Fedora Linux Support Community & Resources Center

Home Forums Posting Rules Linux Help Fedora Set-Up Guides Ask Fedora Fedora Project
Go Back   FedoraForum.org > Other Versions > EOL (End Of Life) Versions
Reload this Page IBM Netfinity 5500M10 SMP will not boot FC3, non-SMP fine
FedoraForum Search
Forgot Password? Join Us!
Register All Albums FAQ Search Today's Posts Mark Forums Read

EOL (End Of Life) Versions This is a Forum to discuss problems and workarounds for versions of Fedora that have passed End of Life.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10th March 2005, 03:46 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
IBM Netfinity 5500M10 SMP will not boot FC3, non-SMP fine
Using Fedora Core 3, I have attempted several time to get SMP working on this box with no success. I have read several other posts on this forum regarding the same system with similar problems, but none of the suggestions seem to help here, and the setups they had weren't exactly the same. The closest post is http://www.fedoraforum.org/forum/sho...ight=netfinity, but is not the same system or controller, but the symptoms are similar. My specific problem is this:

IBM Netfinity 5500M10, Dual XEON (PIII) 550, 768MB RAM, NetRAID II on board (DDS-4 tape drive is the only device, SCSI ID2), NetRAID3H in PCI Slot (RAIDS: 1: 2x9GB drive(18GB total space), stripped(/), 2: Dual 18GB drives, mirrored(/home), 3: Dual 18GB Drives, mirrored(not used but set up as a logical drive). The RAID setup is correct, as it was previously set up with Windows 2000 Server and working fine immediately before installing FC, and after re-installing to test. The system will boot fine with a non-SMP kernel, but will hang with cannot find device when booting the SMP Kernel, both the stock and the updated one using yum. The only thing I have noticed is that the CPU indicators seem to fade back and forth, like the load is shifting from one to the other while it is apprantly attempting to load the drives. I have tried setting the first RAID with LVM and without, with the same results.

First question: Is there a way to boot the install CD with the SMP kernel and install with that rather than the default (just pressing enter when the prompt comes up?) which is non-SMP? Where would I look to make sure that the RAID drivers are present for the SMP kernel as apparently the non-SMP kernel has them. Any help would be (more than) appreciated.
Reply With Quote
  #2  
Old 10th March 2005, 03:48 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Sorry, the controllers are ServerRAID, not NetRAID.
Reply With Quote
  #3  
Old 10th March 2005, 05:12 PM
james_in_denver Offline
Registered User
  
Join Date: Oct 2004
Posts: 1,227
Can you please tell me what it says when it stops loading, the last couple of lines on the console.

Can you boot off of the first install disk with "linux rescue" and post "/var/log/messages" along with the output from "dmesg"
__________________
Only dead fish go with the flow....

Hmmm, what did I miss?
Reply With Quote
  #4  
Old 10th March 2005, 10:14 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Thank you for responding. A little more detail for you before I get to the info requested. The System BIOS is revision 13, ServerRAID BIOS is 7.10.18, First controller BIOS (ServerRAID2) is 2.88.13, and the second controller (ServerRAID-3H) is 6.10.24. All of these are the latest I could find on IBMs web, so are as up to date as I can get them. The kernel version used is 2.6.9-1.667smp, but the non-smp version of the same kernel boots fine.

Sequence:

System boots, runs GRUB, which boots linux 2.6.9-1.667smp, goes until it hits the line "Red Hat nash version 4.1.18 starting", then freezes for approx 5-7 minutes:

Booting 'Fedora Core (2.6.9-1.667smp)'

root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
Kernel /vmlinuz-2.6.9-1.667smp ro root=LABEL=/ rhgb quiet
[Linux-bzImage, setup=0x1400, size=0x14d2a0]
initrd /initrd-2.6.9-1.667smp.img
[Linux-initrd @ 0x2ff6f000, 0x7b15c bytes]

Uncompressing Linux... Ok, booting the kernel.
audit(1110472194.409:0): initialized
Red Hat nash version 4.1.18 starting
...(freezes approx 5-7 minutes, then)....
mkrootdev: label / not found
mount: error 2 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd/dev/ failed: 2
Kernel panic - not syncing: Attempted to kill init!


System is locked up at this point. There are no /var/log/messages entries for the smp boot attempts. If I boot using the grub entry "Fedora Core-up (2.6.9-1.667)", it boots all the way up.


Here is the entire /var/log/messages from the succesful non-smp boot. There are no backup messages files:

