<---- template headericclude ----->
X Hangs at "Initializing int10"
FedoraForum.org - Fedora Support Forums and Community
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2008
    Posts
    11
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    X Hangs at "Initializing int10"

    Hi all. I'm upgrading from Fedora 6 to Fedora 10. I did a clean install of Fedora 10 and then, as the default X config didn't work, I copied across my old xorg.conf file. Naturally I had to comment out a few lines in that file.

    Now a word on my setup. I have two screens, one hanging off an nVidia card, and the other on a SiS card. Both of them work just fine under Fedora 6.

    Anyway, after I did the steps above, I found it didn't work, so I've been trying one screen at a time. The SiS one works (unless I install the proprietary nVidia driver, so I removed that). The nVidia one doesn't work. I've tried the nv driver, the fbdev driver, and the vesa driver, all of which failed, although not always with the same error message. As nv is the one that worked with Fedora 6, that's the way I'd prefer to go (because it should be possible).

    When I try to use the nv driver, the console appears to be hung, but it's still possible to ssh into the machine. The last entry in the log read as follows:

    Code:
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) NV(0): Initializing int10
    The last line you see is the last line in the file. I tried the NoInt10 option, and then it seemed to get a lot further, but eventually failed with "Fatal server error: AddScreen/ScreenInit failed for driver 0".

    I'll attach my xorg.conf and my X.0.log; any help would be appreciated.

    Code:
    # Xorg configuration created by system-config-display
    
    Section "ServerLayout"
    	Identifier     "single head configuration"
    	Screen      0  "Screen0" 0 0
    #	Screen      1  "Screen1" RightOf "Screen0"
    	InputDevice    "Mouse0" "CorePointer"
    	InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    
    Section "Files"
    
    # RgbPath is the location of the RGB database.  Note, this is the name of the 
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, Red Hat 6.0 and later now use a font server independent of
    # the X server to render fonts.
    	FontPath     "unix/:7100"
    EndSection
    
    Section "Module"
    	Load  "dbe"
    	Load  "extmod"
    	Load  "fbdevhw"
    	Load  "glx"
    #	Load  "record"
    	Load  "freetype"
    #	Load  "type1"
    	Load  "dri"
    EndSection
    
    Section "InputDevice"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #	Option	"Xleds"		"1 2 3"
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    #	Option	"XkbDisable"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #	Option	"XkbModel"	"pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    #	Option	"XkbModel"	"microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #	Option	"XkbLayout"	"de"
    # or:
    #	Option	"XkbLayout"	"de"
    #	Option	"XkbVariant"	"nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #	Option	"XkbOptions"	"ctrl:swapcaps"
    # Or if you just want both to be control, use:
    #	Option	"XkbOptions"	"ctrl:nocaps"
    #
    	Identifier  "Keyboard0"
    	Driver      "kbd"
    	Option	    "XkbModel" "pc105"
    	Option	    "XkbLayout" "us"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "IMPS/2"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "ZAxisMapping" "4 5"
    	Option	    "Emulate3Buttons" "yes"
    EndSection
    
    Section "Monitor"
     ### Comment all HorizSync and VertSync values to use DDC:
    	Identifier   "Monitor0"
    	VendorName   "Monitor Vendor"
    	ModelName    "DPC3770"
    	DisplaySize  320	240
     ### Comment all HorizSync and VertSync values to use DDC:
    	HorizSync    30.0 - 70.0
    	VertRefresh  50.0 - 160.0
    	Option	    "dpms"
    EndSection
    
    # Manual for this monitor says: VESA/60 = 1024x768 = 48.36kHz (horizontal frequency) = 60Hz (Vertical frequency)
    
    
    Section "Monitor"
     ### Comment all HorizSync and VertSync values to use DDC:
    	Identifier   "Monitor1"
    	VendorName   "Monitor Vendor"
    	ModelName    "DPC3770"
    	DisplaySize  280	210
     ### Comment all HorizSync and VertSync values to use DDC:
    	HorizSync    30.0 - 70.0
    #	VertRefresh  50.0 - 160.0
    #	VertRefresh  80.0 - 160.0
    	VertRefresh  50.0 - 85.0
    	Option	    "dpms"
    EndSection
    
    Section "Device"
    	Identifier  "Videocard1"
    	Driver      "sis"
    	VendorName  "Silicon Integrated Systems"
    	BoardName   "SiS 86C326"
    	BusID		"PCI:2:2:0"
    EndSection
    
    Section "Device"
    	Identifier  "Videocard0"
    	Driver      "nv"
    	VendorName  "Videocard vendor"
    	BoardName   "NVIDIA GeForce 4 (generic)"
    	BusID		"PCI:1:0:0"
    #	Option      "NoInt10" "Yes"
    EndSection
    
    Section "Screen"
    	Identifier "Screen0"
    	Device     "Videocard0"
    	Monitor    "Monitor0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     16
    		Modes    "800x600" "640x480"
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    #		Modes    "800x600" "640x480"
    		Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    	EndSubSection
    EndSection
    
    Section "Screen"
    	Identifier "Screen1"
    	Device     "Videocard1"
    	Monitor    "Monitor1"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     16
    		Modes    "800x600" "640x480"
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    #		Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    		Modes    "1024x768" "800x600" "640x480"
    	EndSubSection
    EndSection
    
    Section "DRI"
    	Group        0
    	Mode         0666
    EndSection
    ...and the log in the next post.

  2. #2
    Join Date
    Dec 2008
    Posts
    11
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    The first half of the log

    The log wouldn't fit in the previous post, nor this one.
    Code:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.18-92.1.10.el5 i686 
    Current Operating System: Linux rhys.nelson.org.au 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
    Build Date: 16 November 2008  08:29:02PM
    Build ID: xorg-x11-server 1.5.3-5.fc10 
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  1 13:04:10 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "single head configuration"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Videocard0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AIGLX" "on"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path catalogue:/etc/X11/fontpath.d,built-ins.
    (**) FontPath set to:
    	unix/:7100,
    	catalogue:/etc/X11/fontpath.d,
    	built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81f4400
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 4.1
    	X.Org XInput driver : 2.1
    	X.Org Server Extension : 1.1
    	X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    
    (--) PCI: (0@1:0:0) nVidia Corporation NV17 [GeForce4 MX 440] rev 163, Mem @ 0xf0000000/0, 0xe0000000/0, 0xe8000000/0, BIOS @ 0x????????/131072
    (--) PCI:*(0@2:2:0) Silicon Integrated Systems [SiS] 86C326 5598/6326 rev 11, Mem @ 0xf4000000/0, 0xf3000000/0, I/O @ 0x00009800/0, BIOS @ 0x????????/65536
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "fbdevhw"
    
    (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 0.0.2
    	ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.3, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (**) AIGLX enabled
    (**) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SELinux
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource

  3. #3
    Join Date
    Dec 2008
    Posts
    11
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    The second half of the log

    Code:
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nv"
    
    (II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
    (II) Module nv: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.1.12
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 4.1
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
    	Quadro FX 540, GeForce 6200, GeForce 6500,
    	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
    	GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
    	GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
    	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
    	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
    	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
    	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
    	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
    	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
    	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
    	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
    	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
    	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
    	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
    	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
    	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
    	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
    	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
    	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
    	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
    	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
    	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
    	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
    	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
    	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
    	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
    	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
    	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
    	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
    	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
    	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
    (II) Primary Device is: PCI 02@00:02:0
    (--) NV: Found NVIDIA GeForce4 MX 440 at 01@00:00:0
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.3, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) NV(0): Initializing int10
    The vesa driver failed at the same point.

  4. #4
    Join Date
    Dec 2008
    Posts
    11
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Found partial answer

    http://lists.freedesktop.org/archive...er/040970.html

    To summarise: "Most of the setups with 2 graphics cards are broken in xserver 1.5.x."

Similar Threads

  1. Installation hangs at "Initializing Hardware..."
    By Curlified in forum Installation, Upgrades and Live Media
    Replies: 0
    Last Post: 29th August 2009, 10:03 AM
  2. Doom 3 crashes at "Initializing Menus"
    By piga in forum Using Fedora
    Replies: 3
    Last Post: 3rd May 2008, 12:56 AM
  3. hanging on "initializing hardware...storage network"
    By Mark Venzke in forum Hardware
    Replies: 0
    Last Post: 19th December 2005, 11:54 PM
  4. FC3 boot hang after DURING "initializing hardware"...
    By raffe in forum EOL (End Of Life) Versions
    Replies: 4
    Last Post: 27th February 2005, 09:59 AM
  5. Replies: 4
    Last Post: 7th January 2005, 02:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
[[template footer(Guest)]]