PDA

View Full Version : Problem with Dual-screen.



pcboy
29th June 2005, 10:42 PM
Hi !
I have a little problem.
I have setup Fedora on my system for the second time.
The first time my Dual screen was fully functionnal.

But now, when i choose my second monitor, and i would click on apply, nothing happens !

I click on apply much times, but it is look like a bug :rolleyes:

So i know i can do that with xorg.conf, but i would like a model, because on the internet, everybody makes a xorg.conf with 2 video-Cards, but, i have only one.

Someone with dual-screen and 1 video-card could me paste his xorg.conf file ?

Thanx, sorry for my bad english, i'm a poor french guy :D

CrystalCowboy
29th June 2005, 11:09 PM
Please provide more information, such as:

Which version of Fedora, and what kernel?

What graphics card do you have?

Which driver are you using for it?

pcboy
30th June 2005, 12:56 AM
Ho yeah sorry ;)

I have a Ati radeon 9200 PRO, with 1 VGA output and one DVI output, i use the drivers included in Fedora.

My kernel is 2.6.9-1.667

Fedora 3

skoona
1st July 2005, 06:41 AM
filename: /etc/X11/xorg.conf
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Gateway EV700"
HorizSync 31.0 - 69.0
VertRefresh 50.0 - 110.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Gateway EV700"
HorizSync 31.0 - 69.0
VertRefresh 50.0 - 110.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "fglrx" #-- change to 'radeon' to use FC3/4 driver
VendorName "Videocard vendor"
BoardName "ATI Radeon 9600SE Port 1"
Option "mtrr" "off"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "no_accel" "no"
Option "no_dri" "no"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:5:0" # vendor=1002, device=4151
Screen 0
Option "Capabilities" "0x00000000"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "no_accel" "no"
Option "no_dri" "no"
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
## Option "MonitorLayout" "AUTO, STV"
Option "IgnoreEDID" "off"
Option "HSync2" "31.0 - 69.0"
Option "VRefresh2" "50.0 - 110.0"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"

# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9600SE Port 1"
Option "mtrr" "off"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "no_accel" "no"
Option "no_dri" "no"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:5:0"
Screen 1
Option "Capabilities" "0x00000000"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "no_accel" "no"
Option "no_dri" "no"
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
## Option "MonitorLayout" "AUTO, STV"
Option "IgnoreEDID" "off"
Option "HSync2" "31.0 - 69.0"
Option "VRefresh2" "50.0 - 110.0"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"

# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Hope this helps you.