Mar 10 16:53:43 ibm5500M10 syslogd 1.4.1: restart.
Mar 10 16:53:43 ibm5500M10 syslog: syslogd startup succeeded
Mar 10 16:53:43 ibm5500M10 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 10 16:53:43 ibm5500M10 kernel: Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-provided physical RAM map:
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 0000000000100000 - 000000002fffb040 (usable)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 000000002fffb040 - 0000000030000000 (ACPI data)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 10 16:53:43 ibm5500M10 kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Mar 10 16:53:43 ibm5500M10 kernel: 0MB HIGHMEM available.
Mar 10 16:53:43 ibm5500M10 kernel: 767MB LOWMEM available.
Mar 10 16:53:43 ibm5500M10 syslog: klogd startup succeeded
Mar 10 16:53:43 ibm5500M10 kernel: zapping low mappings.
Mar 10 16:53:43 ibm5500M10 kernel: DMI 2.1 present.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PM-Timer IO Port: 0xfd08
Mar 10 16:53:44 ibm5500M10 kernel: Built 1 zonelists
Mar 10 16:53:44 ibm5500M10 kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
Mar 10 16:53:44 ibm5500M10 kernel: mapped 4G/4G trampoline to ffff4000.
Mar 10 16:53:44 ibm5500M10 kernel: Initializing CPU#0
Mar 10 16:53:44 ibm5500M10 kernel: CPU 0 irqstacks, hard=023d5000 soft=023d4000
Mar 10 16:53:44 ibm5500M10 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Mar 10 16:53:44 ibm5500M10 kernel: Detected 547.801 MHz processor.
Mar 10 16:53:44 ibm5500M10 kernel: Using tsc for high-res timesource
Mar 10 16:53:44 ibm5500M10 kernel: Console: colour VGA+ 80x25
Mar 10 16:53:44 ibm5500M10 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 10 16:53:44 ibm5500M10 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 10 16:53:44 ibm5500M10 kernel: Memory: 774972k/786412k available (2068k kernel code, 10776k reserved, 647k data, 144k init, 0k highmem)
Mar 10 16:53:44 ibm5500M10 kernel: Security Scaffold v1.0.0 initialized
Mar 10 16:53:44 ibm5500M10 kernel: SELinux: Initializing.
Mar 10 16:53:44 ibm5500M10 kernel: SELinux: Starting in permissive mode
Mar 10 16:53:44 ibm5500M10 kernel: There is already a security framework initialized, register_security failed.
Mar 10 16:53:44 ibm5500M10 kernel: selinux_register_security: Registering secondary module capability
Mar 10 16:53:44 ibm5500M10 kernel: Capability LSM initialized as secondary
Mar 10 16:53:44 ibm5500M10 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 10 16:53:44 ibm5500M10 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 10 16:53:44 ibm5500M10 kernel: CPU: L2 cache: 512K
Mar 10 16:53:44 ibm5500M10 kernel: Intel machine check architecture supported.
Mar 10 16:53:44 ibm5500M10 kernel: Intel machine check reporting enabled on CPU#0.
Mar 10 16:53:44 ibm5500M10 kernel: CPU: Intel Pentium III (Katmai) stepping 03
Mar 10 16:53:44 ibm5500M10 kernel: Enabling fast FPU save and restore... done.
Mar 10 16:53:44 ibm5500M10 kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 10 16:53:44 ibm5500M10 kernel: Checking 'hlt' instruction... OK.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: IRQ9 SCI: Level Trigger.
Mar 10 16:53:44 ibm5500M10 kernel: checking if image is initramfs... it is
Mar 10 16:53:44 ibm5500M10 kernel: Freeing initrd memory: 500k freed
Mar 10 16:53:44 ibm5500M10 kernel: NET: Registered protocol family 16
Mar 10 16:53:44 ibm5500M10 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd5ec, last bus=5
Mar 10 16:53:44 ibm5500M10 kernel: PCI: Using configuration type 1
Mar 10 16:53:44 ibm5500M10 kernel: mtrr: v2.0 (20020519)
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Subsystem revision 20040816
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Interpreter enabled
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Using PIC for interrupt routing
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Mar 10 16:53:44 ibm5500M10 kernel: PCI: Probing PCI hardware (bus 00)

<Continued>
Reply With Quote
  #5  
Old 10th March 2005, 10:16 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK6A._CRS] (Node 31f44900), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK6A] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK6A._DIS] (Node 31f44920), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK6A._DIS] (Node 31f44920), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK6B._CRS] (Node 31f45800), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK6B] (IRQs) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK6B._DIS] (Node 31f45820), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK6B._DIS] (Node 31f45820), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK6C._CRS] (Node 31f45700), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK6C] (IRQs) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK6C._DIS] (Node 31f45720), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK6C._DIS] (Node 31f45720), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK6D._CRS] (Node 31f45600), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK6D] (IRQs) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK6D._DIS] (Node 31f45620), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK6D._DIS] (Node 31f45620), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK5A._CRS] (Node 31f45500), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK5A] (IRQs) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK5A._DIS] (Node 31f45520), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK5A._DIS] (Node 31f45520), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK5B._CRS] (Node 31f45400), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK5B] (IRQs 15) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK5B._DIS] (Node 31f45420), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK5B._DIS] (Node 31f45420), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK5C._CRS] (Node 31f45300), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK5C] (IRQs 11) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK5C._DIS] (Node 31f45320), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK5C._DIS] (Node 31f45320), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LK5D._CRS] (Node 31f45200), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK5D] (IRQs 10) *0, disabled.
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LK5D._DIS] (Node 31f45220), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LK5D._DIS] (Node 31f45220), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LKS3._CRS] (Node 31f45fe0), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LKS3] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LKS3._DIS] (Node 31f45120), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LKS3._DIS] (Node 31f45120), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LKNE._CRS] (Node 31f45ee0), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LKNE] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LKNE._DIS] (Node 31f45f00), AE_AML_OPERAND_TYPE

<Continued>
Reply With Quote
  #6  
Old 10th March 2005, 10:17 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LKNE._DIS] (Node 31f45f00), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LKVP._CRS] (Node 31f45de0), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LKVP] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 irqbalance: irqbalance startup succeeded
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LKVP._DIS] (Node 31f45e00), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LKVP._DIS] (Node 31f45e00), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.LKUS._CRS] (Node 31f45ce0), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LKUS] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LKUS._DIS] (Node 31f45d00), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LKUS._DIS] (Node 31f45d00), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK4A._CRS] (Node 31f45980), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK4A] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4A._DIS] (Node 31f459a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4A._DIS] (Node 31f459a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK4B._CRS] (Node 31f47880), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK4B] (IRQs 15) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4B._DIS] (Node 31f458a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4B._DIS] (Node 31f458a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK4C._CRS] (Node 31f47780), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK4C] (IRQs 11) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4C._DIS] (Node 31f477a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4C._DIS] (Node 31f477a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK4D._CRS] (Node 31f47680), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK4D] (IRQs 10) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4D._DIS] (Node 31f476a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4D._DIS] (Node 31f476a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3A._CRS] (Node 31f47580), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK3A] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3A._DIS] (Node 31f475a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3A._DIS] (Node 31f475a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3B._CRS] (Node 31f47480), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK3B] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3B._DIS] (Node 31f474a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3B._DIS] (Node 31f474a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3C._CRS] (Node 31f47380), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK3C] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3C._DIS] (Node 31f473a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3C._DIS] (Node 31f473a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3D._CRS] (Node 31f47280), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK3D] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3D._DIS] (Node 31f472a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3D._DIS] (Node 31f472a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2A._CRS] (Node 31f47180), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK2A] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2A._DIS] (Node 31f471a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2A._DIS] (Node 31f471a0), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2B._CRS] (Node 31f47f60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK2B] (IRQs 15) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PCI1.LK2B._DIS] (Node 31f47f80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2B._DIS] (Node 31f47f80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2C._CRS] (Node 31f47e60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK2C] (IRQs 11) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2C._DIS] (Node 31f47e80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2C._DIS] (Node 31f47e80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2D._CRS] (Node 31f47d60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK2D] (IRQs 10) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2D._DIS] (Node 31f47d80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2D._DIS] (Node 31f47d80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1A._CRS] (Node 31f47c60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK1A] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1A._DIS] (Node 31f47c80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1A._DIS] (Node 31f47c80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1B._CRS] (Node 31f47b60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK1B] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1B._DIS] (Node 31f47b80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1B._DIS] (Node 31f47b80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1C._CRS] (Node 31f47a60), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK1C] (IRQs) *0
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1C._DIS] (Node 31f47a80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1C._DIS] (Node 31f47a80), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1D._CRS] (Node 31f47960), AE_NOT_EXIST
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI Interrupt Link [LK1D] (IRQs) *0

