pptp client sents over vpn, but doesn't receive

ats-tech · #1 26th May 2004, 04:09 AM

Tonight I installed the pptp client from http://pptpclient.sourceforge.net. I've got it all configured and to the point that I can authenticate to our corp MS VPN server. The issue that I have is that I can't seem to get data to flow over this pipe. If I ping a node on the far lan, I can see packets being sent, but nothing appears to be coming back. (yes, the node is alive, you'll just have to trust me on this one). I'm wondering if I have something wrong with routing either in the client or system-config-network.

As a last ditch effort I fired up ethereal, when I do a ping I see ppp traffic from the remote gateway back and forth to myself, which appears to be normal.

I'm tired. Please let me know if I'm being to vague or if you need more info. Any help or suggestions are greatly appreciated.

ats-tech · #2 26th May 2004, 06:10 PM

Anyone have any suggestons on this one?

ats-tech · #3 28th May 2004, 01:14 PM

Definitely seems to be a problem with routing. I had an associate tell me that there are known issues with pptpclient and FC2, but can't find information to verify.

ats-tech · #4 28th May 2004, 01:49 PM

There is now info here:

http://pptpclient.sourceforge.net/ho...a-core-2.phtml

wolveso · #5 28th May 2004, 01:52 PM

There's a bunch of FC2 related messages on the pptpclient-devel mailing list archives..

http://sourceforge.net/mailarchive/f...p?forum_id=773

Unfortunately, it's all Greek to me : ) But it does look like a good place to start.

ats-tech · #6 28th May 2004, 02:09 PM

Much appreciated, that will help out a ton. I see that someone already has an MPPE enabled 2.6.5 kernel .rpm ... Nice. =)

I'll be testing this tonight and will post back with results

ats-tech · #7 28th May 2004, 09:44 PM

http://www.webtastic.com.au/~jba/

I can verify that this kernel works.

andre@home · #8 31st May 2004, 08:59 PM

Quote:

Originally posted by ats-tech
http://www.webtastic.com.au/~jba/

I can verify that this kernel works.

Can you tell what options you have activated in this kernel? thnx.

ats-tech · #9 1st June 2004, 02:06 AM

I don't know what options are set in this kernel, I'd have to take a look through the .config

If you take a look through http://sourceforge.net/mailarchive/f...p?forum_id=773 you shold be able find more info. If I have time later I will compare to the original config.

andre@home · #10 1st June 2004, 07:24 AM

Quote:

Originally posted by ats-tech
I don't know what options are set in this kernel, I'd have to take a look through the .config

If you take a look through http://sourceforge.net/mailarchive/f...p?forum_id=773 you shold be able find more info. If I have time later I will compare to the original config.

No problem. Now I know at least what you did. It saves a lot of work the way you did it...

Succes.