But yet no modules in the system, and no /dev/dahdi devices. Anyone have any ideas on this?Code:... Installed: asterisk-dahdi.x86_64 0:1.6.0.15-1.fc10 dahdi-tools.x86_64 0:2.0.0-1.fc10 dahdi-tools-libs.x86_64 0:2.0.0-1.fc10 Dependency Installed: asterisk.x86_64 0:1.6.0.15-1.fc10 [^v^] service asterisk restart Stopping asterisk: [FAILED] Starting asterisk: [ OK ] [^v^] service dahdi restart Unloading DAHDI hardware modules: [ OK ] Loading DAHDI hardware modules: FATAL: Module dahdi not found. wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] xpp_usb: [ OK ] [^v^] yum info asterisk-dahdi ... Installed Packages Name : asterisk-dahdi Arch : x86_64 Version : 1.6.0.15 Release : 1.fc10 Size : 509 k Repo : installed From repo : updates Summary : Modules for Asterisk that use DAHDI URL : http://www.asterisk.org/ License : GPLv2 Description: Modules for Asterisk that use DAHDI. [^v^] dahdi_cfg Notice: Configuration file is /etc/dahdi/system.conf line 0: Unable to open master device '/dev/dahdi/ctl' 1 error(s) detected [^v^] modprobe dahdi FATAL: Module dahdi not found. [^v^] modprobe dahdi_dummy FATAL: Module dahdi_dummy not found. [^v^] dahdi_test Unable to open dahdi interface: No such file or directory [^v^]
Results 1 to 10 of 10
-
30th September 2009, 04:43 AM #1
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
[SOLVED] asterisk-dahdi does not install modules?
Last edited by Vector; 17th November 2010 at 03:47 AM.
-
26th November 2009, 06:07 AM #2
Registered User
- Join Date
- Nov 2009
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have the same problem in fc12. Did you ever work out a solution other than building the modules from source (which on fc12 throw all sorts of errors)?
-
26th November 2009, 06:13 AM #3
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Well i did, and it was 12-beta. I had to compile it. The thing that i found out was that the asterisk-dahdi package is only a set of TOOLS to work with the dahdi modules. Now, if you were using AsteriskNOW (and i think also CentOS, because that is what it is derived from), you could yum the package for the modules; but that is because it is the official distro of asterisk. But for Fedora*, you MUST compile them. I don't remember what the dependencies are, because i went back to F10 (but now must to back to F12 because i need newer hplip drivers!).
-
26th November 2009, 10:29 AM #4
Registered User
- Join Date
- Nov 2009
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
do you happen to remember how you got it to build? in fc12 the source doesnt build and i havent been able to work out why. am getting the following error when i run make;
CC [M] /usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.o
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c: In function ‘wctc4xxp_net_register’:
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:776: error: ‘struct net_device’ has no member named ‘set_multicast_list’
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:777: error: ‘struct net_device’ has no member named ‘open’
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:778: error: ‘struct net_device’ has no member named ‘stop’
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:779: error: ‘struct net_device’ has no member named ‘hard_start_xmit’
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:780: error: ‘struct net_device’ has no member named ‘get_stats’
/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.c:781: error: ‘struct net_device’ has no member named ‘do_ioctl’
make[3]: *** [/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp/base.o] Error 1
make[2]: *** [/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi/wctc4xxp] Error 2
make[1]: *** [_module_/usr/src/dahdi-linux-2.2.0.2/drivers/dahdi] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
make: *** [modules] Error 2
-
26th November 2009, 05:29 PM #5
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Try:
Then after that try the normal:Code:yum -y install dahdi-tools kernel-devel kernel-headers
I could be wrong on that last part, but the instructions for it are in the readme in the packages folder.Code:cd Desktop/dahdi-linux* ./configure make distclean make make install
-
26th November 2009, 10:20 PM #6
Registered User
- Join Date
- Nov 2009
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
yeah the default build process doesnt work on a fc12 machine though. the solution i have arrived at (just in case anyone else runs into this issue) is to comment out the following line in drivers/dahdi/Kbuild.
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTC4XXP) += wctc4xxp/
after that, the make and install process runs perfectly. i dont have hardware that uses wctc4xxp, so this worked for me, but will still be an issue for anyone that has that hardware.
thanks for your help.
-
26th November 2009, 10:27 PM #7
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Don't forget to comment out ALL of the hardware modules (i think it's in /etc/dahdi/dahdi.conf).
-
26th November 2009, 10:30 PM #8
Registered User
- Join Date
- Nov 2009
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
i did see a reference to commenting out the modules. what effect does this have? should this only be done if i am getting errors? at this point i havent commented the modules out and it appears to be working fine, but i could be wrong.
-
26th November 2009, 10:36 PM #9
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
You don't have that hardware, so you don't want those modules loaded. I can't remember what it does if you fail to comment them, but it is a nuisance.
-
17th November 2010, 03:51 AM #10
Banned
- Join Date
- Jul 2006
- Location
- Transgression
- Age
- 39
- Posts
- 1,182
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
[SOLVED] asterisk-dahdi does not install modules?
Got a solution:
Code:[^v^]# yum list *dahdi* Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list Installed Packages asterisk-dahdi.i686 1.6.2.12-0.1.rc1.fc14 @fedora dahdi-tools.i686 2.1.0.2-10.fc14 @fedora dahdi-tools-libs.i686 2.1.0.2-10.fc14 @fedora Available Packages dahdi-tools-devel.i686 2.1.0.2-10.fc14 fedora [^v^]# [^v^]# [^v^]# [^v^]# rpm --import http://packages.atrpms.net/RPM-GPG-KEY.atrpms [^v^]# [^v^]# [^v^]# [^v^]# vi /etc/yum.repos.d/atrpms.repo [atrpms] name=Fedora Core $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/f$releasever-$basearch/atrpms/stable gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms gpgcheck=1 enabled=0 [^v^]# [^v^]# [^v^]# [^v^]# yum list *dahdi* --enablerepo=atrpms Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list atrpms | 3.0 kB 00:00 atrpms/primary_db | 515 kB 00:01 Installed Packages asterisk-dahdi.i686 1.6.2.12-0.1.rc1.fc14 @fedora dahdi-tools.i686 2.1.0.2-10.fc14 @fedora dahdi-tools-libs.i686 2.1.0.2-10.fc14 @fedora Available Packages dahdi-linux.i686 2.4.0-69.fc14 atrpms dahdi-linux-devel.i686 2.4.0-69.fc14 atrpms dahdi-linux-kmdl-2.6.35.6-48.fc14.i686 2.4.0-69.fc14 atrpms dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE.i686 2.4.0-69.fc14 atrpms dahdi-linux-kmdl-2.6.35.6-48_1.cubbi_tuxonice.fc14.i686 2.4.0-69.fc14 atrpms dahdi-linux-kmdl-2.6.35.6-48_1.cubbi_tuxonice.fc14.PAE.i686 2.4.0-69.fc14 atrpms dahdi-tools.i686 1:2.4.0-67.fc14 atrpms dahdi-tools-devel.i686 1:2.4.0-67.fc14 atrpms [^v^]# [^v^]# [^v^]# [^v^]# yum install dahdi-linux --enablerepo=atrpms Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package dahdi-linux.i686 0:2.4.0-69.fc14 set to be installed --> Processing Dependency: dahdi-linux-kmdl-2.4.0-69.fc14 for package: dahdi-linux-2.4.0-69.fc14.i686 atrpms/filelists_db | 1.0 MB 00:01 fedora/filelists_db | 17 MB 00:20 updates/filelists_db | 2.6 MB 00:03 --> Running transaction check ---> Package dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE.i686 0:2.4.0-69.fc14 set to be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: dahdi-linux i686 2.4.0-69.fc14 atrpms 2.4 M Installing for dependencies: dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE i686 2.4.0-69.fc14 atrpms 485 k Transaction Summary ================================================================================ Install 2 Package(s) Total download size: 2.9 M Installed size: 4.4 M Is this ok [y/N]: y Downloading Packages: Setting up and reading Presto delta metadata Processing delta metadata Package(s) data still to download: 2.9 M (1/2): dahdi-linux-2.4.0-69.fc14.i686.rpm | 2.4 MB 00:03 (2/2): dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE-2.4.0-69.fc | 485 kB 00:00 -------------------------------------------------------------------------------- Total 652 kB/s | 2.9 MB 00:04 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : dahdi-linux-2.4.0-69.fc14.i686 1/2 Installing : dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE-2.4.0-69.fc14.i6 2/2 Installed: dahdi-linux.i686 0:2.4.0-69.fc14 Dependency Installed: dahdi-linux-kmdl-2.6.35.6-48.fc14.PAE.i686 0:2.4.0-69.fc14 Complete! [^v^]# [^v^]# [^v^]# [^v^]# service dahdi restart Unloading DAHDI hardware modules: doneLoading DAHDI hardware modules: No hardware timing source found in /proc/dahdi, loading dahdi_dummy Running dahdi_cfg: [ OK ] [^v^]# [^v^]# [^v^]# [^v^]# service asterisk restart Stopping asterisk: [ OK ] Starting asterisk: [ OK ] [^v^]# [^v^]# [^v^]# [^v^]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.996% 99.065% 99.994% 99.992% 99.993% 99.993% ^C --- Results after 6 passes --- Best: 99.996 -- Worst: 99.065 -- Average: 99.838687, Difference: 99.838686 [^v^]#
