FedoraForum.org - Fedora Support Forums and Community

View Poll Results: Did it work for you

Voters
945. You may not vote on this poll
  • Yes

    459 48.57%
  • No

    343 36.30%
  • Nearly worked

    143 15.13%
Page 11 of 326 FirstFirst ... 9 10 11 12 13 21 61 111 ... LastLast
Results 151 to 165 of 4882
  1. #151
    Join Date
    Jun 2007
    Location
    U.K
    Age
    43
    Posts
    74

    Confusion...

    Hi,

    I am nearly to install FC6 in a lapto with a 32-bit architecture (intel core, dual, etc processor) I do not have any experience of installing OS...

    So, will I have the problem about the wrong kernel?

    Does "When the booting the CD (or DVD) enter the following at the boot prompt: linux i686" (http://www.mjmwired.net/resources/mj....html#problems) mean that in some moment of the installation the option will appear, and then I have to type "linux i686"?

    Regards.

    DanMachado

  2. #152
    ramasees Guest
    i think if i remember correctly press f2 then type linux i686 then enter

  3. #153
    Join Date
    Jun 2007
    Location
    U.K
    Age
    43
    Posts
    74
    Well well I hope that you have a good memory!

    Cheers!

  4. #154
    leigh123linux Guest
    Quote Originally Posted by DanMachado
    Well well I hope that you have a good memory!

    Cheers!
    Well his memory is good

  5. #155
    ramasees Guest
    thanks leigh and thats after a beer,have you had any flooding there pretty wet here in mids

  6. #156
    leigh123linux Guest
    Quote Originally Posted by ramasees
    thanks leigh and thats after a beer,have you had any flooding there pretty wet here in mids
    It's been dry here today but will had quite a bad storm at the weekend but no flooding.

  7. #157
    Join Date
    Jun 2007
    Posts
    22
    Hi, but have any kmod-fglrx working with kernel x86_64 3228 ?
    I have install ati-driver from freshrpm, when it finished, reboot computer and I can not start X, error occur, It auto change xorg.conf back as fresh xorg.conf.

  8. #158
    leigh123linux Guest
    Quote Originally Posted by swa_1101
    Hi, but have any kmod-fglrx working with kernel x86_64 3228 ?
    I have install ati-driver from freshrpm, when it finished, reboot computer and I can not start X, error occur, It auto change xorg.conf back as fresh xorg.conf.
    I will try and compile some for the new kernel and post them on post #2

    I didn't need to compile any , I managed to find some for you

    http://mirror.atrpms.net/livna/fedora/testing/7/x86_64/
    Last edited by leigh123linux; 22nd June 2007 at 05:07 PM.

  9. #159
    leigh123linux Guest
    Quote Originally Posted by swa_1101
    Hi, but have any kmod-fglrx working with kernel x86_64 3228 ?
    I have install ati-driver from freshrpm, when it finished, reboot computer and I can not start X, error occur, It auto change xorg.conf back as fresh xorg.conf.
    Here you go ( I found some )

    http://mirror.atrpms.net/livna/fedora/testing/7/x86_64/


    Code:
    su
    mkdir /home/*/livna
    cd /home/*/livna
    wget http://mirror.atrpms.net/livna/fedora/testing/7/x86_64/kmod-fglrx-8.37.6-2.2.6.21_1.3228.fc7.x86_64.rpm
    wget http://mirror.atrpms.net/livna/fedora/testing/7/x86_64/xorg-x11-drv-fglrx-8.37.6-1.lvn7.x86_64.rpm
    wget http://mirror.atrpms.net/livna/fedora/testing/7/x86_64/xorg-x11-drv-fglrx-libs-32bit-8.37.6-1.lvn7.x86_64.rpm
    wget http://mirror.atrpms.net/livna/fedora/7/x86_64/livna-config-display-0.0.12-1.lvn7.noarch.rpm
    rpm -i *
    service fglrx restart
    fglrx-config-display enable
    Last edited by leigh123linux; 22nd June 2007 at 05:21 PM.

  10. #160
    Join Date
    Jun 2007
    Posts
    22
    Code:
    [root@localhost SWA]# service fglrx restart
    bash: service: command not found
    I could not continue!

    When I restart computer it is not start X, same as my last post!

  11. #161
    leigh123linux Guest
    Quote Originally Posted by swa_1101
    Code:
    [root@localhost SWA]# service fglrx restart
    bash: service: command not found
    I could not continue!

    When I restart computer it is not start X, same as my last post!
    sorry you need to be full root

    su -
    service fglrx restart
    fglrx-config-display enable

    1. Did you edit your xorg.conf as described in section 3 ? of post #1
    2. Did you remember to downgrade xorg . ?

    if the above steps fail post the output from

    cat /var/log/Xorg.0.log | grep EE


    and


    cat /var/log/Xorg.0.log | grep WW
    Last edited by leigh123linux; 22nd June 2007 at 06:23 PM.

  12. #162
    Join Date
    Jun 2007
    Posts
    22

    Wink

    All is Done but It is same!

    Code:
    [root@localhost SWA]# cat /var/log/Xorg.0.log | grep EE
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (II) Loading extension MIT-SCREEN-SAVER
    (EE) AIGLX: Screen 0 is not DRI capable
    [root@localhost SWA]# cat /var/log/Xorg.0.log | grep WW
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (WW) No monitor specified for screen "Screen0".
    (WW) No FontPath specified.  Using compiled-in default.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (WW) RADEON(0): Unknown DDCType 5 found
    (WW) RADEON(0): LCD DDC Info Table found!
    (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
    (WW) RADEON(0): Direct rendering disabled
    (WW) <default pointer>: No Device specified, looking for one...

  13. #163
    Join Date
    Jun 2007
    Posts
    22
    Here is my xorg.conf before I reboot computer

    Code:
    # Xorg configuration created by system-config-display
    
    Section "ServerLayout"
    	Identifier     "single head configuration"
    	Screen      0  "Screen0" 0 0
    	InputDevice    "Keyboard0" "CoreKeyboard"
    	InputDevice    "Synaptics" "CorePointer"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Keyboard0"
    	Driver      "kbd"
    	Option	    "XkbModel" "pc105"
    	Option	    "XkbLayout" "us"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Synaptics"
    	Driver      "synaptics"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Protocol" "auto-dev"
    	Option	    "Emulate3Buttons" "yes"
    EndSection
    
    Section "Device"
    	Identifier  "Videocard0"
    	Driver      "fglrx"
    EndSection
    
    Section "Screen"
    	Identifier "Screen0"
    	Device     "Videocard0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    
    Section "Extensions"
    Option "Composite" "False"
    EndSection
    
    
    Section "ServerFlags"
    Option "AIGLX" "off"
    EndSection
    
    Section "DRI"
    Mode 0666
    EndSection

  14. #164
    leigh123linux Guest
    Quote Originally Posted by swa_1101
    Here is my xorg.conf before I reboot computer

    Code:
    # Xorg configuration created by system-config-display
    
    Section "ServerLayout"
    	Identifier     "single head configuration"
    	Screen      0  "Screen0" 0 0
    	InputDevice    "Keyboard0" "CoreKeyboard"
    	InputDevice    "Synaptics" "CorePointer"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Keyboard0"
    	Driver      "kbd"
    	Option	    "XkbModel" "pc105"
    	Option	    "XkbLayout" "us"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Synaptics"
    	Driver      "synaptics"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Protocol" "auto-dev"
    	Option	    "Emulate3Buttons" "yes"
    EndSection
    
    Section "Device"
    	Identifier  "Videocard0"
    	Driver      "fglrx"
    EndSection
    
    Section "Screen"
    	Identifier "Screen0"
    	Device     "Videocard0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    
    Section "Extensions"
    Option "Composite" "False"
    EndSection
    
    
    Section "ServerFlags"
    Option "AIGLX" "off"
    EndSection
    
    Section "DRI"
    Mode 0666
    EndSection

    Ok try this xorg.conf

    # Xorg configuration created by system-config-display

    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Synaptics" "CorePointer"
    EndSection

    Section "ServerFlags"
    Option "AIGLX" "off"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection

    Section "InputDevice"
    Identifier "Synaptics"
    Driver "synaptics"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "auto-dev"
    Option "Emulate3Buttons" "yes"
    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    VendorName "auto"
    ModelName "auto"
    Option "DPMS"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection

    Section "Extensions"
    Option "Composite" "False"
    EndSection

    This should say fglrx not radeon

    WW) RADEON(0): Unknown DDCType 5 found
    (WW) RADEON(0): LCD DDC Info Table found!
    (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
    (WW) RADEON(0): Direct rendering disabled

  15. #165
    Join Date
    Jun 2007
    Posts
    22
    Hi, I have try to replace your xorg.conf but it is also failed!

    I have a question: I can not do this because I have a new version 1.2.0-9 that can not remove

    rpm -U --oldpackage xorg-x11-server-Xorg-1.2.0-6.fc7.x86_64.rpm

    So if I do not try it, have any wrong about can not start X?

Page 11 of 326 FirstFirst ... 9 10 11 12 13 21 61 111 ... LastLast

Similar Threads

  1. ATI Catalyst fglrx driver manual install on Fedora 12
    By Jeff72 in forum Guides & Solutions (Not For Questions)
    Replies: 15
    Last Post: 13th August 2010, 09:17 PM
  2. ATI Catalyst™ Display Driver v9.12
    By rich52 in forum Hardware & Laptops
    Replies: 1
    Last Post: 31st December 2009, 05:59 AM
  3. HOWTO - make less noise from video card while using fglrx driver
    By multescugeorge@ in forum Guides & Solutions (Not For Questions)
    Replies: 2
    Last Post: 3rd October 2009, 08:02 AM
  4. ATI Catalyst 9.x fglrx driver manual install on Fedora 11
    By Jeff72 in forum Guides & Solutions (Not For Questions)
    Replies: 25
    Last Post: 30th August 2009, 08:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •