WEP encryption not working in F15?

[SagoO]

Hi everyone,

My laptop able to detect wireless. I try to access it with a correct password. However, it keep prompts me the password is wrong. But I was able to connect the wireless using other PC with the same password. I am pretty sure the something wrong with the WEP encryption of the F15. But how to solve it?

Please help!!!

[zachwolfe]

I too have had this same problem, haven't had any luck.

I'm running it on an HP dm4 laptop

lshw -C network:

  *-network               
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: em1
       version: 03
       serial: 64:31:50:6e:ee:11
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:43 ioport:2000(size=256) memory:b0404000-b0404fff memory:b0400000-b0403fff
  *-network
       description: Wireless interface
       product: Centrino Advanced-N + WiMAX 6250
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlan0
       version: 57
       serial: 00:23:15:a0:6b:04
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlagn driverversion=2.6.38.6-27.fc15.x86_64 firmware=41.28.5.1 build 33926 ip=192.168.1.101 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
       resources: irq:42 memory:b2400000-b2401fff
  *-network DISABLED
       description: Ethernet interface
       physical id: 2
       bus info: usb@2:1.3
       logical name: wmx0
       serial: 64:d4:da:1a:c6:c9
       capabilities: ethernet physical
       configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no

dmesg information is here:
http://pastebin.com/M3fvqiw4

Thanks a lot guys!