PDA

View Full Version : Averatec 6240EH-01 PCMCIA Problem



cdcarson
23rd June 2005, 07:05 AM
:confused:

Hey Everyone,

I have installed Fedoa Core 3 x86 and Fedora Core x86_64 with the same results on this laptop. I am currently running FC4 x86_64 2.6.11-1.1369_FC4.

I am receiving the following error messages on startup:

Yenta: CardBus bridge found at 0000:00:0a.0 [1462:0111]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x00001002, devctl 0x44
Yenta TI: socket 0000:00:0a.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:00:0a.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: 00000720
cs: pcmcia_socket0: unable to apply power.
cs: pcmcia_socket0: unable to apply power.
cs: pcmcia_socket0: unable to apply power.

This laptop is equiped with a ENE CB1410 PCMCIA Controller.
00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)

I have tried several things without success. Does anyone have any ideas? By googling I have found the following issues that are very similar.

http://lists.infradead.org/pipermail/linux-pcmcia/2004-March/000622.html
http://www.emmanuelebassi.net/documentation/ubuntu-e6300

I believe I may not know what memory range I need to reserve.. Can somone look at my /proc/iomem and see if they can figure it out. I also suspect it might be conflicting with my Video Card(SIS M760). It uses shared memory with my RAM. Thanks!


Contents of "lspci":
------------------------------------------
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
00:0e.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP VGA Display Adapter



Contents of "/proc/iomem":
------------------------------------------
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-1dfcffff : System RAM
00100000-003c46c2 : Kernel code
003c46c3-00501b67 : Kernel data
1dfd0000-1dfdefff : ACPI Tables
1dfdf000-1dffffff : ACPI Non-volatile Storage
1e000000-1e000fff : 0000:00:0a.0
1e000000-1e000fff : yenta_socket
1e400000-1e7fffff : PCI CardBus #02
1e800000-1ebfffff : PCI CardBus #02
cfd00000-dfcfffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
dfe00000-dfefffff : PCI Bus #01
dfee0000-dfefffff : 0000:01:00.0
dfffa000-dfffbfff : 0000:00:0e.0
dfffa000-dfffbfff : 0000:00:0e.0
dfffc000-dfffcfff : 0000:00:04.0
dfffc000-dfffcfff : sis900
dfffd000-dfffdfff : 0000:00:03.0
dfffd000-dfffdfff : ohci_hcd
dfffe000-dfffefff : 0000:00:03.1
dfffe000-dfffefff : ohci_hcd
dffff000-dfffffff : 0000:00:03.3
dffff000-dfffffff : ehci_hcd
e0000000-e3ffffff : 0000:00:00.0
ff780000-ffffffff : reserved

contents of "/proc/ioports":
------------------------------------------
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0800-0803 : PM1a_EVT_BLK
0804-0805 : PM1a_CNT_BLK
0808-080b : PM_TMR
0810-0815 : ACPI CPU throttle
0816-0816 : PM2_CNT_BLK
0820-0823 : GPE0_BLK
0830-0833 : GPE1_BLK
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
c000-cfff : PCI Bus #01
cc00-cc7f : 0000:01:00.0
d800-d8ff : 0000:00:04.0
d800-d8ff : sis900
e000-e07f : 0000:00:02.6
e000-e07f : SiS SI7013 Modem
e400-e4ff : 0000:00:02.6
e400-e4ff : SiS SI7013 Modem
e800-e8ff : 0000:00:02.7
e800-e8ff : SiS SI7012
ec00-ec7f : 0000:00:02.7
ec00-ec7f : SiS SI7012
ffa0-ffaf : 0000:00:02.5
ffa0-ffa7 : ide0
ffa8-ffaf : ide1

contents of "/proc/ioports":
------------------------------------------
CPU0
0: 2621857 IO-APIC-edge timer
1: 7086 IO-APIC-edge i8042
8: 0 IO-APIC-edge rtc
9: 347 IO-APIC-level acpi
12: 326 IO-APIC-edge i8042
14: 11178 IO-APIC-edge ide0
15: 5388 IO-APIC-edge ide1
169: 0 IO-APIC-level SiS SI7012, SiS SI7013 Modem
177: 5991 IO-APIC-level eth0
185: 2 IO-APIC-level ehci_hcd:usb1
193: 29584 IO-APIC-level ohci_hcd:usb2
201: 0 IO-APIC-level ohci_hcd:usb3
NMI: 336
LOC: 2621508
ERR: 0
MIS: 0

cdcarson
23rd June 2005, 07:08 AM
Contents of "dmesg":
------------------------------------------
Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
Linux version 2.6.11-1.1369_FC4 (bhcompile@dolly.build.redhat.com) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 Thu Jun 2 22:56:33 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001dfd0000 (usable)
BIOS-e820: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
BIOS-e820: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 MSI ) @ 0x00000000000f7250
ACPI: RSDT (v001 MSI 1011 0x11022004 MSFT 0x00000097) @ 0x000000001dfd0000
ACPI: FADT (v002 MSI 1011 0x11022004 MSFT 0x00000097) @ 0x000000001dfd0200
ACPI: MADT (v001 MSI OEMAPIC 0x11022004 MSFT 0x00000097) @ 0x000000001dfd0390
ACPI: OEMB (v001 MSI AMI_OEM 0x11022004 MSFT 0x00000097) @ 0x000000001dfdf040
ACPI: DSDT (v001 MSI 1011 0x11022004 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 122832
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118736 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1780000)
Checking aperture...
CPU 0: aperture @ e0000000 size 64 MB
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2000.109 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 477056k/491328k available (2833k kernel code, 13596k reserved, 1269k data, 196k init)
Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 00
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
softlockup thread 0 started up.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC] (gpe 26)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1119475140.248:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E7026A3FC5566DE5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Thermal Zone [THRM] (64 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 169
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype DVDRW SOSW-852S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 28Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 917504 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.2)
powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x4 (1450 mV)
cpu_init done, current fid 0xc, vid 0x4
ACPI wakeup devices:
AC97 MC97 CBC0 MAC
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio1
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
floppy0: no floppy controllers found
sis900.c: v1.08.08 Jan. 22 2005
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 177
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 177, 00:0c:76:f7:74:83.
rt2500: Unknown parameter `'
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 169

cdcarson
23rd June 2005, 07:08 AM
rt2500 1.1.0 BETA2 2005/02/21 http://rt2x00.serialmonkey.com
snd_intel8x0: Unknown parameter `'
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 169
intel8x0_measure_ac97_clock: measured 49460 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 169
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 185
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 185, io mem 0xdffff000
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 193, io mem 0xdfffd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 201
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 201, io mem 0xdfffe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 209
Yenta: CardBus bridge found at 0000:00:0a.0 [1462:0111]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x00001002, devctl 0x44
usb 2-2: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.0-2
Yenta TI: socket 0000:00:0a.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:00:0a.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: 00000720
cs: pcmcia_socket0: unable to apply power.

NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff804ba620(lo)
IPv6 over IPv4 tunneling driver
cs: pcmcia_socket0: unable to apply power.
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cs: pcmcia_socket0: time out after reset.
PCMCIA: socket ffff81001cfe2880: *** DANGER *** unable to remove socket power
EXT3 FS on hda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1919 buckets, 15352 max) - 384 bytes per conntrack
cs: pcmcia_socket0: time out after reset.
PCMCIA: socket ffff81001cfe2880: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: time out after reset.

------------------------

Thanks for any assistance!
cdcarson :)

cdcarson
26th June 2005, 09:05 PM
Hey Everyone!
I got my Averatec 6240 PCMCIA slot working! I also posted this issue into another forum. A guy responded and was able to assist me. Here is the link.

http://www.averatecforums.com/showthread.php?p=13789#post13789
http://averatecforums.com/showthread.php?t=2014

I will include a copy of my /etc/grub.conf with the new "reserve=" line added in to the kernel. Once I rebooted my laptop my PCMCIA started right up without any issues. I then was able to plugin my PCMCIA TV/Capture card!

The reserve line in the kernel boot line is neccessary because PCMCIA was conflicting with the shared memory video card. This is because the laptop has a "SIS M760 VGA". This is also a problem with the Averatec 3270 laptops.

I also think that the "reserve=" will change as you increase your shared video memory in your bios.

Thanks again!

---------------------------------------------------------------------------------
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,1)
# kernel /vmlinuz-version ro root=/dev/hda3
# initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=5
splashimage=(hd0,1)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.11-1.1369_FC4)
root (hd0,1)
kernel /vmlinuz-2.6.11-1.1369_FC4 noapic ro root=LABEL=/ rhgb quiet reserve=0x1e000000,0x20000000
initrd /initrd-2.6.11-1.1369_FC4.img
title WinXP
rootnoverify (hd0,0)
chainloader +1