FedoraForum.org - Fedora Support Forums and Community
Results 1 to 9 of 9
  1. #1
    Join Date
    Oct 2006
    Location
    Mpumalanga, South Africa
    Posts
    72

    USB Issues

    Since installing Fedora 26, I have a bunch of USB issues. I have enabled EHCI in BIOS, which I found on other forums could be an issue, but it didn't resolve anything.

    No other USB, except for my keyboard and mouse, is working. dmesg shows the following
    Code:
    [  262.949063] usb 1-1.2: device descriptor read/64, error -32
    [  263.122077] usb 1-1.2: device descriptor read/64, error -32
    [  263.289078] usb 1-1.2: new full-speed USB device number 8 using ehci-pci
    [  263.354070] usb 1-1.2: device descriptor read/64, error -32
    [  263.522061] usb 1-1.2: device descriptor read/64, error -32
    [  263.689069] usb 1-1.2: new full-speed USB device number 9 using ehci-pci
    [  264.105047] usb 1-1.2: device not accepting address 9, error -32
    [  264.169055] usb 1-1.2: new full-speed USB device number 10 using ehci-pci
    [  264.585061] usb 1-1.2: device not accepting address 10, error -32
    [  264.585155] usb 1-1-port2: unable to enumerate USB device
    and then again...
    Code:
    [  338.340701] usb 2-1.6: device descriptor read/64, error -32
    [  338.511674] usb 2-1.6: device descriptor read/64, error -32
    [  338.678687] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
    [  339.043673] usb 2-1.6: new full-speed USB device number 7 using ehci-pci
    [  339.108669] usb 2-1.6: device descriptor read/64, error -32
    [  339.279660] usb 2-1.6: device descriptor read/64, error -32
    [  339.446657] usb 2-1.6: new full-speed USB device number 8 using ehci-pci
    [  339.511653] usb 2-1.6: device descriptor read/64, error -32
    [  339.679648] usb 2-1.6: device descriptor read/64, error -32
    [  339.846642] usb 2-1.6: new full-speed USB device number 9 using ehci-pci
    [  340.262647] usb 2-1.6: device not accepting address 9, error -32
    [  340.326615] usb 2-1.6: new full-speed USB device number 10 using ehci-pci
    [  340.742608] usb 2-1.6: device not accepting address 10, error -32
    [  340.742731] usb 2-1-port6: unable to enumerate USB device
    Any help please!

  2. #2
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    5,237

    Re: USB Issues

    what usb controller is this? are you using a hub? please post the output of the following commands

    Code:
    lspci
    lsusb

  3. #3
    Join Date
    Oct 2006
    Location
    Mpumalanga, South Africa
    Posts
    72

    Re: USB Issues

    Hi, yes there is a card reader connected on the motherboard. But none of the other USB slots are also working.

    lspci output:
    Code:
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:02.0 Display controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
    00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
    00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
    01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1)
    03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
    ... and lsusb output:
    Code:
    us 002 Device 004: ID 0461:4d51 Primax Electronics, Ltd 0Y357C PMX-MMOCZUL (B) [Dell Laser Mouse]
    Bus 002 Device 003: ID 04f2:0116 Chicony Electronics Co., Ltd KU-2971/KU-0325 Keyboard
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Thanks

  4. #4
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    5,237

    Re: USB Issues

    which ports aren't working? are they on the backplate of the mainboard or extra chassis ports connected via header cables? the usb chipset itself is fully supported by linux so there shouldn't be a kernel module fault there.

    check any installed usb header cables are attached correctly to the riser pins. that includes for the card reader. if in doubt consult the mainboard's user manual. it will have a pin diagram for the usb headers.

  5. #5
    Join Date
    Oct 2014
    Location
    Texas, USA
    Posts
    45

    Re: USB Issues

    Also try disconnecting ALL usb devices that are plugged into the motherboard connectors and use only the ports that are built in and see if the problem remains.
    That will tell you if this is a motherboard/fedora issue or if it is related to an attached device that may be causing problems

  6. #6
    Join Date
    Oct 2006
    Location
    Mpumalanga, South Africa
    Posts
    72

    Re: USB Issues

    Thanks! I've sorted 50% of the issues.

    When onluy keyboard and mouse connected - no error in dmesg - this is now solved as the previous time, already there were dmesg errors. I changed a pin on the motherboard, marked with usbpwr1~4.

    Now, the USB card reader is fine and recognising a USB. But when I try to use the other 2 onboard USB ports, or the front panel USB ports, I still get this message...
    Code:
    usb 1-1.3: new full-speed USB device number 7 using ehci-pci
    usb 1-1.3: device descriptor read/64, error -32
    usb 1-1.3: device descriptor read/64, error -32
    usb 1-1.3: new full-speed USB device number 8 using ehci-pci
    usb 1-1.3: device descriptor read/64, error -32
    usb 1-1.3: device descriptor read/64, error -32
    usb 1-1.3: new full-speed USB device number 9 using ehci-pci
    usb 1-1.3: device not accepting address 9, error -32
    usb 1-1.3: new full-speed USB device number 10 using ehci-pci
    usb 1-1.3: device not accepting address 10, error -32
    usb 1-1-port3: unable to enumerate USB device

  7. #7
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    5,237

    Re: USB Issues

    I changed a pin on the motherboard, marked with usbpwr1~4.
    that's a device power jumper setting not a pin. like I said, please check all cable connections to usb headers internally. you need to make sure you haven't shorted something by plugging in a USB cable the wrong way round or offset by a row of pins.

  8. #8
    Join Date
    Oct 2006
    Location
    Mpumalanga, South Africa
    Posts
    72

    Re: USB Issues

    Its now a loooong time that I've been struggling with my USB - all worked fine until an upgrade (I can't remember which one).

    I've checked all cables, all jumper settings, all power issues, removed a hub... everything I could get from these answers as well as from other posts. Still, no fix.

    Whenever I insert a USB mem stick or USB external HDD, its not been picked up on any of my PC's front panel USB or the remaining back panel USB (there is 4, 2 being used for keyboard and mouse).

    dmesg has this output...
    Code:
    [    0.000000] Linux version 4.12.13-300.fc26.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Thu Sep 14 16:00:38 UTC 2017
    Command line: BOOT_IMAGE=/vmlinuz-4.12.13-300.fc26.x86_64 root=/dev/mapper/fedora_fedora-root ro rd.lvm.lv=fedora_fedora/root rd.lvm.lv=fedora_fedora/swap rhgb quiet LANG=en_ZA.UTF-8 rd.driver.blacklist=nouveau
     ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
     ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
     ACPI: IRQ0 used by override.
     ACPI: IRQ9 used by override.
     Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.13-300.fc26.x86_64 root=/dev/mapper/fedora_fedora-root ro rd.lvm.lv=fedora_fedora/root rd.lvm.lv=fedora_fedora/swap rhgb quiet LANG=en_ZA.UTF-8 rd.driver.blacklist=nouveau
     ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
     ACPI: bus type PCI registered
     acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
     PCI: Using configuration type 1 for base access
     ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
     ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    CPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
     ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
     ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
     ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
     ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 *14 15)
     ACPI: bus type USB registered
     usbcore: registered new interface driver usbfs
     usbcore: registered new interface driver hub
     usbcore: registered new device driver usb
     PCI: Using ACPI for IRQ routing
    pnp: PnP ACPI: found 9 devices
    pci 0000:00:01.0: PCI bridge to [bus 01]
     pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
     pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf60fffff]
     pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
     pci 0000:00:1c.0: PCI bridge to [bus 02]
     pci 0000:03:00.0: PCI bridge to [bus 04]
    pci 0000:00:1c.3: PCI bridge to [bus 03-04]
     pci 0000:00:1c.5: PCI bridge to [bus 05]
     pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
     pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xec1fffff 64bit pref]
     ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     ehci-pci: EHCI PCI platform driver
    ehci-pci 0000:00:1a.0: EHCI Host Controller
     ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    ehci-pci 0000:00:1a.0: debug port 2
     ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
     ehci-pci 0000:00:1a.0: irq 23, io mem 0xf6108000
    ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
     usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
     usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     usb usb1: Product: EHCI Host Controller
     usb usb1: Manufacturer: Linux 4.12.13-300.fc26.x86_64 ehci_hcd
     usb usb1: SerialNumber: 0000:00:1a.0
     hub 1-0:1.0: USB hub found
     hub 1-0:1.0: 2 ports detected
    ehci-pci 0000:00:1d.0: EHCI Host Controller
    ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
     ehci-pci 0000:00:1d.0: debug port 2
    ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
     ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6107000
     ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
     usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     usb usb2: Product: EHCI Host Controller
     usb usb2: Manufacturer: Linux 4.12.13-300.fc26.x86_64 ehci_hcd
     usb usb2: SerialNumber: 0000:00:1d.0
    hub 2-0:1.0: USB hub found
     hub 2-0:1.0: 2 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
     usbcore: registered new interface driver usbserial
     usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial support registered for generic
     i8042: PNP: No PS/2 controller found.
     mousedev: PS/2 mouse device common for all mice
    usbcore: registered new interface driver usbhid
     usbhid: USB HID core driver
     usb 1-1: new high-speed USB device number 2 using ehci-pci
     usb 2-1: new high-speed USB device number 2 using ehci-pci
     usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
     hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
     usb 2-1: New USB device found, idVendor=8087, idProduct=0024
    usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
     hub 2-1:1.0: USB hub found
     hub 2-1:1.0: 6 ports detected
     usb 2-1.1: new low-speed USB device number 3 using ehci-pci
     tsc: Refined TSC clocksource calibration: 3092.973 MHz
     usb 2-1.1: New USB device found, idVendor=04f2, idProduct=0116
     usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
     usb 2-1.1: Product: USB Keyboard
    usb 2-1.1: Manufacturer: CHICONY
     input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04F2:0116.0001/input/input2
    [    1.532908] random: fast init done
     hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.1/input0
     random: crng init done
     usb 2-1.2: new low-speed USB device number 4 using ehci-pci
     usb 2-1.2: New USB device found, idVendor=0461, idProduct=4d51
     usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
     usb 2-1.2: Product: DELL Laser Mouse
    input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0461:4D51.0002/input/input3
    hid-generic 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1d.0-1.2/input0
     usb 2-1.6: new full-speed USB device number 5 using ehci-pci
     usb 2-1.6: device descriptor read/64, error -32
     usb 2-1.6: device descriptor read/64, error -32
     usb 2-1.6: new full-speed USB device number 6 using ehci-pci
     usb 2-1.6: device descriptor read/64, error -32
     systemd-journald[218]: Received SIGTERM from PID 1 (systemd).
     usb 2-1.6: device descriptor read/64, error -32
     systemd: 22 output lines suppressed due to ratelimiting
     clocksource: Switched to clocksource tsc
     usb 2-1.6: new full-speed USB device number 7 using ehci-pci
     usb 2-1.6: device not accepting address 7, error -32
     usb 2-1.6: new full-speed USB device number 8 using ehci-pci
     systemd[1]: Relabelled /dev and /run in 17.645ms.
     usb 2-1.6: device not accepting address 8, error -32
     usb 2-1-port6: unable to enumerate USB device
     usb 1-1.4: new full-speed USB device number 3 using ehci-pci
     usb 1-1.4: device descriptor read/64, error -32
    usb 1-1.4: device descriptor read/64, error -32
     usb 1-1.4: new full-speed USB device number 4 using ehci-pci
     usb 1-1.4: device descriptor read/64, error -32
    usb 1-1.4: device descriptor read/64, error -32
    usb 1-1.4: new full-speed USB device number 5 using ehci-pci
    usb 1-1.4: device not accepting address 5, error -32
    usb 1-1.4: new full-speed USB device number 6 using ehci-pci
    usb 1-1.4: device not accepting address 6, error -32
     usb 1-1-port4: unable to enumerate USB device
     EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
     usb 1-1.3: new full-speed USB device number 7 using ehci-pci
     usb 1-1.3: device descriptor read/64, error -32
    usb 1-1.3: device descriptor read/64, error -32
     usb 1-1.3: new full-speed USB device number 8 using ehci-pci
    [441769.555541] usb 1-1.3: device descriptor read/64, error -32
    [441769.723532] usb 1-1.3: device descriptor read/64, error -32
    [441769.890551] usb 1-1.3: new full-speed USB device number 9 using ehci-pci
    [441770.306558] usb 1-1.3: device not accepting address 9, error -32
    [441770.370559] usb 1-1.3: new full-speed USB device number 10 using ehci-pci
    [441770.786566] usb 1-1.3: device not accepting address 10, error -32
    [441770.786757] usb 1-1-port3: unable to enumerate USB device
    [521546.583110] usb 1-1.3: new full-speed USB device number 11 using ehci-pci
    [521546.648142] usb 1-1.3: device descriptor read/64, error -32
    [521546.822109] usb 1-1.3: device descriptor read/64, error -32
    [521546.989113] usb 1-1.3: new full-speed USB device number 12 using ehci-pci
    [521547.054088] usb 1-1.3: device descriptor read/64, error -32
    [521547.222117] usb 1-1.3: device descriptor read/64, error -32
    [521547.389119] usb 1-1.3: new full-speed USB device number 13 using ehci-pci
    [521547.805129] usb 1-1.3: device not accepting address 13, error -32
    [521547.869129] usb 1-1.3: new full-speed USB device number 14 using ehci-pci
    [521548.285138] usb 1-1.3: device not accepting address 14, error -32
    [521548.285202] usb 1-1-port3: unable to enumerate USB device
    The "red" issues being DSSP name space lookup failure and
    usb 2-1.6 device descriptoer read/64, error -32
    and
    usb 2-1.6 device not accepting address 8, error -32
    usb 2-1-port6 unable to enumerate USB device
    Then again
    sb 1-1.4: device descriptor read/64, error -32
    usb 1-1-port4: unable to enumerate USB device
    and
    usb 1-1-port4: unable to enumerate USB device
    usb 1-1-port3: unable to enumerate USB device
    .

    I don't know where to try and find the issue anymore.

  9. #9
    Join Date
    Jul 2005
    Posts
    828

    Re: USB Issues

    Some BIOS allow disabling certain usb ports with a setting in setup. You may want to take a look in your BIOS setup for your machine.
    ======
    Doug G
    ======

Similar Threads

  1. Replies: 5
    Last Post: 20th August 2015, 06:56 AM
  2. updater issues and yum issues
    By chris53 in forum Using Fedora
    Replies: 12
    Last Post: 23rd June 2010, 11:36 AM
  3. issues with yum gui
    By willedoit in forum Fedora 13 Development Branch
    Replies: 0
    Last Post: 18th April 2010, 05:03 AM
  4. fedora 9 issues - nVIDIA issues. Help please!
    By pinoyboy in forum Using Fedora
    Replies: 8
    Last Post: 12th June 2008, 11:04 AM
  5. Yum issues
    By anton_pm in forum Using Fedora
    Replies: 2
    Last Post: 30th May 2007, 02:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •