PDA

View Full Version : K3B/mkisofs fails - Value too large for defined data type ?



tfindlay
5th April 2006, 10:08 AM
Hi,

Tried burning a 4.3GB file to a single-layer DVD and bloody K3B crapped it on me. Any suggestions ?

Here's the debug output:


System
-----------------------
K3b Version: 0.12

KDE Version: 3.5.1-0.1.fc4 Red Hat
QT Version: 3.3.4
Kernel: 2.6.16-1.2069_FC4smp
Devices
-----------------------
PIONEER DVD-RW DVR-109 1.17 (/dev/hdb, ) at /media/cdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-R Dual Layer Jump; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

K3b
-----------------------
Size of filesystem calculated: 1415

Used versions
-----------------------
mkisofs: 2.1
growisofs: 5.21

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdb obs=32k seek=0'
/dev/hdb: restarting DVD+RW format...
/dev/hdb: "Current Write Speed" is 4.1x1385KBps.
0/2897920 ( 0.0%) @0x, remaining ??:??
0/2897920 ( 0.0%) @0x, remaining ??:??
0/2897920 ( 0.0%) @0x, remaining ??:??
1605632/2897920 (55.4%) @0.3x, remaining 0:12
/dev/hdb: flushing cache
/dev/hdb: writing lead-out

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdb=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1415 -dvd-compat -speed=4

mkisofs
-----------------------
/usr/bin/mkisofs: Value too large for defined data type. File /home/somewhere/something.mdf is too large - ignoring
1415
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
/usr/bin/mkisofs: Value too large for defined data type. File /home/somewhere/something.mdf is too large - ignoring
35.62% done, estimate finish Wed Apr 5 18:57:29 2006
71.38% done, estimate finish Wed Apr 5 18:57:05 2006
Total translation table size: 0
Total rockridge attributes bytes: 2535
Total directory bytes: 8192
Path table size(bytes): 68
Max brk space used 0
1415 extents written (2 MB)

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-tim/k3brzBiTa.tmp -rational-rock -hide-list /tmp/kde-tim/k3bq3fnfc.tmp -joliet -hide-joliet-list /tmp/kde-tim/k3b4ouvJa.tmp -udf -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-tim/k3bTge0ub.tmp

daneel971
5th April 2006, 10:21 AM
You said:

Tried burning a 4.3GB file to a single-layer DVD
But K3b reports something strange:

Size of filesystem calculated: 1415
the command:

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdb=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1415 -dvd-compat -speed=4
looks wrong where says "dev/hdb=/dev/fd/0" - should be something like /dev/hdb=myimagefile.iso (are you burning an image, aren't you?)


/usr/bin/mkisofs: Value too large for defined data type. File /home/somewhere/something.mdf is too large - ignoring
Can you report the exact error?
Also, try growisofs on the commandline.
A good place where to search for help/hints is the K3b website - click on the "feedback" link and do a search there.

tfindlay
5th April 2006, 10:42 AM
1. I agree, the size does seem incredibly small. I have no idea where it got this from! This could be total size of the remaining files on the disk.

2. I agree also, it doesnt look right ... /dev/fd/0 sounds awefully wrong, I dont know where K3B got this from. It made the command line, not me! I'm not burning a pre-canned image, I selected "New data DVD" and dragged a handful of files over.... one of these was a .MDF file, which is a DVD image, but I only wanted to transport the raw files, not nessasarily unpack them.

3. That is the whole error. I got no more information that what I posted here.

daneel971
5th April 2006, 11:10 AM
Maybe this is your problem?
http://club.cdfreaks.com/showthread.php?t=155939

tfindlay
5th April 2006, 01:24 PM
Thats exactly my problem! (I think).

I have now ticked the "UDF" box in K3b, but I'm out of Single layer DVD's! I'll pick some up tomorrow and try it out.

Many Thanks!