PDA

View Full Version : system-config-lvm fails to start - FC5



boaojatista
18th May 2006, 11:01 PM
Hi folks,
I am back again. This is the output I get whe I try to run system-config-lvm, both form the command line or System Adm tray:


[root@CedarCourt ~]# system-config-lvm
Traceback (most recent call last):
File "/usr/sbin/system-config-lvm", line 138, in ?
runFullGUI()
File "/usr/sbin/system-config-lvm", line 123, in runFullGUI
blvm = baselvm(glade_xml, app)
File "/usr/sbin/system-config-lvm", line 68, in __init__
self.lvmm = lvm_model()
File "/usr/share/system-config-lvm/lvm_model.py", line 142, in __init__
self.__block_device_model = BlockDeviceModel()
File "/usr/share/system-config-lvm/BlockDeviceModel.py", line 19, in __init__
bd = BlockDevice(devname)
File "/usr/share/system-config-lvm/BlockDevice.py", line 41, in __init__
self.reload()
File "/usr/share/system-config-lvm/BlockDevice.py", line 62, in reload
self.addNoAlign(part.beg, part.end, part.id, part.bootable, part.num)
File "/usr/share/system-config-lvm/BlockDevice.py", line 213, in addNoAlign
self.__insert(part)
File "/usr/share/system-config-lvm/BlockDevice.py", line 218, in __insert
self.__insert2(part, self.__segs, False)
File "/usr/share/system-config-lvm/BlockDevice.py", line 248, in __insert2
raise BlockDeviceErr_cannotFit()
BlockDevice.BlockDeviceErr_cannotFit: <BlockDevice.BlockDeviceErr_cannotFit instance at 0xb7b7af2c>

Any help is welcome.

boaojatista
18th May 2006, 11:26 PM
Sorry,
I forgot to give essential information. Here it is :

FC5 kernel 2.6.15-1.2054
Motherboard ASUS A8N-E nvidia shipset
AMD 64 3000+
2 HD Samsung s-ata model SP2504C 250 GB
Serial ATA controller nvidia with RAID enabled (BIOS both disks)
1 LVM

JEO
19th May 2006, 08:02 AM
I believe there is a bug in system-config-lvm not working if you have a software dmraid active.

I don't know if they released a fix yet or not check bugzilla against system-config-lvm with dmraid.

boaojatista
21st May 2006, 12:07 AM
I found it, but it is still opened.
Thank you anyway.

JEO
21st May 2006, 04:59 AM
In the meantime you should be able to open a terminal window and use the command line lvm commands, what were you going to do in system-config-lvm?

boaojatista
21st May 2006, 06:40 AM
Yes I know it. I have modified my "partition" layout. It is not really a serious issue since you have the command line interface, but it would be nice to have a GUI working fine. I made some mistakes in the installation process and I think that is too late now (i should have created 2 raids volumes instead of only one). I am preparing the system to install other distros because I can't upgrade the kernel and the one I am running (2.6.15-1.2054) does not support non-GPL modules (http://clunixchit.blogspot.com/2006/03/fc5-ati-or-nvidia-drivers.html ). I have posted a bug about this but till now, no response as well (Bugzilla Bug 192165 Kernel does not boot after regular update).