upgrade from Fedora core 6 to fedora 7 problem
FedoraForum.org - Fedora Support Forums and Community
Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    289

    Exclamation upgrade from Fedora core 6 to fedora 7 problem

    Hi,

    I just upgraded to Fedora 7 but encountered the problem below. Ran dmesg.
    Only some USB devices work. The belkin usb wireless does not work but usb memory work just fine.

    See the problem in red. Please help.

    Code:
    Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
    BIOS-provided physical RAM map:
    
    
    
    hub 5-0:1.0: 8 ports detected
    usb 1-1: device descriptor read/all, error -71
    SCSI subsystem initialized
    l
    input: Logitech Optical USB Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2
    usb 4-2: new low speed USB device using uhci_hcd and address 2
    usb 4-2: configuration #1 chosen from 1 choice
    input: CHICONY USB Keyboard as /class/input/input2
    input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.3-2
    input: CHICONY USB Keyboard as /class/input/input3
    input,hiddev96: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:1d.3-2
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
    security:  60 classes, 65638 rules
    SELinux:  Completing initialization.
    SELinux:  Setting up existing superblocks.
    SELinux: initialized (dev dm-0, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    audit(1181607331.746:2): policy loaded auid=4294967295
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    input: PC Speaker as /class/input/input4
    iTCO_vendor_support: vendor-support=0
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
    iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    intel_rng: FWH not detected
    8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
    eth0: RealTek RTL8139 at 0xf8972000, 00:0f:ea:ae:8a:ca, IRQ 20
    eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com.
    Loading module: rt2x00usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
    Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
    hda_codec: Cannot set up configuration from BIOS.  Using 3-stack mode...
    usbcore: registered new interface driver rt73usb
    Loading module: rt2500usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
    usbcore: registered new interface driver rt2500usb
    rt2x00lib->rt2x00lib_load_firmware_continued: Error - Failed to read Firmware.
    audit(1181578539.506:3): avc:  denied  { search } for  pid=1100 comm="salsa" name="root" dev=dm-0 ino=2319713 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
    audit(1181578539.506:4): avc:  denied  { search } for  pid=1101 comm="salsa" name="root" dev=dm-0 ino=2319713 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
    loop: loaded (max 8 devices)
    FDC 0 is a post-1991 82077
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    sonypi: Sony Programmable I/O Controller Driver v1.26.
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.25.0 20060524 on minor 0
    audit(1181578547.005:5): avc:  denied  { search } for  pid=1158 comm="rhgb" name="root" dev=dm-0 ino=2319713 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
    No dock devices found.
    input: Power Button (FF) as /class/input/input5
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input6
    ACPI: Power Button (CM) [PWRB]
    ibm_acpi: ec object not found
    EXT3 FS on dm-0, internal journal
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
    SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
    Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    audit(1181578554.504:6): audit_pid=1594 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    eth0: link down
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] writeback test succeeded in 1 usecs
    usb 5-3: new high speed USB device using ehci_hcd and address 6
    usb 5-3: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver prism54usb
    rt2x00lib->rt2x00lib_load_firmware_continued: Error - Failed to read Firmware.
    usb 5-3: USB disconnect, address 6
    usb 5-3: new high speed USB device using ehci_hcd and address 7
    usb 5-3: configuration #1 chosen from 1 choice
    usb 5-3: USB disconnect, address 7
    Initializing USB Mass Storage driver...
    usb 5-3: new high speed USB device using ehci_hcd and address 8
    usb 5-3: device descriptor read/64, error -71
    usb 5-3: device descriptor read/64, error -71
    usb 5-3: new high speed USB device using ehci_hcd and address 9
    usb 5-3: device descriptor read/64, error -71
    usb 5-3: device descriptor read/64, error -71
    usb 5-3: new high speed USB device using ehci_hcd and address 10
    usb 5-3: device not accepting address 10, error -71
    usb 5-3: new high speed USB device using ehci_hcd and address 11
    usb 5-3: device not accepting address 11, error -71
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device scan complete
    scsi 2:0:0:0: Direct-Access     IC       USB Storage-CFC  322E PQ: 0 ANSI: 0 CCS
    scsi 2:0:0:1: Direct-Access     IC       USB Storage-SMC  322E PQ: 0 ANSI: 0 CCS
    scsi 2:0:0:2: Direct-Access     IC       USB Storage-MMC  322E PQ: 0 ANSI: 0 CCS
    scsi 2:0:0:3: Direct-Access     IC       USB Storage-MSC  322E PQ: 0 ANSI: 0 CCS
    sd 2:0:0:0: Attached scsi removable disk sdb
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    sd 2:0:0:1: Attached scsi removable disk sdc
    sd 2:0:0:1: Attached scsi generic sg3 type 0
    sd 2:0:0:2: Attached scsi removable disk sdd
    sd 2:0:0:2: Attached scsi generic sg4 type 0
    sd 2:0:0:3: Attached scsi removable disk sde
    sd 2:0:0:3: Attached scsi generic sg5 type 0

    Thanks

  2. #2
    ramasees Guest
    hi when you say upgraded how did you do it was it a fresh install

  3. #3
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    289
    It's not a fresh install. I upgraded from fedora core 6 to fedora 7

  4. #4
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    289
    I think this is a kernel bug. Can someone kindly confirm ?

  5. #5
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    289
    I downloaded the latest vanilla kernel and compiled myself. This problem is fixed. I guess we should wait for the kernel update from fedora

Similar Threads

  1. Fedora 10 problem upgrade from Fedora Core 5
    By 1948chev in forum Installation, Upgrades and Live Media
    Replies: 2
    Last Post: 23rd January 2009, 08:34 PM
  2. upgrade via yum frmo fedora core 2 to fedora core 3
    By ccole in forum Installation, Upgrades and Live Media
    Replies: 1
    Last Post: 4th May 2005, 05:21 AM
  3. VNC Problem on Fedora Core 3 Upgrade
    By sc00by in forum Using Fedora
    Replies: 4
    Last Post: 26th March 2005, 10:19 AM
  4. Fedora Core 2 Upgrade - Desktop Icons Problem
    By jladd in forum Installation, Upgrades and Live Media
    Replies: 7
    Last Post: 21st June 2004, 04:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •