: FC28: High cpu usage from systemd-udevd after upgrading to FC28

    did you try installing blueberry ?
    "monsters John ... monsters from the ID..."
    "ma vule teva maar gul nol naya"

Similar Threads

  1. FC28 - Few questions
    By Skeleton in forum Using Fedora
    Replies: 5
    Last Post: 10th May 2018, 02:25 PM
  2. Logitech QuickCam problem since upgrade to FC28
    By hm_shurt in forum Hardware & Laptops
    Replies: 2
    Last Post: 9th May 2018, 08:29 PM
  3. fc28 dnf update
    By oystercatcher in forum F28 Development Forum
    Replies: 1
    Last Post: 15th April 2018, 04:34 AM
  4. fc28 dnf upgrade fail
    By oystercatcher in forum F28 Development Forum
    Replies: 0
    Last Post: 20th March 2018, 03:47 PM
  5. fc28 nightly install
    By oystercatcher in forum F28 Development Forum
    Replies: 5
    Last Post: 15th March 2018, 05:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •