Hi all.
Laptop Lenovo X220i.
Code:
$ uname -a
Linux inszyby 3.4.3-1.fc17.x86_64 #1 SMP Mon Jun 18 19:53:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09
Have a next problem:
I work in dual monitor mode, one of which is connected via VGA port and has a screen resolution of 1920x1080, which is not supported in the GUI.
Code:
$ gtf 1920 1080 60
# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
$ xrandr --newmode "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
$ xrandr --addmode VGA1 1920x1080_60.00
Code:
$ xrandr
Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+312 (normal left inverted right x axis y axis) 277mm x 156mm
1366x768 59.6*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
1920x1080_60.00 60.0*
After xrandr I added this permission, but after reboot all disappears somewhere from settings.
PS earlier (fedora 16) solved the problem by adding a line to the file was in the x11, the file named 99-setmonitormode.sh (but I'm not sure about that). Now I do not remember how to doit...
Bug in dual monitor mode
Linear Mode