<continued>
Reply With Quote
  #7  
Old 10th March 2005, 10:18 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1D._DIS] (Node 31f47980), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1D._DIS] (Node 31f47980), AE_AML_OPERAND_TYPE
Mar 10 16:53:44 ibm5500M10 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 10 16:53:44 ibm5500M10 kernel: usbcore: registered new driver usbfs
Mar 10 16:53:44 ibm5500M10 kernel: usbcore: registered new driver hub
Mar 10 16:53:44 ibm5500M10 kernel: PCI: Using ACPI for IRQ routing
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKVP] (likely buggy ACPI BIOS).
Mar 10 16:53:44 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:03.0[A]: no GSI - using IRQ 11
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LK6A] (likely buggy ACPI BIOS).
Mar 10 16:53:44 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 10
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKNE] (likely buggy ACPI BIOS).
Mar 10 16:53:44 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 11
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKS3] (likely buggy ACPI BIOS).
Mar 10 16:53:44 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 9
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKUS] (likely buggy ACPI BIOS).
Mar 10 16:53:44 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:44 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:13.2[D]: no GSI - using IRQ 10
Mar 10 16:53:44 ibm5500M10 kernel: IBM machine detected. Enabling interrupts during APM calls.
Mar 10 16:53:44 ibm5500M10 kernel: apm: BIOS not found.
Mar 10 16:53:44 ibm5500M10 kernel: audit: initializing netlink socket (disabled)
Mar 10 16:53:44 ibm5500M10 kernel: audit(1110473554.096:0): initialized
Mar 10 16:53:44 ibm5500M10 kernel: Total HugeTLB memory allocated, 0
Mar 10 16:53:44 ibm5500M10 kernel: VFS: Disk quotas dquot_6.5.1
Mar 10 16:53:44 ibm5500M10 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 10 16:53:44 ibm5500M10 kernel: SELinux: Registering netfilter hooks
Mar 10 16:53:44 ibm5500M10 kernel: Initializing Cryptographic API
Mar 10 16:53:45 ibm5500M10 kernel: ksign: Installing public key data
Mar 10 16:53:45 ibm5500M10 kernel: Loading keyring
Mar 10 16:53:45 ibm5500M10 kernel: - Added public key 6ECDA687281A73E5
Mar 10 16:53:45 ibm5500M10 kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Mar 10 16:53:45 ibm5500M10 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 10 16:53:45 ibm5500M10 kernel: vesafb: probe of vesafb0 failed with error -6
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Processor [CPU0] (supports C1)
Mar 10 16:53:45 ibm5500M10 kernel: isapnp: Scanning for PnP cards...
Mar 10 16:53:45 ibm5500M10 kernel: isapnp: No Plug & Play device found
Mar 10 16:53:45 ibm5500M10 kernel: Real Time Clock Driver v1.12
Mar 10 16:53:45 ibm5500M10 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Mar 10 16:53:45 ibm5500M10 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 10 16:53:45 ibm5500M10 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 10 16:53:45 ibm5500M10 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
Mar 10 16:53:45 ibm5500M10 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 10 16:53:45 ibm5500M10 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 10 16:53:45 ibm5500M10 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar 10 16:53:45 ibm5500M10 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 10 16:53:45 ibm5500M10 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 10 16:53:45 ibm5500M10 kernel: PIIX4: IDE controller at PCI slot 0000:00:13.1
Mar 10 16:53:45 ibm5500M10 kernel: PIIX4: chipset revision 1
Mar 10 16:53:45 ibm5500M10 kernel: PIIX4: not 100%% native mode: will probe irqs later
Mar 10 16:53:45 ibm5500M10 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaio, hdbio
Mar 10 16:53:45 ibm5500M10 kernel: hda: CD-ROM CDU701-F, ATAPI CD/DVD-ROM drive
Mar 10 16:53:45 ibm5500M10 kernel: Using cfq io scheduler
Mar 10 16:53:45 ibm5500M10 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 10 16:53:45 ibm5500M10 kernel: hda: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Mar 10 16:53:45 ibm5500M10 kernel: Uniform CD-ROM driver Revision: 3.20
Mar 10 16:53:45 ibm5500M10 kernel: ide-floppy driver 0.99.newide
Mar 10 16:53:45 ibm5500M10 kernel: usbcore: registered new driver hiddev
Mar 10 16:53:45 ibm5500M10 kernel: usbcore: registered new driver usbhid
Mar 10 16:53:45 ibm5500M10 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Mar 10 16:53:45 ibm5500M10 kernel: mice: PS/2 mouse device common for all mice
Mar 10 16:53:45 ibm5500M10 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 10 16:53:45 ibm5500M10 kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Mar 10 16:53:45 ibm5500M10 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 10 16:53:45 ibm5500M10 kernel: NET: Registered protocol family 2
Mar 10 16:53:45 ibm5500M10 kernel: IP: routing cache hash table of 2048 buckets, 64Kbytes
Mar 10 16:53:45 ibm5500M10 kernel: TCP: Hash tables configured (established 262144 bind 37449)
Mar 10 16:53:45 ibm5500M10 kernel: Initializing IPsec netlink socket
Mar 10 16:53:45 ibm5500M10 kernel: NET: Registered protocol family 1
Mar 10 16:53:45 ibm5500M10 kernel: NET: Registered protocol family 17
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: (supports S0 S4 S5)
Mar 10 16:53:45 ibm5500M10 kernel: ACPI wakeup devices:
Mar 10 16:53:45 ibm5500M10 kernel:
Mar 10 16:53:45 ibm5500M10 kernel: Freeing unused kernel memory: 144k freed
Mar 10 16:53:45 ibm5500M10 kernel: SCSI subsystem initialized
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKVP] (likely buggy ACPI BIOS).
Mar 10 16:53:45 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:03.0[A]: no GSI - using IRQ 11
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch
Mar 10 16:53:45 ibm5500M10 portmap: portmap startup succeeded
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:03.0: Bios = 7.10.18, Firmware = 2.88.13, Device Driver = 7.00.15
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:03.0: These levels should match to avoid possible compatibility problems.
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LK6A] (likely buggy ACPI BIOS).
Mar 10 16:53:45 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 10
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:06.0: Warning ! ! ! ServeRAID Version Mismatch
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:06.0: Bios = 7.10.18, Firmware = 6.10.24, Device Driver = 7.00.15
Mar 10 16:53:45 ibm5500M10 kernel: ips 0000:00:06.0: These levels should match to avoid possible compatibility problems.
Mar 10 16:53:45 ibm5500M10 kernel: scsi0 : IBM PCI ServeRAID 7.00.15 Build 625 <ServeRAID II>
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: IBM Model: SERVERAID Rev: 1.00
Mar 10 16:53:45 ibm5500M10 kernel: Type: Processor ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 910B
Mar 10 16:53:45 ibm5500M10 kernel: Type: Sequential-Access ANSI SCSI revision: 03
Mar 10 16:53:45 ibm5500M10 kernel: scsi1 : IBM PCI ServeRAID 7.00.15 Build 625 <ServeRAID 3H>
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: IBM Model: SERVERAID Rev: 1.00
Mar 10 16:53:45 ibm5500M10 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sda: 35545088 512-byte hdwr sectors (18199 MB)
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sda: drive cache: write through
Mar 10 16:53:45 ibm5500M10 kernel: sda: sda1 sda2 sda3
Mar 10 16:53:45 ibm5500M10 kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: IBM Model: SERVERAID Rev: 1.00
Mar 10 16:53:45 ibm5500M10 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sdb: 35547136 512-byte hdwr sectors (18200 MB)
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sdb: drive cache: write through
Mar 10 16:53:45 ibm5500M10 kernel: sdb: sdb1
Mar 10 16:53:45 ibm5500M10 kernel: Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: IBM Model: SERVERAID Rev: 1.00
Mar 10 16:53:45 ibm5500M10 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sdc: 35547136 512-byte hdwr sectors (18200 MB)
Mar 10 16:53:45 ibm5500M10 kernel: SCSI device sdc: drive cache: write through
Mar 10 16:53:45 ibm5500M10 kernel: sdc: sdc1
Mar 10 16:53:45 ibm5500M10 kernel: Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: IBM Model: SERVERAID Rev: 1.00

<continued>
Reply With Quote
  #8  
Old 10th March 2005, 10:20 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Mar 10 16:53:45 ibm5500M10 kernel: Type: Processor ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: Vendor: SDR Model: GEM200 Rev: 2
Mar 10 16:53:45 ibm5500M10 kernel: Type: Processor ANSI SCSI revision: 02
Mar 10 16:53:45 ibm5500M10 kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Mar 10 16:53:45 ibm5500M10 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 16:53:45 ibm5500M10 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 16:53:45 ibm5500M10 kernel: security: 3 users, 4 roles, 280 types, 16 bools
Mar 10 16:53:45 ibm5500M10 kernel: security: 53 classes, 5494 rules
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: Completing initialization.
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: Setting up existing superblocks.
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev sda3, type ext3), uses xattr
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev devpts, type devpts), uses transition SIDs
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev proc, type proc), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
Mar 10 16:53:45 ibm5500M10 kernel: Attached scsi tape st0 at scsi0, channel 2, id 2, lun 0
Mar 10 16:53:45 ibm5500M10 kernel: st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
Mar 10 16:53:45 ibm5500M10 kernel: inserting floppy driver for 2.6.9-1.667
Mar 10 16:53:45 ibm5500M10 kernel: Floppy drive(s): fd0 is 1.44M
Mar 10 16:53:45 ibm5500M10 kernel: FDC 0 is a National Semiconductor PC87306
Mar 10 16:53:45 ibm5500M10 kernel: pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKNE] (likely buggy ACPI BIOS).
Mar 10 16:53:45 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 11
Mar 10 16:53:45 ibm5500M10 kernel: pcnet32: PCnet/FAST 79C971 at 0x2180, warning: CSR address invalid,
Mar 10 16:53:45 ibm5500M10 kernel: using instead PROM address of 00 06 29 38 f6 2d
Mar 10 16:53:45 ibm5500M10 kernel: tx_start_pt(0x0c00):~220 bytes, BCR18(9861):BurstWrEn BurstRdEn NoUFlow
Mar 10 16:53:45 ibm5500M10 kernel: SRAMSIZE=0x7f00, SRAM_BND=0x0800, assigned IRQ 11.
Mar 10 16:53:45 ibm5500M10 kernel: eth0: registered as PCnet/FAST 79C971
Mar 10 16:53:45 ibm5500M10 kernel: pcnet32: 1 cards_found.
Mar 10 16:53:45 ibm5500M10 kernel: USB Universal Host Controller Interface driver v2.2
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Unable to set IRQ for PCI Interrupt Link [LKUS] (likely buggy ACPI BIOS).
Mar 10 16:53:45 ibm5500M10 kernel: Try pci=noacpi or acpi=off
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: PCI interrupt 0000:00:13.2[D]: no GSI - using IRQ 10
Mar 10 16:53:45 ibm5500M10 kernel: uhci_hcd 0000:00:13.2: UHCI Host Controller
Mar 10 16:53:45 ibm5500M10 kernel: uhci_hcd 0000:00:13.2: irq 10, io base 0000ff00
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: uhci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
Mar 10 16:53:45 ibm5500M10 kernel: hub 1-0:1.0: USB hub found
Mar 10 16:53:45 ibm5500M10 kernel: hub 1-0:1.0: 2 ports detected
Mar 10 16:53:45 ibm5500M10 kernel: md: Autodetecting RAID arrays.
Mar 10 16:53:45 ibm5500M10 kernel: md: autorun ...
Mar 10 16:53:45 ibm5500M10 kernel: md: ... autorun DONE.
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: NET: Registered protocol family 10
Mar 10 16:53:45 ibm5500M10 kernel: Disabled Privacy Extensions on device 02369a00(lo)
Mar 10 16:53:45 ibm5500M10 kernel: IPv6 over IPv4 tunneling driver
Mar 10 16:53:45 ibm5500M10 kernel: ACPI: Power Button (FF) [PWRF]
Mar 10 16:53:45 ibm5500M10 kernel: EXT3 FS on sda3, internal journal
Mar 10 16:53:45 ibm5500M10 kernel: cdrom: open failed.
Mar 10 16:53:45 ibm5500M10 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 16:53:45 ibm5500M10 kernel: EXT3 FS on sda1, internal journal
Mar 10 16:53:45 ibm5500M10 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev sda1, type ext3), uses xattr
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Mar 10 16:53:45 ibm5500M10 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 16:53:45 ibm5500M10 kernel: EXT3 FS on dm-0, internal journal
Mar 10 16:53:45 ibm5500M10 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev dm-0, type ext3), uses xattr
Mar 10 16:53:45 ibm5500M10 kernel: Adding 1535992k swap on /dev/sda2. Priority:-1 extents:1
Mar 10 16:53:45 ibm5500M10 kernel: SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Mar 10 16:53:45 ibm5500M10 kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Mar 10 16:53:45 ibm5500M10 kernel: parport0: irq 7 detected
Mar 10 16:53:45 ibm5500M10 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 10 16:53:45 ibm5500M10 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 10 16:53:45 ibm5500M10 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Mar 10 16:53:45 ibm5500M10 rpc.statd[1927]: Version 1.0.6 Starting
Mar 10 16:53:45 ibm5500M10 nfslock: rpc.statd startup succeeded
Mar 10 16:53:46 ibm5500M10 kernel: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Mar 10 16:53:46 ibm5500M10 rpcidmapd: rpc.idmapd startup succeeded
Mar 10 16:53:47 ibm5500M10 netfs: Mounting other filesystems: succeeded
Mar 10 16:53:47 ibm5500M10 kernel: i2c /dev entries driver
Mar 10 16:53:47 ibm5500M10 rc: Starting lm_sensors: succeeded
Mar 10 16:53:48 ibm5500M10 autofs: automount startup succeeded
Mar 10 16:53:48 ibm5500M10 mDNSResponder: startup succeeded
Mar 10 16:53:53 ibm5500M10 smartd[2073]: smartd version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Home page is http://smartmontools.sourceforge.net/
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Opened configuration file /etc/smartd.conf
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Configuration file /etc/smartd.conf parsed.

