Interlink ePadII won't connect on F12; OK on F11

[lesatwfg]

I use a ePad (signature pad). It works fine with F11 but gets weird message (look like bluetooth????) on F12 and never successfully connects

Also, F12 is on a Dell Precision M4400 where the F11 is on a Lenovo R61.

Does anyone have a clue????

Here's "tail /var/log/messages"

Mar 31 19:30:00 bilbo kernel: usb 6-2: new full speed USB device using uhci_hcd and address 5
Mar 31 19:30:00 bilbo kernel: usb 6-2: New USB device found, idVendor=04df, idProduct=001f
Mar 31 19:30:00 bilbo kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 31 19:30:00 bilbo kernel: usb 6-2: Product: ePadII
Mar 31 19:30:00 bilbo kernel: usb 6-2: Manufacturer: Interlink
Mar 31 19:30:00 bilbo kernel: usb 6-2: configuration #1 chosen from 1 choice
Mar 31 19:30:00 bilbo kernel: generic-usb 0003:04DF:001F.0006: hiddev96,hidraw0: USB HID v1.01 Device [Interlink ePadII] on usb-0000:00:1d.0-2/input0

>>>>> To here all is same as Fedora 11 <<<<<

Mar 31 19:30:03 bilbo kernel: btusb_intr_complete: hci0 urb ffff8800dce97600 failed to resubmit (1)
Mar 31 19:30:03 bilbo kernel: btusb_bulk_complete: hci0 urb ffff8800dce97a80 failed to resubmit (1)
Mar 31 19:30:03 bilbo kernel: btusb_bulk_complete: hci0 urb ffff8800dce97900 failed to resubmit (1)

>>>>> Additional verrrrry interesting <<<
>>>> Just for grins, I plugged in a wireless mouse. Notice that we get the weird
>>>> messages again However, the mouse works where the ePad doesn't

Mar 31 19:31:42 bilbo kernel: usb 6-1: new low speed USB device using uhci_hcd and address 6
Mar 31 19:31:42 bilbo kernel: usb 6-1: New USB device found, idVendor=062a, idProduct=6301
Mar 31 19:31:42 bilbo kernel: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 31 19:31:42 bilbo kernel: usb 6-1: Product: Wireless Mouse
Mar 31 19:31:42 bilbo kernel: usb 6-1: Manufacturer: Mosart
Mar 31 19:31:42 bilbo kernel: usb 6-1: configuration #1 chosen from 1 choice
Mar 31 19:31:42 bilbo kernel: input: Mosart Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input17
Mar 31 19:31:42 bilbo kernel: generic-usb 0003:062A:6301.0007: input,hiddev97,hidraw2: USB HID v1.10 Mouse [Mosart Wireless Mouse] on usb-0000:00:1d.0-1/input0
Mar 31 19:31:45 bilbo kernel: btusb_intr_complete: hci0 urb ffff8800ac3d1900 failed to resubmit (1)
Mar 31 19:31:45 bilbo kernel: btusb_bulk_complete: hci0 urb ffff8800ac3d1d80 failed to resubmit (1)
Mar 31 19:31:45 bilbo kernel: btusb_bulk_complete: hci0 urb ffff8800ac3d1e40 failed to resubmit (1)


So I'm getting the btusb messages after plugging ANY usb device. WHat's up with that?

>>>>>> MORE INFO

Package linuxwacom.x86_64 is not in FC12 but is in FC11 because:

[root@bilbo les]# yum install linuxwacom.x86_64
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package linuxwacom-0.8.2.2-17.fc12.x86_64 is obsoleted by xorg-x11-drv-wacom-0.10.4-2.fc12.x86_64 which is already installed
Nothing to do

Is this the problem?????

How can I tell what module the pad is looking for?