FedoraForum.org - Fedora Support Forums and Community
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2009
    Location
    Philadelphia
    Posts
    59

    launching Xilinx Webpack ISE

    hi all,

    since ive started using fedora about a month ago i am still finding it difficult to launch newly installed programs. in most cases i just travel to the installation directory and look for a tell-tale file name to try an launch and if it works write up a script for it.

    however, there are a few hundred folders and a few thousand files in this Xilinx installation and a fairly thorough search came up empty. does anyone know how to launch it, and better yet, is there a better way for future installations rather than trial by fire?

  2. #2
    PabloTwo's Avatar
    PabloTwo is offline "Registered User" T-Shirt Winner
    Join Date
    Mar 2007
    Location
    Seville, FL
    Posts
    7,566
    Here is one suggestion. It's what I do when installing from source code. Assuming the last step of the install procedure is: make install
    Code:
    make install | tee installed-programname
    All of the ouput to screen during the make install run is piped to tee, which both displays the output to screen (same as it would normally without the added "| tee filename" bit) and writes the output to the file that you gave as a name in the command.

    When the install is complete, then you can:
    Code:
     cat installed-programname | grep install
    If the output of that is too much and you only are looking for the executables, then you could use
    Code:
     cat installed-programname | grep "bin/"


    ---------- Post added at 12:30 PM CST ---------- Previous post was at 12:24 PM CST ----------

    Another method is to, after installing:
    Code:
    su
    updatedb
    exit
    locate programname | grep "bin/"
    Last edited by PabloTwo; 21st January 2010 at 06:32 PM.

  3. #3
    Join Date
    Dec 2009
    Posts
    76

    Re: launching Xilinx Webpack ISE

    My Xilinx installation of version 12.3 is located inside of /opt/Xilinx/12.3/. The location of the settings to start Xilinx is either in lin or lin64. The file is either a csh or sh. There also are two version of each of the csh and sh versions of the initialization files, one for each architecture. The file to initialize the editor and tools for Verilog and V.H.D.L. editing is "ise".

    I specifically use /opt/Xilinx/12.3/ISE_DS/ISE/bin/lin64/ise as the location of the executable in my installation.
    To run the program I created the file /usr/local/bin/xilinx. This is a copy of the /opt/Xilinx/12.3/ISE_DS/settings64.sh file with two additional lines.
    "export DISPLAY:=0"
    "exec /opt/Xilinx/12.3/ISE_DS/ISE/bin/lin64/ise"

    If you want to create a menu entry, the file location of the Icon is /opt/Xilinx/12.3/ISE_DS/ISE/data/images/pn-ise.png.
    You can create a menu item using the program Main Menu (sudo yum install alacarte), or you can create the text file yourself and place it in /usr/share/applications/ named as something like xilinx.desktop, or whatever you want with the .desktop extension.

  4. #4
    Join Date
    Dec 2010
    Posts
    8

    Re: launching Xilinx Webpack ISE

    Quote Originally Posted by gatlin
    My Xilinx installation of version 12.3 is located inside of /opt/Xilinx/12.3/. .
    Gatlin or anyone else:
    wondering if you could help me as well, I am trying to get Xilinx 12.3 installed on Fedora 14 (in a vm under mac os x).

    I saw that some had success with fedora 12, but I get crashes when I attempt to urn the fedora 12 live-cd under virtual box.

    When I mount the Xilinx installation files, when I run ./xsetup, I just get a prompt. I turned off SELinux, and checked to see if I had the right libraries (lesstif instead of motif), but I still get nothing (the script does eventually call ./bin/lin64/xsetup, but that dies)

    strace on xsetup shows a number of libraries missing, but its hard to tell if its the libraries missing or a path to the libraries that are missing.

    any help would be appreciated - I sure don't wanna run windows in a vm, but I may have to.

    john

  5. #5
    Join Date
    Dec 2009
    Posts
    76

    Re: launching Xilinx Webpack ISE

    My first question is if you have installed Fedora 14 from the iso or not?
    If having problems installing Xilinx:
    Disable SELinux
    Install OpenMotif from the package manager (I would recommend the development files too and maybe debug)
    Install e2fsprogs (development files too maybe) & port reserve (they should both already be installed)
    Reference http://www.xilinx.com/support/answers/20944.htm
    I am using real hardware, but I am not sure if being incapable of installing is a problem which can be attributed to Linux on Virtual Box.

    You might try looking thru the readme files and such to check for library dependencies.

Similar Threads

  1. Launching Package Kit
    By rando1000 in forum Using Fedora
    Replies: 4
    Last Post: 26th September 2008, 01:23 AM
  2. How to stop X from launching?
    By fra in forum Installation, Upgrades and Live Media
    Replies: 4
    Last Post: 14th September 2007, 06:10 AM
  3. Xilinx printer issue
    By jimblah in forum Using Fedora
    Replies: 2
    Last Post: 4th November 2006, 09:53 PM
  4. NOT Launching Programs
    By CheezyArmpit in forum Using Fedora
    Replies: 7
    Last Post: 2nd June 2006, 08:35 PM
  5. up2date Launching ??
    By JulianYorke in forum Using Fedora
    Replies: 4
    Last Post: 24th April 2005, 01:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •