USR 2610b modem issues

[distincthead]

Well, I'm running FC4 and I can't use my winmodem anymore because of the 2.6.x kernel, so I went out today and bought myself a new HARDWARE CONTROLLED modem. At first, I had no luck. Now, I'm just confused. Here are the various things I'm experiencing, maybe you can piece them together and give me some info.

First off, when I boot up (at the starting acpi part) AND/OR when I try and install the RPM from USR, I get the following output:

Cannot set serial info: Invalid argument
Cannot set serial info: Invalid argument
Cannot set serial info: Invalid argument
Cannot set serial info: Invalid argument
Cannot set serial info: Invalid argument
Cannot set serial info: Invalid argument
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
/dev/ttyS2 at 0xd000 (irq = 11) is a 16550A
/dev/ttyS4 at 0xdc00 (irq = 11) is a 16550A

What the hell does that mean? I tried switching PCI slots with the cards, removing all but the necessary PCI devices in my computer, etc. According to windows, my card is running on interrupt req. 7, comm5, device 15. looks like it's not detecting the modem, doesn't it? Well here's the weird part! kPPP can't detect the modem at ttyS0 thru 4, or at /dev/modem. HOWEVER, I tried configuring wvdial and once I did that, I can get wvdial to dial out. It dials out, does the usual wvdial stuff (u/n prompt, pw prompt, 'looks like a welcome message', gives me my mtu, IP, dns info, etc.), but none of my browsers seem to work (can't connect) and ping just says 'unknown host', usually a sign of no internet connection.

I dunno, guys (and gals), I'm stumped. Someone help!!!!

(by the way, the modem works in windows, of course... so we know the hardware works at least)

thnx,
eric

[distincthead]

Here's some more info.

I switched to another kernel, and now I'm getting:

/dev/ttyS4: No such file or directory
/dev/ttyS5: No such file or directory
/dev/ttyS6: No such file or directory
/dev/ttyS7: No such file or directory
/dev/ttyS8: No such file or directory
/dev/ttyS9: No such file or directory
/dev/ttyS10: No such file or directory
/dev/ttyS11: No such file or directory
/dev/ttyS12: No such file or directory
/dev/ttyS13: No such file or directory
/dev/ttyS14: No such file or directory
/dev/ttyS15: No such file or directory
/dev/ttyS16: No such file or directory
/dev/ttyS17: No such file or directory
/dev/ttyS18: No such file or directory
/dev/ttyS19: No such file or directory
/dev/ttyS20: No such file or directory
/dev/ttyS21: No such file or directory
/dev/ttyS22: No such file or directory
/dev/ttyS23: No such file or directory
/dev/ttyS24: No such file or directory
/dev/ttyS25: No such file or directory
/dev/ttyS26: No such file or directory
/dev/ttyS27: No such file or directory
/dev/ttyS28: No such file or directory
/dev/ttyS29: No such file or directory
/dev/ttyS30: No such file or directory
/dev/ttyS31: No such file or directory
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
/dev/ttyS2 at 0xd000 (irq = 11) is a 16550A
/dev/ttyS3 at 0xe000 (irq = 5) is a 16550A

Here's the contents of cat /proc/pci:

[root@localhost ~]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 1106:3099 (rev 0).
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 1106:b099 (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 8, function 0:
Class 0100: PCI device 9005:0080 (rev 2).
IRQ 11.
Master Capable. Latency=32. Min Gnt=40.Max Lat=25.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 64 bit memory at 0xea101000 [0xea101fff].
Bus 0, device 9, function 0:
Class 0401: PCI device 1102:0002 (rev 8).
IRQ 11.
Master Capable. Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xd400 [0xd41f].
Bus 0, device 9, function 1:
Class 0980: PCI device 1102:7002 (rev 8).
Master Capable. Latency=32.
I/O at 0xd800 [0xd807].
Bus 0, device 13, function 0:
Class 0200: PCI device 8086:1229 (rev 8).
IRQ 5.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xea100000 [0xea100fff].
I/O at 0xdc00 [0xdc3f].
Non-prefetchable 32 bit memory at 0xea000000 [0xea0fffff].
Bus 0, device 15, function 0:
Class 0700: PCI device 12b9:1008 (rev 1).
IRQ 5.
I/O at 0xe000 [0xe007].
Bus 0, device 17, function 0:
Class 0601: PCI device 1106:3147 (rev 0).
Bus 0, device 17, function 1:
Class 0101: PCI device 1106:0571 (rev 6).
IRQ 10.
Master Capable. Latency=32.
I/O at 0xe400 [0xe40f].
Bus 0, device 17, function 2:
Class 0c03: PCI device 1106:3038 (rev 35).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xe800 [0xe81f].
Bus 0, device 17, function 3:
Class 0c03: PCI device 1106:3038 (rev 35).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xec00 [0xec1f].
Bus 1, device 0, function 0:
Class 0300: PCI device 102b:0525 (rev 4).
IRQ 10.
Master Capable. Latency=32. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff].
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6003fff].
Non-prefetchable 32 bit memory at 0xe7000000 [0xe77fffff].

Here's what WVDial has to say:

[root@localhost ~]# wvdial
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT2664009
--> Waiting for carrier.
ATDT2664009
CONNECT 49333/ARQ/V92/LAPM/V42BIS
--> Carrier detected. Waiting for prompt.
Level 3 Comm nas20.stm1 UQKT2
Username:/login:/Login:
--> Looks like a login prompt.
--> Sending: censored
censored
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP Session.
IP address is 4.245.185.13
MTU is 1524.
--> Looks like a welcome message.
--> Starting pppd at Sun Feb 5 20:40:49 2006
--> pid of pppd: 3026
--> Using interface ppp0
--> local IP address 4.245.185.13
--> remote IP address 209.247.22.116
--> primary DNS address 209.244.0.3
--> secondary DNS address 209.244.0.4

and here's what wvdialconf has to say:

[root@localhost ~]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.

Port Scan<*1>: Scanning ttyS3 first, /dev/modem is a link to it.
ttyS3<*1>: ATQ0 V1 E1 -- OK
ttyS3<*1>: ATQ0 V1 E1 Z -- OK
ttyS3<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS3<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS3<*1>: Modem Identifier: ATI -- 5601
ttyS3<*1>: Speed 4800: AT -- OK
ttyS3<*1>: Speed 9600: AT -- OK
ttyS3<*1>: Speed 19200: AT -- OK
ttyS3<*1>: Speed 38400: AT -- OK
ttyS3<*1>: Speed 57600: AT -- OK
ttyS3<*1>: Speed 115200: AT -- OK
ttyS3<*1>: Max speed is 115200; that should be safe.
ttyS3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2

Found a modem on /dev/ttyS3, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttyS3<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

and here's some more random dmesg | more info

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
0000:00:0f.0: ttyS2 at I/O 0xe000 (irq = 5) is a 16550A

and i'm also getting:

ttyS2: LSR safety check engaged!

which sometimes shows up as ttyS3 isntead...

[distincthead]

bump for the early mornin' crew ---- PLEASE HELP!