Wireless USB headset stopped working after F13 --> F14, and volume control crashing
FedoraForum.org - Fedora Support Forums and Community
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2009
    Posts
    27

    Wireless USB headset stopped working after F13 --> F14, and volume control crashing

    Edit: I withdraw it. After a restart I cannot reproduce this bug anymore.

    My orginal post:
    I have a Logitech wireless headset. It used to work without problems under F13, but now doesn't.
    I still can find it as recognized usb device (see below). In gnome-volume-control -> preferences I am unable to select it as an input or output device (it is not listed there) but it is listed under tab "devices". However if I try to test it, I get a CRASH of gnome-volume-control and abrt pops upt.
    From the stack output it looks like it is crashing in glibc, libgio or so (nothing closely related to gnome-volume-control)


    from /proc/bus/usb/devices:
    Code:
    T:  Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=046d ProdID=0a12 Rev= 1.00
    S:  Manufacturer=Logitech
    S:  Product=Logitech Wireless Headset
    C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
    I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
    I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
    E:  Ad=01(O) Atr=09(Isoc) MxPS= 288 Ivl=1ms
    I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
    I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
    E:  Ad=82(I) Atr=05(Isoc) MxPS=  32 Ivl=1ms
    I:* If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
    E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
    Code:
    lsmod | grep snd
    snd_usb_audio          90338  0 
    snd_usb_lib            17502  1 snd_usb_audio
    snd_emu10k1_synth       5788  0 
    snd_emux_synth         34063  1 snd_emu10k1_synth
    snd_seq_virmidi         4583  1 snd_emux_synth
    snd_seq_midi_emul       5238  1 snd_emux_synth
    snd_emu10k1           141454  2 snd_emu10k1_synth
    snd_rawmidi            20605  3 snd_usb_lib,snd_seq_virmidi,snd_emu10k1
    snd_ac97_codec        115547  1 snd_emu10k1
    ac97_bus                1330  1 snd_ac97_codec
    snd_seq_dummy           1742  0 
    snd_seq_oss            31066  0 
    snd_seq_midi_event      6242  2 snd_seq_virmidi,snd_seq_oss
    snd_seq                53005  8 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_pcm_oss            40014  0 
    snd_mixer_oss          14653  1 snd_pcm_oss
    snd_pcm                80324  4 snd_usb_audio,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
    snd_seq_device          6159  7 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
    snd_timer              19882  3 snd_emu10k1,snd_seq,snd_pcm
    snd_page_alloc          7437  2 snd_emu10k1,snd_pcm
    snd_util_mem            3368  2 snd_emux_synth,snd_emu10k1
    snd_hwdep               6454  3 snd_usb_audio,snd_emux_synth,snd_emu10k1
    snd                    62913  20 snd_usb_audio,snd_usb_lib,snd_emu10k1_synth,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_seq_dummy,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
    Last edited by merilius; 8th November 2010 at 10:03 AM.

Similar Threads

  1. Volume control not working properly
    By volksvagen in forum Using Fedora
    Replies: 3
    Last Post: 2nd May 2010, 02:19 AM
  2. Volume control buttons not working in Fedora 11
    By zorgoth in forum Using Fedora
    Replies: 5
    Last Post: 1st September 2009, 07:58 PM
  3. Replies: 0
    Last Post: 13th November 2007, 11:29 AM
  4. volume control not working after installing oss drivers
    By hilbert24 in forum Hardware & Laptops
    Replies: 5
    Last Post: 31st August 2007, 06:54 PM
  5. Replies: 2
    Last Post: 26th March 2006, 09:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •