Hi.
Just installed Simple Scan on a recently updated Fedora 27 system.
I have an Epson L565 printer and scanner.
Simple Scan shows "Noname USB camera as scanning device.
Before upgrading to Fedora 27, I had Image Scan installed.
Though a bit more sophisticated, it did read the scanner.
After the upgrade, it didn't show up anymore.
Skanlite and Xsane are also detecting "Noname USB camera".
I ran
Code:
[root@hy ahm]# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x08d3) at libusb:001:003
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x045e, product=0x00f7) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
What can the problem be?