PDA

View Full Version : enemy-territory on FC3-x86_64 installation!



cybrjackle
24th November 2004, 08:21 PM
EDIT: linux32 sh et-linux-2.56-2.x86.run

Well crap, why didn't any were I've read about x86_64 suggest you can use "linux32"???????????

Ignore this whole thread, just use linux32 in front of it :wall:

:eek:



Ok, if your like me and have an addiction to et but got your self a shinny 64bit proc and os and hate the fact that you would have to intall a 32bit os to feed your addiction, then sit back and read.

First, the internet sucks for searching et and x86_64 :mad:

The only thing I got out of it was this durning install:



# sh et-linux-2.56-2.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.56.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..........
This installation doesn't support glibc-2.1 on Linux / x86_64
(tried to run setup)
See http://zerowing.idsoftware.com/linux/ for troubleshooting
The setup program seems to have failed on x86_64/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting


If you follow that, the best info you get is this:



Setup and execution on 64 bits CPUs

If you are running Linux on a 64 bit CPU (such as AMD's Opteron), and if your system is backwards compatible so that it can execute 32 bits x86 binaries, then the regular Quake III Arena binaries should work (your mileage may vary).

It's likely that the installer scripts will get confused though, and will refuse to install giving you an error: "This installation doesn't support glibc-2.1 on Linux / unknown". You will have to extract the game files manually by passing --keep on the command line when running the setup script. Once the files are unpacked, you will need to copy them manually to /usr/local/games. You probably want to have a working installation to refer to while doing this. This also applies to RTCW and ET

Ok, so we pass --keep, joy thinks for the help. Atleast its a starting place.
:rolleyes:


Alright, enough blah blah lets get to the part about being able to play, shall we? (keep in mind, internet searches turned up nothing for me but the above and YMMV if you follow what i figured out and it doesn't work) ;-)

1.)


# sh et-linux-2.56-2.x86.run --keep

2.)


# ls
etlinux2256update.x86.run et-linux-2.56-2.x86.run setup.4662
et-linux-2.55.x86.run Maps WolfET.exe

3.)


# setup.4662/setup.data/bin/Linux/x86/setup


Thats right, the rest looks familiar!

Make sure your nvidia_64 drivers are installed.

Logout/logon, whatever you need to do and fire up



$ et


ENJOY!

If you run into NO SOUND like I did, run



echo "et.x86 0 0 direct" >/proc/asound/card0/pcm0p/oss


If you already figured this out, congrats, & shame on you for not posting and wasteing an hour of my time. :p

Thats all, i'm off to feed my addiction!

/me thinks that now he has et and mp3 play back in his 64bit OS he is now happy finaly.........

Jman
25th November 2004, 07:49 AM
Nice.

Copied to AMD 64 instead of double post.

drews_blunted
29th November 2004, 05:54 AM
# setup.4662/setup.data/bin/Linux/x86/setup
Couldn't load 'setup.data/setup.xml'

i get that erro when i follow your directions?? anyone know what this might be!

cybrjackle
29th November 2004, 06:14 AM
Did you see my edit at the top?

Just run this:



linux32 sh et-linux-2.56-2.x86.run

neph04
26th February 2005, 11:33 PM
i have trouble with this:



I tried two downloads from diferent server...and both give me same result...

I did:
linux32 et....

please do i something wrong? :confused:



[root@localhost games]# sh et-linux-2.56-2.x86.run --keep
Creating directory setup.4662 Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.56.............................................. .................................................. .......
.................................................. .................................................. .................................................. ....................
.................................................. .................................................. .................................................. ....................
.................................................. .................................................. .................................................. ....................
Extraction failed. Terminated

neph04
26th February 2005, 11:37 PM
it seems that pack is OK

i tried to install it and all unpacked good :confused:



where is problem??


[root@localhost games]# sh et-linux-2.56-2.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.56.............................................. .................................................. ........
.................................................. .................................................. .................................................. ....................
................................
This installation doesn't support glibc-2.1 on Linux / x86_64 (tried to run setup)
See http://zerowing.idsoftware.com/linux/ for troubleshooting
The setup program seems to have failed on x86_64/glibc-2.1
See http://zerowing.idsoftware.com/linux/ for troubleshooting

cybrjackle
27th February 2005, 12:44 AM
did you try it with the command I posted up there ?



linux32 sh et-linux-2.56-2.x86.run


Your missing the linux32 command in front.

<(X)_HD_(X)>
27th February 2005, 04:57 AM
Quit.........

neph04
27th February 2005, 10:58 AM
Im BIG BAD NOOB, LAMER and SORRY for it! :(

my mistake...
I did:
[root@localhost games]# linux32 et-linux-2.56-2.x86.run
but I should:
[root@localhost games]# linux32 sh et-linux-2.56-2.x86.run

cybrjackle
27th February 2005, 05:39 PM
Thats cool, so it worked for you?

neph04
1st March 2005, 04:31 PM
Yeah.. .really helped :)

reqage
15th March 2005, 11:52 PM
I've done what has been posted in the forum but after install, when I try to run et, I get this...

...WARNING: could not set the given mode (4)
Initializing OpenGL display
...setting mode 3: 640 480
Using XFree86-VidModeExtension Version 2.2
XF86DGA Mouse (Version 2.0) initialized
XFree86-VidModeExtension Activated at 640x480
Received signal 11, exiting...
[root@localhost et]# Mutex destroy failure: Device or resource busy
ICE default IO error handler doing an exit(), pid = 8173, errno = 0


Please help. I dunno if it is opengl problem or what.

t3gah
17th March 2005, 11:11 PM
Usually in the situation like what my brother is experiencing with Linux and 64bit rpm no shows is he is going to wait until one distro supports 64bit all the way including the rpm repository.

I'll tell him about the howto here but he's old school like me and we are used to creative thinking to get around inherent problems that other people create with their lack of vision when they release their product for plain jane users in the world to complain about.

Someone should just have a howto or an automated online script that will turn any 32bit rpm into a 64bit rpm. That will fix everything. As for the OS I bet there's a 64bit Open Source web site that has it all ....

cybrjackle
18th March 2005, 12:54 AM
Usually in the situation like what my brother is experiencing with Linux and 64bit rpm no shows is he is going to wait until one distro supports 64bit all the way including the rpm repository.

I'll tell him about the howto here but he's old school like me and we are used to creative thinking to get around inherent problems that other people create with their lack of vision when they release their product for plain jane users in the world to complain about.

Someone should just have a howto or an automated online script that will turn any 32bit rpm into a 64bit rpm. That will fix everything. As for the OS I bet there's a 64bit Open Source web site that has it all ....

I'm not real sure what you are talking about, but Fedora Core 2/3 is a full 64bit OS and software, however, they can't conrol what a closed source game developer does. ;)

blueflowers
4th August 2005, 12:21 AM
I am trying to do something similiar. I am addicted to rtcw, and I am trying to install it. Its not working though... I have all the files copied, and i ran a linux update.run file in terminal. But how do I start the game?

cybrjackle
4th August 2005, 12:46 AM
I am trying to do something similiar. I am addicted to rtcw, and I am trying to install it. Its not working though... I have all the files copied, and i ran a linux update.run file in terminal. But how do I start the game?

Depends on were you told it to install, default would be



/usr/local/games/rtcw


The startup file would be in there, I don't have it installed atm, but i would say it is something like rtwc or mp, do an

ls -l on the dir you installed it and post that back here.

blueflowers
4th August 2005, 01:06 AM
"...WARNING: could not set the given mode (3)
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Sys_Error: GLimp_Init() - could not load OpenGL subsystem
"

I am getting this. What does this mean and how do I fix it?

cybrjackle
4th August 2005, 02:11 AM
open a terminal and run



$ glxgears


Do you have a nvidia or ati card? Did you install the closed source drivers?

blueflowers
4th August 2005, 01:52 PM
I updated my driver, and then reinstalled. All works!

blueflowers
5th August 2005, 02:58 PM
Ok, I ran into problems. I had to reinstall my os. Got it up and running. Updated drivers, and installed wolf. Now I am getting that same error. I ran that tool. ITs still going, I dont know if it stops on its own or not but heres what I hve so far.

Its an ati x800

Xlib: extension "XFree86-DRI" missing on display ":0.0".
747 frames in 5.0 seconds = 149.400 FPS
720 frames in 5.0 seconds = 144.000 FPS
960 frames in 5.0 seconds = 192.000 FPS
5280 frames in 5.0 seconds = 1056.000 FPS
5520 frames in 5.0 seconds = 1104.000 FPS
4560 frames in 5.0 seconds = 912.000 FPS
5520 frames in 5.0 seconds = 1104.000 FPS
5640 frames in 5.0 seconds = 1128.000 FPS
5506 frames in 5.0 seconds = 1101.200 FPS
5520 frames in 5.0 seconds = 1104.000 FPS
5520 frames in 5.0 seconds = 1104.000 FPS
2760 frames in 5.0 seconds = 552.000 FPS
840 frames in 5.0 seconds = 168.000 FPS
720 frames in 5.0 seconds = 144.000 FPS
840 frames in 5.0 seconds = 168.000 FPS
720 frames in 5.0 seconds = 144.000 FPS
840 frames in 5.0 seconds = 168.000 FPS

blueflowers
5th August 2005, 05:41 PM
Ok, I dont know how to uninstall Vid drivers I have loaded... So I reinstalled Linux again. I have a fresh install. I am using an ati x800pro Video card. My Fedora is 64 bit version, and my cpu is amd 64. Can someone tell me which driver I need, so that I get the right one? I would appreciate it very much.

blueflowers
5th August 2005, 07:41 PM
Okay... I installed the latest driver. When the system boots, And it goes through all the checks and puts things as either Failed in red or passed in green (I think it says passed) anyways... It is saying failed in red for ati fglrx kernel module. I think this might be my problem. But... what is the fix? I am looking and looking and Can not find any answers.

blueflowers
5th August 2005, 10:11 PM
Ok, I started installing drivers like crazy. None worked, I gave up and turne dthe system off. When I booted it back up, things worked.

cybrjackle
13th August 2005, 05:57 AM
Glad you figured it out. Or, rebooted :)

Twey
13th August 2005, 09:15 AM
Rofl. Brilliant! I'm going to laugh about this for ages. :p

blueflowers
13th August 2005, 02:55 PM
I had rebooted in the first place, with no luck.

[GC]Neo
26th September 2006, 11:00 PM
sorry for bringing up a dead topic...

first off, i will explain the situation...

i work for a new site called Gaming-Centre. Now for this we bought a dedicated server.
i installed Fedora 4 for 64bit...
its what we have.

now, when i come along to install the game.. i get the same error you all did.
all i want is to host a server >_<

ok, here is the process taken.



[root@Gaming-Centre ET]# sh et-linux-2.55.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
This installation doesn't support glibc-2.1 on Linux / x86_64
(tried to run setup)
See http://zerowing.idsoftware.com/linux/ for troubleshooting
The setup program seems to have failed on x86_64/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting


[root@Gaming-Centre ET]# linux32 sh et-linux-2.55.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
/root/.setup9128: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory
./setup.sh: line 143: 9153 Aborted "$setup" "$@" 2>>$NULL
The setup program seems to have failed on x86/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting



i tried the --keep and got


Couldn't load 'setup.data/setup.xml'

any help?

cybrjackle
27th September 2006, 03:17 AM
Try:


yum provides libgtk-1.2.so.0


If something pops up that isn't installed, install it and try again.

[GC]Neo
27th September 2006, 12:50 PM
same error...
Activisions fault for not thinking of technology.. lol

[GC]Neo
30th September 2006, 06:23 PM
see this is a reason i use windows on my PC...
compatability... >_<

Scoooooty
3rd October 2006, 10:24 AM
Hello.

I am also having similer problems as NEO has trying to set up a gameserver. Difference with me Is I am trying to install the 2.55 version.

Im getting the same error as everyone else at 1st



[root@lms025 mercury]# linux32 sh et-linux-2.55.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
./setup.sh: line 278: 5235 Segmentation fault "$setup" "$@" 2>>$NULL
The setup program seems to have failed on x86/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting

I tried
yum provides libgtk-1.2.so.0 And got this


[root@lms025 mercury]# yum provides libgtk-1.2.so.0
Gathering header information file(s) from server(s)
Server: CentOS-3 - Addons
Server: CentOS-3 - Base
Server: CentOS-3 - Extras
Server: CentOS-3 - Updates
Finding updated packages
Downloading needed headers
Looking in available packages for a providing package
No packages found
Looking in installed packages for a providing package
Installed package: gtk+.i386 1:1.2.10-31 matches with
/usr/lib/libgtk-1.2.so.0
Installed package: gtk+.i386 1:1.2.10-31 matches with
/usr/lib/libgtk-1.2.so.0.9.1
Installed package: gtk+.i386 1:1.2.10-31 matches with
libgtk-1.2.so.0
3 results returned

I then ran the command again but ran into the same problem again.


[root@lms025 mercury]# linux32 sh et-linux-2.55.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
./setup.sh: line 278: 5315 Segmentation fault "$setup" "$@" 2>>$NULL
The setup program seems to have failed on x86/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting

Im not sure what to do to fix it.. Any help would be very much appreciated

[GC]Neo
3rd October 2006, 03:28 PM
i to am trying to install 2.55

compatability sucks :(

Scoooooty
5th October 2006, 10:08 AM
Try this command. I think I have finaly worked out a way of doing it.

This is the command I got after like 2 hours of stuffing around.


"linux32 sh et-linux-2.55.x86.run --keep --target et-2.55" where et.2.55 is the folder name you are creating.

Once the files are unpacked, you will need to copy them manually to /usr/local/games. You probably want to have a working installation to refer to while doing this

K1u
17th April 2007, 04:39 PM
linux32 sh et-linux-2.55.x86.run --keep --target et-2.55
Creating directory et-2.55
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
It is recommended to install as the super user
Please enter the root password or hit enter to continue as is
Password:
/root/.setup5451: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory
/home/K1u/Desktop/et-2.55/setup.sh: line 143: 5474 Aborted "$setup" "$@" 2>>$NULL
The setup program seems to have failed on x86/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting

[GC]Neo
8th May 2007, 07:54 PM
same as above

exterior
1st May 2008, 04:15 PM
i'm getting a different error, this is weird.



[root@u15301996 ~]# linux32 sh et-linux-2.55.x86.run --keep --target et-2.55
Creating directory et-2.55
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. ........................Extraction failed.
Terminated

[GC]Neo
4th May 2008, 01:14 PM
what Fedora? and sys specs?

[GC]Neo
4th May 2008, 04:11 PM
thing is i got mine to work, but atm, I don't have a linux server.. i went over to the dark side :(, I'm trying to remember what I did to get it working

the_fury
5th April 2009, 02:59 PM
did you try it with the command I posted up there ?



linux32 sh et-linux-2.56-2.x86.run


Your missing the linux32 command in front.

Um.... still doesn't work for me... help please?



[root@Upstairs-Laptop Download]# linux32 sh et-linux-2.55.x86.run
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.55.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...
/root/.setup31160: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory
./setup.sh: line 143: 31184 Aborted "$setup" "$@" 2>> $NULL
The setup program seems to have failed on x86/glibc-2.1

See http://zerowing.idsoftware.com/linux/ for troubleshooting