My MB is a Gigabyte 990FXA-UD7. I enabled my IOMMU from the start so I have not experienced any of the issues you mention. The IOMMU provides support for remapping of I/O addresses.
To see if your IOMMU is enabled, Issue the following lspci command as root. It should list both the IOMMU and the Ethernet controller somewhere in the output.
Code:
lspci -v -nn
.
.
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Flags: fast devsel, IRQ 40
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
.
.
.
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Flags: bus master, fast devsel, latency 0, IRQ 46
I/O ports at ae00 [size=256]
Memory at fd8ff000 (64-bit, prefetchable) [size=4K]
Memory at fd8f8000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 12-34-56-78-12-34-56-78
Kernel driver in use: r8169
.
.
Sorry I'm late to the subject, I hope this helps others.