Fedora Linux Support Community & Resources Center
  #1  
Old 24th May 2012, 08:46 PM
Pilate Offline
Registered User
 
Join Date: Sep 2011
Posts: 10
windows_7chrome
VSFTPD connect problem! help me hurry pls

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home# users to NOT chroot().
#chroot_local_user=NO
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
userlist_deny=no
tcp_wrappers=YES



-------------------------------------------------------------
# vsftpd userlist
# If userlist_deny=NO, only allow users in this file
# If userlist_deny=YES (default), never allow users in this file, and
# do not even prompt for a password.
# Note that the default vsftpd pam config also checks /etc/vsftpd/ftpusers
# for users that are denied.
geezer
pontoneli
root
bin
daemon
adm
lp
sync
shutdown
halt
mail
news
uucp
operator
games
nobody
-------------------------------------------------------
GNU nano 2.3.1 File: ftpusers

# Users that are not allowed to login via ftp
root
bin
daemon
adm
lp
sync
shutdown
halt
mail
news
uucp
operator
games
nobody

============================


[root@Pilate vsftpd]# ftp 192.168.2.100
Connected to 192.168.2.100 (192.168.2.100).
220 (vsFTPd 2.3.4)
Name (192.168.2.100:geezer): geezer
331 Please specify the password.
Password:
530 Login incorrect.
Login failed.
ftp> user
(username) pontoneli
331 Please specify the password.
Password:
530 Login incorrect.
Login failed.
ftp>
wath should be problem??
p.s password is correct!

please help me hurry
Reply With Quote
  #2  
Old 28th May 2012, 01:25 PM
codersyard Offline
Registered User
 
Join Date: May 2012
Location: India
Posts: 3
windows_xp_2003chrome
Re: VSFTPD connect problem! help me hurry pls

You may try adding users to chroot_list. The user you are trying must be a valid user of the system.
__________________
Coder's Yard - http://www.codersyard.com/ | CY Affiliate - http://www.codersyard.com/dashboard/affiliate
Reply With Quote
  #3  
Old 30th May 2012, 06:16 AM
Pilate Offline
Registered User
 
Join Date: Sep 2011
Posts: 10
windows_7chrome
Re: VSFTPD connect problem! help me hurry pls

codersyard
no the are system users!
Reply With Quote
  #4  
Old 30th May 2012, 07:46 PM
codersyard Offline
Registered User
 
Join Date: May 2012
Location: India
Posts: 3
linuxchrome
Re: VSFTPD connect problem! help me hurry pls

Yes it could be true that users are system users. But you need to explicitly add them to /etc/vsftpd/chroot_list. If this doesn't work please check if there is any network related issue(probably router)that is blocking your ftp request from terminal but which may work from another ftp client like Filezilla/WinSCP.
__________________
Coder's Yard - http://www.codersyard.com/ | CY Affiliate - http://www.codersyard.com/dashboard/affiliate
Reply With Quote
Reply

Tags
connect, hurry, pls, problem, vsftpd

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
In a hurry. Wireless problems sespela Servers & Networking 3 18th August 2011 12:59 AM
Can connect to vsftpd server Keldorn Servers & Networking 2 1st June 2008 01:07 PM
Unable to connect to vsftpd?? subarusvx Servers & Networking 16 2nd October 2007 10:35 PM
vsftpd server connect is ok, uploading fails RSD Installation, Upgrades and Live Media 1 22nd August 2006 09:16 PM
VSFTPD Can't connect AlphaTwin Servers & Networking 3 2nd March 2006 05:51 PM


Current GMT-time: 09:17 (Tuesday, 02-09-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat