I buy a Tablet and install wizardpen-0.8.0-5.fc14.i686.rpm (from:http://packages.atrpms.net/dist/f14/....i686.rpm.html)
After that nothing happen...
And then I follow this step:
=========>
As root, install the package using
"yum install --nogpg packagename"
Connect the tablet and run the following command to determine the name of the tablet
cat /sys/bus/usb/devices/*/product
[Ankur1@localhost ~]$ cat /sys/bus/usb/devices/*/product
....
Tablet WP5540U
.....
We look for the event associated with the tablet
cat /proc/bus/input/devices
[Ankur1@localhost ~]$ cat /proc/bus/input/devices
....
...
I: Bus=0003 Vendor=5543 Product=0004 Version=0100
N: Name="UC-LOGIC Tablet WP5540U"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8
U: Uniq=
H: Handlers=mouse2 event8
B: EV=1f
B: KEY=c01 3f0001 0 0 0 0
B: REL=303
B: ABS=100000f
B: MSC=10
Calibrate the tablet using:
wizardpen-calibrate /dev/input/event8
[Ankur1@localhost ~]$ wizardpen-calibrate /dev/input/event8
....
Identifier "WizardPen Tablet"
Option "SendCoreEvents" "true"
Driver "wizardpen"
Option "Device" "/dev/input/event8"
Option "TopX" "1535"
Option "TopY" "3389"
Option "BottomX" "30238"
Option "BottomY" "29348"
Option "MaxX" "30238"
Option "MaxY" "29348"
You now need to add a configuration file for Xorg for the tablet. You can refer to the Fedora Documentation on this. This is what my wizardpen.conf looks like:
Section "InputClass"
Identifier "WizardPen Tablet"
Driver "wizardpen"
MatchProduct "Tablet WP5540U"
MatchVendor "UC-LOGIC"
MatchDevicePath "/dev/input/event*"
Option "TopX" "1535"
Option "TopY" "3389"
Option "BottomX" "30238"
Option "BottomY" "29348"
Option "MaxX" "30238"
Option "MaxY" "29348"
EndSection
The values used in this are the ones that calibration gave us. Place this file in /etc/X11/xorg.conf.d
But it still doesn't work. Is it possible is relative to GNOME3
Buy the way, my friends have a same tablet and use in ubuntu successfully.![]()



Reply With Quote
