PDA

View Full Version : No Networking devices fedora 19



vikeyev
12th January 2014, 12:41 AM
Recently I used clonezilla to clone an image of harvards cs50 appliance (fedora) and install it directly onto my laptop. I was expecting a few hardware and driver issues but the only thing I have encountered is the os doesn't seem to detect my NIC.

lspci | grep -i eth0 gives me no output. Also under my menus, I don't appear to have any entries about internet. I have network connections but that's about it.
What could I possibly do to reedy this? All of my attempts so far have been futile.

vikeyev
12th January 2014, 12:56 AM
(~): /sbin/lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV630 HDMI Audio [Radeon HD 2600 Series]
05:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

Super Jamie
12th January 2014, 01:05 PM
Your wireless card is detected:

05:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
How does the appliance control the network? Does it have NetworkManager? Does NM see the wireless connection? Is there anything in /etc/sysconfig/network-scripts/ifcfg-*?

You might find it easier to run a full Fedora install on your laptop, and use the Appliance as a VM, either with VMWare Player or you might be able to convert it to KVM with virt-convert.

The build method for the Appliance is available - http://mirror.cs50.net/appliance50/19/source/latest/ - which would let you kickstart your own virtual machine from the network install tree.