---------- Post added at 09:51 PM GMT ---------- Previous post was at 09:47 PM GMT ----------
This is confirmed to be working on my LIVE Fedora 14 server. No compiling, just yum
:
Code:[^v^]# asterisk -rvvvvvvvvvvvvv Asterisk 1.6.2.12-rc1, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= == Parsing '/etc/asterisk/asterisk.conf': == Found == Parsing '/etc/asterisk/extconfig.conf': == Found Connected to Asterisk 1.6.2.12-rc1 currently running on pty12335b (pid = 15944) Verbosity was 0 and is now 13 pty12335b*CLI> pty12335b*CLI> pty12335b*CLI> pty12335b*CLI> == Using SIP RTP CoS mark 5 == Using SIP VRTP CoS mark 6 -- Executing [100@office:1] Answer("SIP/out-business-00000000", "") in new stack -- Executing [100@office:2] Wait("SIP/out-business-00000000", "1") in new stack -- Executing [100@office:3] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:4] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:5] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:6] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:7] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:8] GotoIf("SIP/out-business-00000000", "0?097,1") in new stack -- Executing [100@office:9] BackGround("SIP/out-business-00000000", "menu-personal-1") in new stack -- <SIP/out-business-00000000> Playing 'menu-personal-1.ulaw' (language 'en') == CDR updated on SIP/out-business-00000000 -- Executing [098@office:1] MixMonitor("SIP/out-business-00000000", "Conference.wav,a") in new stack -- Executing [098@office:2] MeetMe("SIP/out-business-00000000", "098,M") in new stack == Parsing '/etc/asterisk/meetme.conf': == Found -- Created MeetMe conference 1023 for conference '098' == Begin MixMonitor Recording SIP/out-business-00000000 -- <SIP/out-business-00000000> Playing 'conf-getpin.ulaw' (language 'en') -- <SIP/out-business-00000000> Playing 'conf-invalidpin.ulaw' (language 'en') -- <SIP/out-business-00000000> Playing 'conf-getpin.ulaw' (language 'en') > Starting recording of MeetMe Conference 098 into file (null).(null). -- <SIP/out-business-00000000> Playing 'conf-onlyperson.ulaw' (language 'en') -- Started music on hold, class 'default', on SIP/out-business-00000000 -- Stopped music on hold on SIP/out-business-00000000 -- Started music on hold, class 'default', on SIP/out-business-00000000 -- Stopped music on hold on SIP/out-business-00000000 -- Hungup 'DAHDI/pseudo-352096823' == Spawn extension (office, 098, 2) exited non-zero on 'SIP/out-business-00000000' == MixMonitor close filestream == End MixMonitor Recording SIP/out-business-00000000 pty12335b*CLI> exit Executing last minute cleanups [^v^]#
Reply With QuoteSimilar Threads
-
Asterisk ztdummy compiled, but not loaded, even afer asterisk reinstall?
By Vector in forum Servers & NetworkingReplies: 3Last Post: 14th September 2009, 07:31 PM -
I had a problem when install the dahdi-linux and dahdi-tools ( Asterisk server)
By starving_wages in forum Servers & NetworkingReplies: 2Last Post: 24th February 2009, 07:09 AM -
how to use yum to install perl modules?
By aliber4079 in forum Using FedoraReplies: 3Last Post: 26th November 2007, 04:08 AM -
Fedora 5 to install Asterisk?
By littlebigfred in forum Using FedoraReplies: 2Last Post: 27th June 2006, 04:25 AM -
Configuring PHP - How do I install modules?
By kphi in forum Servers & NetworkingReplies: 8Last Post: 5th September 2005, 10:18 PM