<continued>
Reply With Quote
  #9  
Old 10th March 2005, 10:20 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Device: /dev/sda, opened
Mar 10 16:53:53 ibm5500M10 kernel: SCSI error : <1 0 0 0> return code = 0x70000
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Device: /dev/sda, Bad IEC (SMART) mode page, err=5, skip device
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Unable to register SCSI device /dev/sda at line 1 of file /etc/smartd.conf
Mar 10 16:53:53 ibm5500M10 smartd[2073]: Unable to register device /dev/sda (no Directive -d removable). Exiting.
Mar 10 16:53:53 ibm5500M10 smartd: smartd startup failed
Mar 10 16:53:53 ibm5500M10 acpid: acpid startup succeeded
Mar 10 16:53:55 ibm5500M10 kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Mar 10 16:53:55 ibm5500M10 kernel: parport0: irq 7 detected
Mar 10 16:53:55 ibm5500M10 kernel: lp0: using parport0 (polling).
Mar 10 16:53:55 ibm5500M10 kernel: lp0: console ready
Mar 10 16:53:56 ibm5500M10 cups: cupsd startup succeeded
Mar 10 16:54:00 ibm5500M10 sshd: RSA1 key generation succeeded
Mar 10 16:54:02 ibm5500M10 sshd: RSA key generation succeeded
Mar 10 16:54:14 ibm5500M10 sshd: DSA key generation succeeded
Mar 10 16:54:15 ibm5500M10 sshd: succeeded
Mar 10 16:54:15 ibm5500M10 xinetd: xinetd startup succeeded
Mar 10 16:54:15 ibm5500M10 xinetd[2158]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Mar 10 16:54:15 ibm5500M10 xinetd[2158]: Started working: 0 available services
Mar 10 16:54:17 ibm5500M10 sendmail: sendmail startup succeeded
Mar 10 16:54:17 ibm5500M10 sendmail: sm-client startup succeeded
Mar 10 16:54:17 ibm5500M10 gpm[2215]: *** info [startup.c(95)]:
Mar 10 16:54:17 ibm5500M10 gpm[2215]: Started gpm successfully. Entered daemon mode.
Mar 10 16:54:17 ibm5500M10 gpm[2215]: *** info [mice.c(1766)]:
Mar 10 16:54:17 ibm5500M10 gpm[2215]: imps2: Auto-detected intellimouse PS/2
Mar 10 16:54:18 ibm5500M10 gpm: gpm startup succeeded
Mar 10 16:54:18 ibm5500M10 crond: crond startup succeeded
Mar 10 16:54:21 ibm5500M10 xfs: xfs startup succeeded
Mar 10 16:54:21 ibm5500M10 xfs[2258]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable)
Mar 10 16:54:21 ibm5500M10 anacron: anacron startup succeeded
Mar 10 16:54:22 ibm5500M10 atd: atd startup succeeded
Mar 10 16:54:22 ibm5500M10 gconfd (root-2317): starting (version 2.8.1), pid 2317 user 'root'
>Mar 10 16:54:23 ibm5500M10 gconfd (root-2317): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 10 16:54:23 ibm5500M10 gconfd (root-2317): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Mar 10 16:54:23 ibm5500M10 gconfd (root-2317): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Mar 10 16:55:33 ibm5500M10 ntpdate[2374]: can't find host 0.pool.ntp.org
Mar 10 16:55:33 ibm5500M10 ntpdate[2374]: can't find host 1.pool.ntp.org
Mar 10 16:55:33 ibm5500M10 ntpdate[2374]: can't find host 2.pool.ntp.org
Mar 10 16:55:41 ibm5500M10 ntpdate[2374]: no server suitable for synchronization found
Mar 10 16:55:41 ibm5500M10 ntpd: failed
Mar 10 16:55:41 ibm5500M10 ntpd: ntpd startup succeeded
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: ntpd 4.2.0a@1.1190-r Mon Oct 11 09:10:20 EDT 2004 (1)
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: precision = 2.000 usec
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: Listening on interface wildcard, 0.0.0.0#123
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: Listening on interface wildcard, ::#123
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: Listening on interface lo, 127.0.0.1#123
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: Listening on interface eth0, 192.168.10.12#123
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: kernel time sync status 0040
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: getaddrinfo: "0.pool.ntp.org" invalid host address, ignored
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: getaddrinfo: "1.pool.ntp.org" invalid host address, ignored
Mar 10 16:55:41 ibm5500M10 ntpd[2379]: getaddrinfo: "2.pool.ntp.org" invalid host address, ignored
Mar 10 16:56:02 ibm5500M10 firstboot: succeeded
Mar 10 16:56:02 ibm5500M10 readahead: Starting background readahead:
Mar 10 16:56:02 ibm5500M10 rc: Starting readahead: succeeded
Mar 10 16:56:02 ibm5500M10 messagebus: messagebus startup succeeded
Mar 10 16:56:03 ibm5500M10 cups-config-daemon: cups-config-daemon startup succeeded
Mar 10 16:56:03 ibm5500M10 haldaemon: haldaemon startup succeeded
Mar 10 16:56:07 ibm5500M10 fstab-sync[2714]: removed all generated mount points
Mar 10 16:56:10 ibm5500M10 fstab-sync[2907]: added mount point /media/cdrom for /dev/hda
Mar 10 16:56:15 ibm5500M10 fstab-sync[3086]: added mount point /media/floppy for /dev/fd0
Mar 10 16:56:27 ibm5500M10 gpm[2215]: *** info [mice.c(1766)]:
Mar 10 16:56:27 ibm5500M10 gpm[2215]: imps2: Auto-detected intellimouse PS/2
Mar 10 16:56:31 ibm5500M10 login(pam_unix)[2442]: authentication failure; logname= uid=0 euid=0 tty=tty1 ruser= rhost= user=root
Mar 10 16:56:33 ibm5500M10 login[2442]: FAILED LOGIN 1 FROM (null) FOR root, Authentication failure
Mar 10 16:56:36 ibm5500M10 login(pam_unix)[2442]: session opened for user root by (uid=0)
Mar 10 16:56:36 ibm5500M10 -- root[2442]: ROOT LOGIN ON tty1
Mar 10 16:57:40 ibm5500M10 sshd(pam_unix)[3141]: session opened for user root by root(uid=0)

<Continued>
Reply With Quote
  #10  
Old 10th March 2005, 10:22 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
And dmesg:

Method execution failed [\_SB_.PCI0.PCI1.LK4C._DIS] (Node 31f477a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4C._DIS] (Node 31f477a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK4D._CRS] (Node 31f47680), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK4D] (IRQs 10) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4D._DIS] (Node 31f476a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK4D._DIS] (Node 31f476a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3A._CRS] (Node 31f47580), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK3A] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3A._DIS] (Node 31f475a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3A._DIS] (Node 31f475a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3B._CRS] (Node 31f47480), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK3B] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3B._DIS] (Node 31f474a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3B._DIS] (Node 31f474a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3C._CRS] (Node 31f47380), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK3C] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3C._DIS] (Node 31f473a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3C._DIS] (Node 31f473a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK3D._CRS] (Node 31f47280), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK3D] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3D._DIS] (Node 31f472a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK3D._DIS] (Node 31f472a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2A._CRS] (Node 31f47180), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK2A] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2A._DIS] (Node 31f471a0), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2A._DIS] (Node 31f471a0), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2B._CRS] (Node 31f47f60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK2B] (IRQs 15) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2B._DIS] (Node 31f47f80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2B._DIS] (Node 31f47f80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2C._CRS] (Node 31f47e60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK2C] (IRQs 11) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2C._DIS] (Node 31f47e80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2C._DIS] (Node 31f47e80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK2D._CRS] (Node 31f47d60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK2D] (IRQs 10) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2D._DIS] (Node 31f47d80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK2D._DIS] (Node 31f47d80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1A._CRS] (Node 31f47c60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK1A] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1A._DIS] (Node 31f47c80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1A._DIS] (Node 31f47c80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1B._CRS] (Node 31f47b60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK1B] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1B._DIS] (Node 31f47b80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1B._DIS] (Node 31f47b80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1C._CRS] (Node 31f47a60), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK1C] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1C._DIS] (Node 31f47a80), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1C._DIS] (Node 31f47a80), AE_AML_OPERAND_TYPE
ACPI-0169: *** Error: No object was returned from [\_SB_.PCI0.PCI1.LK1D._CRS] (Node 31f47960), AE_NOT_EXIST
ACPI: PCI Interrupt Link [LK1D] (IRQs) *0
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1D._DIS] (Node 31f47980), AE_AML_OPERAND_TYPE
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.PCI1.LK1D._DIS] (Node 31f47980), AE_AML_OPERAND_TYPE
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: Unable to set IRQ for PCI Interrupt Link [LKVP] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:03.0[A]: no GSI - using IRQ 11
ACPI: Unable to set IRQ for PCI Interrupt Link [LK6A] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 10
ACPI: Unable to set IRQ for PCI Interrupt Link [LKNE] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 11
ACPI: Unable to set IRQ for PCI Interrupt Link [LKS3] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 9
ACPI: Unable to set IRQ for PCI Interrupt Link [LKUS] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:13.2[D]: no GSI - using IRQ 10
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1110473554.096:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:13.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaio, hdbio
Probing IDE interface ide0...
hda: CD-ROM CDU701-F, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !

<continued>
Reply With Quote
  #11  
Old 10th March 2005, 10:23 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
ACPI wakeup devices:

Freeing unused kernel memory: 144k freed
SCSI subsystem initialized
ACPI: Unable to set IRQ for PCI Interrupt Link [LKVP] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:03.0[A]: no GSI - using IRQ 11
ips 0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch
ips 0000:00:03.0: Bios = 7.10.18, Firmware = 2.88.13, Device Driver = 7.00.15
ips 0000:00:03.0: These levels should match to avoid possible compatibility problems.
ACPI: Unable to set IRQ for PCI Interrupt Link [LK6A] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 10
ips 0000:00:06.0: Warning ! ! ! ServeRAID Version Mismatch
ips 0000:00:06.0: Bios = 7.10.18, Firmware = 6.10.24, Device Driver = 7.00.15
ips 0000:00:06.0: These levels should match to avoid possible compatibility problems.
scsi0 : IBM PCI ServeRAID 7.00.15 Build 625 <ServeRAID II>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 910B
Type: Sequential-Access ANSI SCSI revision: 03
scsi1 : IBM PCI ServeRAID 7.00.15 Build 625 <ServeRAID 3H>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 35545088 512-byte hdwr sectors (18199 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 35547136 512-byte hdwr sectors (18200 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 35547136 512-byte hdwr sectors (18200 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: SDR Model: GEM200 Rev: 2
Type: Processor ANSI SCSI revision: 02
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 2, id 2, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
ACPI: Unable to set IRQ for PCI Interrupt Link [LKNE] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 11
pcnet32: PCnet/FAST 79C971 at 0x2180, warning: CSR address invalid,
using instead PROM address of 00 06 29 38 f6 2d
tx_start_pt(0x0c00):~220 bytes, BCR18(9861):BurstWrEn BurstRdEn NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x0800, assigned IRQ 11.
divert: allocating divert_blk for eth0
eth0: registered as PCnet/FAST 79C971
pcnet32: 1 cards_found.
USB Universal Host Controller Interface driver v2.2
ACPI: Unable to set IRQ for PCI Interrupt Link [LKUS] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI interrupt 0000:00:13.2[D]: no GSI - using IRQ 10
uhci_hcd 0000:00:13.2: UHCI Host Controller
uhci_hcd 0000:00:13.2: irq 10, io base 0000ff00
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
uhci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda3, internal journal
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-0, type ext3), uses xattr
Adding 1535992k swap on /dev/sda2. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
spurious 8259A interrupt: IRQ7.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
eth0: no IPv6 routers present
SCSI error : <1 0 0 0> return code = 0x70000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready



Here is /etc/grub.conf:

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/sda3
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.9-1.667smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667smp ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-1.667smp.img
title Fedora Core-up (2.6.9-1.667)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-1.667.img

<whew....>
Reply With Quote
  #12  
Old 10th March 2005, 10:42 PM
psik0teq Offline
Registered User
  
Join Date: Mar 2005
Posts: 11
FIXED!!! helps if I type acpi=off right......
fixed it by appending acpi=off in grub. I tried pci=noacpi and acpi=off before, but apparently I mistyped something, because it worked now. Thanks for the help.

new grub:
Here is /etc/grub.conf:

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/sda3
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.9-1.667smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667smp ro root=LABEL=/ rhgb quiet acpi=off
initrd /initrd-2.6.9-1.667smp.img
title Fedora Core-up (2.6.9-1.667)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-1.667.img
Last edited by psik0teq; 10th March 2005 at 10:44 PM. Reason: added stuff...
Reply With Quote
Reply

Tags
boot, fc3, fine, ibm, netfinity, nonsmp, smp

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cant even boot up - Everything WAS working fine mpradeep Using Fedora 1 23rd January 2009 02:27 AM
FC4 CD boots fine, but FC5 does not boot serge EOL (End Of Life) Versions 8 25th April 2006 02:50 PM
Installed from CD fine, won't boot either HDD nor CD after install. pkenoyer Installation and Live Media 7 26th June 2005 07:15 PM
IBM netfinity 5500 won't boot with Fedora3 installed hippo1 Servers & Networking 41 20th April 2005 06:38 PM
FC2 installed fine, but hangs in boot thesun EOL (End Of Life) Versions 3 13th August 2004 01:16 PM


Current GMT-time: 02:19 (Wednesday, 22-05-2013)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.
Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

 FedoraForum is Powered by RedHat