Fedora Linux Support Community & Resources Center
  #1  
Old 10th December 2009, 06:54 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
Fedora 12 driving eight displays

I am attempting to get two nVidia Quadro VMS 450 cards installed on a Fedora 12 system. I have no problem getting one of these cards to drive 4 displays. I run into an issue when I install the second card where no display can be driven from the second card.

an lspci output shows that both cards are detected and have a PCI BUS ID assigned to them, however the nvidia-settings app doesn't pick up the second cards two GPUs. I configured the xorg.conf file to what I think is correct

xorg.conf:

Code:
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"  
    Screen      4  "Screen4" RightOf "Screen3"  
    Screen      5  "Screen5" RightOf "Screen4"  
    Screen      6  "Screen6" RightOf "Screen5"  
    Screen      7  "Screen7" RightOf "Screen6"  
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "hp L1925"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "hp L1925"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor7"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
     Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
    Monitor        "Monitor7"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
But anything from the second card will not display. I confirmed that both video cards are good and ran a single card from each PCI-e slot at a time and both cards and slots work on their own for 4 displays.

I thought that potentially a 650watt power supply may not be sufficient enough to drive 2 of these cards, but the hardware vendor is telling me that it should. I am going to try Fedora Core 8 as well to confirm there isn't an issue with the x server, I've ran into a few other problems with v1.7.1 so far.

Does anyone have any experience running 8 displays between two cards, or even more specifically these Quadro cards.

Thanks,

---------- Post added at 01:54 PM CST ---------- Previous post was at 01:11 PM CST ----------

I tested out Fedora Core 8 and had similar results, but actually found that I can drive displays from the second card when both of the cards are installed at once. It's just that only two GPUs will actually work at once, even if it's between two cards.

For example, card 1's PCI Bus IDs are 98 and 99. Card 2's are 130 and 131.
I can have 4 displays using 98 and 99 and 4 displays using 130 and 131. I also can have 4 displays between the 98 and 130 GPUs, but not 8 displays between all 4 GPUs.

the nvidia-settings tool seems to not pick up all 4 GPUs at once.

Perhaps an nvidia driver/software issue?
Reply With Quote
  #2  
Old 10th December 2009, 06:59 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Have you got enough virtual memory allocated ?

Code:
su -
sed -i '/root=/s|$| vmalloc=256m|' /boot/grub/grub.conf
Quote:


http://us.download.nvidia.com/XFree8...ppendix-l.html

Kernel virtual address space exhaustion on the X86 platform On X86 systems and AMD64/EM64T systems using X86 kernels, only 4GB of virtual address space are available, which the Linux kernel typically partitions such that user processes are allocated 3GB, the kernel itself 1GB. Part of the kernel's share is used to create a direct mapping of system memory (RAM). Depending on how much system memory is installed, the kernel virtual address space remaining for other uses varies in size and may be as small as 128MB, if 1GB of system memory (or more) are installed. By default, the kernel reserves a minimum of 128MB.
The kernel virtual address space still available after the creation of the direct system memory mapping is used by both the kernel and by drivers to map I/O resources, and for some memory allocations. Depending on the number of consumers and their respective requirements, the Linux kernel's virtual address space may be exhausted. Newer Linux kernels print an error message of the form below when this happens:
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
The NVIDIA kernel module requires portions of the kernel's virtual address space for each GPU and for certain memory allocations. If no more than 128MB are available to the kernel and device drivers at boot time, the NVIDIA kernel module may be unable to initialize all GPUs, or fail memory allocations. This is not usually a problem with only 1 or 2 GPUs, however depending on the number of other drivers and their usage patterns, it can be; it is likely to be a problem with 3 or more GPUs.
Possible solutions for this problem include:
If available, the 'vmalloc' kernel parameter can be used to increase the size of the kernel virtual address space reserved by the Linux kernel (the default is 128MB). It is recommended to raise this value in increments to find the best balance between the size of the kernel virtual address space made available and the size of the direct system memory mapping. You can achieve this by passing 'vmalloc=192M', 'vmalloc=256MB', ..., to the kernel and checking if the above error message continues to be printed.
Reply With Quote
  #3  
Old 11th December 2009, 01:53 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
Thanks, that helped. I can now use all 4 gpus. Now I'm running into an issue when X locks up when using two different cards. This happens not only with the Quadro 450, but with an older Quadro FX 1700. Seems like a different issue.
Reply With Quote
  #4  
Old 11th December 2009, 02:15 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Post

Code:
cat /var/log/Xorg.0.log |grep -e EE -e WW
And see if there are any errors.
Reply With Quote
  #5  
Old 11th December 2009, 02:28 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
Hm.... here is the output:

(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loading extension MIT-SCREEN-SAVER
(EE) Dec 11 09:21:37 NVIDIA(1): Unable to find available Display Devices for screen 1.
(WW) Dec 11 09:21:38 NVIDIA(GPU-1): No connected display devices detected; assuming 1 CRT (CRT-0)
(EE) Dec 11 09:21:38 NVIDIA(GPU-1): Failure reading maximum pixel clock value for display device
(EE) Dec 11 09:21:38 NVIDIA(GPU-1): CRT-0.
(EE) Dec 11 09:21:38 NVIDIA(GPU-1): Failed to determine output resource properties.
(WW) Dec 11 09:21:38 NVIDIA(GPU-1): Unable to read EDID for display device CRT-0
(EE) Dec 11 09:21:38 NVIDIA(2): The requested configuration of display devices (CRT-0) in
(EE) Dec 11 09:21:38 NVIDIA(2): MetaMode "DFP-0:nvidia-auto-select+0+0" is not supported
(EE) Dec 11 09:21:38 NVIDIA(2): on this GPU.
(WW) Dec 11 09:21:38 NVIDIA(2):
(WW) Dec 11 09:21:38 NVIDIA(2): Unable to validate any modes; falling back to the default mode
(WW) Dec 11 09:21:38 NVIDIA(2): "nvidia-auto-select".
(WW) Dec 11 09:21:38 NVIDIA(2):
(EE) Dec 11 09:21:38 NVIDIA(2): The requested configuration of display devices (CRT-0) in
(EE) Dec 11 09:21:38 NVIDIA(2): MetaMode "nvidia-auto-select" is not supported on this
(EE) Dec 11 09:21:38 NVIDIA(2): GPU.
(EE) Dec 11 09:21:38 NVIDIA(2): Unable to use default mode "nvidia-auto-select".
(EE) Dec 11 09:21:38 NVIDIA(3): Unable to find available Display Devices for screen 3.
(WW) Dec 11 09:22:14 NVIDIA(0): WAIT (2, 6, 0x8000, 0x00006e3c, 0x00007be4)

If I don't touch the mouse right away after login. I can type and use the arrow keys to move around. All of the displays are up at this point. Then when I start moving the mouse it will freeze after a few seconds of moving it.
Reply With Quote
  #6  
Old 11th December 2009, 02:51 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Ok, these screen numbers look wrong to me



Code:
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"  
    Screen      4  "Screen4" RightOf "Screen3"  
    Screen      5  "Screen5" RightOf "Screen4"  
    Screen      6  "Screen6" RightOf "Screen5"  
    Screen      7  "Screen7" RightOf "Screen6"  
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "hp L1925"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "hp L1925"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor7"
    VendorName     "Unknown"
    ModelName      "NEC LCD1970NX"
    HorizSync       31.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
     Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
    Monitor        "Monitor7"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Shouldn't it be ?

Code:
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:99:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          2
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:98:0:0"
    Screen          3
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          4
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:131:0:0"
    Screen          5
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          6
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 450"
    BusID          "PCI:130:0:0"
    Screen          7
EndSection
Reply With Quote
  #7  
Old 11th December 2009, 03:10 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
I got rid of all of the previous warnings and errors by hardcoding the resolution and refresh rate of each screen. After doing this, there are no errors in the Xorg log:

(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loading extension MIT-SCREEN-SAVER

nothing changes from before the freeze or after the freeze. The screen configuration was done automatically by the nvidia-settings app, so those should be correct.
Reply With Quote
  #8  
Old 11th December 2009, 03:25 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Quote:
Originally Posted by jcook5376 View Post
I got rid of all of the previous warnings and errors by hardcoding the resolution and refresh rate of each screen. After doing this, there are no errors in the Xorg log:

(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loading extension MIT-SCREEN-SAVER

nothing changes from before the freeze or after the freeze. The screen configuration was done automatically by the nvidia-settings app, so those should be correct.
Ok I have noticed that this section is incomplete.


Code:
Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection
Here's some examples



For 32 bit



Code:
Section "Files"
    ModulePath   "/usr/lib/xorg/modules/extensions/nvidia"
    ModulePath   "/usr/lib/xorg/modules/drivers"
    ModulePath   "/usr/lib/xorg/modules"
EndSection

For 64 bit




Code:
Section "Files"
    ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
    ModulePath   "/usr/lib64/xorg/modules/drivers"
    ModulePath   "/usr/lib64/xorg/modules"
EndSection



Is there anything in /var/log/messages ?
Reply With Quote
  #9  
Old 11th December 2009, 06:33 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
The message logs are spammed with the message:
localhost kernel: vgaarb: this pci device is not a vga device

Then Xorg times out and I get a back trace.

Dec 11 13:02:49 localhost kernel: INFO: task Xorg:1461 blocked for more than 120 seconds.
Dec 11 13:02:49 localhost kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 11 13:02:49 localhost kernel: Xorg D ebeca8d8 0 1461 1460 0x00400080
Dec 11 13:02:49 localhost kernel: ebc6df0c 00003086 c08ba44c ebeca8d8 c0a113ac c0a15e40 ebeca8d8 ebc6df0c
Dec 11 13:02:49 localhost kernel: c0a15e40 c0a15e40 c0a15e40 fffdfe45 ebc6df38 00000003 4475d5d2 00000027
Dec 11 13:02:49 localhost kernel: c43ece40 ebeca640 00003246 00003246 ebc6df0c c0450f78 ee992000 00000000
Dec 11 13:02:49 localhost kernel: Call Trace:
Dec 11 13:02:49 localhost kernel: [<c0450f78>] ? add_wait_queue+0x30/0x35
Dec 11 13:02:49 localhost kernel: [<c062f6bc>] vga_get+0xef/0x113
Dec 11 13:02:49 localhost kernel: [<c04396c8>] ? default_wake_function+0x0/0x12
Dec 11 13:02:49 localhost kernel: [<c062f7d1>] vga_arb_write+0xa6/0x3c4
Dec 11 13:02:49 localhost kernel: [<c04c89ee>] ? rw_verify_area+0x9d/0xc0
Dec 11 13:02:49 localhost kernel: [<c062f72b>] ? vga_arb_write+0x0/0x3c4
Dec 11 13:02:49 localhost kernel: [<c04c8dc8>] vfs_write+0x85/0xe4
Dec 11 13:02:49 localhost kernel: [<c04cf4e6>] ? path_put+0x1a/0x1d
Dec 11 13:02:49 localhost kernel: [<c04c8ec5>] sys_write+0x40/0x62
Dec 11 13:02:49 localhost kernel: [<c0408f7b>] sysenter_do_call+0x12/0x28
Dec 11 13:04:49 localhost kernel: INFO: task Xorg:1461 blocked for more than 120 seconds.
Dec 11 13:04:49 localhost kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 11 13:04:49 localhost kernel: Xorg D ebeca8d8 0 1461 1460 0x00400080
Dec 11 13:04:49 localhost kernel: ebc6df0c 00003086 c08ba44c ebeca8d8 c0a113ac c0a15e40 ebeca8d8 ebc6df0c
Dec 11 13:04:49 localhost kernel: c0a15e40 c0a15e40 c0a15e40 fffdfe45 ebc6df38 00000003 4475d5d2 00000027
Dec 11 13:04:49 localhost kernel: c43ece40 ebeca640 00003246 00003246 ebc6df0c c0450f78 ee992000 00000000
Dec 11 13:04:49 localhost kernel: Call Trace:
Dec 11 13:04:49 localhost kernel: [<c0450f78>] ? add_wait_queue+0x30/0x35
Dec 11 13:04:49 localhost kernel: [<c062f6bc>] vga_get+0xef/0x113
Dec 11 13:04:49 localhost kernel: [<c04396c8>] ? default_wake_function+0x0/0x12
Dec 11 13:04:49 localhost kernel: [<c062f7d1>] vga_arb_write+0xa6/0x3c4
Dec 11 13:04:49 localhost kernel: [<c04c89ee>] ? rw_verify_area+0x9d/0xc0
Dec 11 13:04:49 localhost kernel: [<c062f72b>] ? vga_arb_write+0x0/0x3c4
Dec 11 13:04:49 localhost kernel: [<c04c8dc8>] vfs_write+0x85/0xe4
Dec 11 13:04:49 localhost kernel: [<c04cf4e6>] ? path_put+0x1a/0x1d
Dec 11 13:04:49 localhost kernel: [<c04c8ec5>] sys_write+0x40/0x62
Dec 11 13:04:49 localhost kernel: [<c0408f7b>] sysenter_do_call+0x12/0x28
Dec 11 13:06:49 localhost kernel: INFO: task Xorg:1461 blocked for more than 120 seconds.
Dec 11 13:06:49 localhost kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 11 13:06:49 localhost kernel: Xorg D ebeca8d8 0 1461 1460 0x00400080
Dec 11 13:06:49 localhost kernel: ebc6df0c 00003086 c08ba44c ebeca8d8 c0a113ac c0a15e40 ebeca8d8 ebc6df0c
Dec 11 13:06:49 localhost kernel: c0a15e40 c0a15e40 c0a15e40 fffdfe45 ebc6df38 00000003 4475d5d2 00000027
Dec 11 13:06:49 localhost kernel: c43ece40 ebeca640 00003246 00003246 ebc6df0c c0450f78 ee992000 00000000
Dec 11 13:06:49 localhost kernel: Call Trace:
Dec 11 13:06:49 localhost kernel: [<c0450f78>] ? add_wait_queue+0x30/0x35
Dec 11 13:06:49 localhost kernel: [<c062f6bc>] vga_get+0xef/0x113
Dec 11 13:06:49 localhost kernel: [<c04396c8>] ? default_wake_function+0x0/0x12
Dec 11 13:06:49 localhost kernel: [<c062f7d1>] vga_arb_write+0xa6/0x3c4
Dec 11 13:06:49 localhost kernel: [<c04c89ee>] ? rw_verify_area+0x9d/0xc0
Dec 11 13:06:49 localhost kernel: [<c062f72b>] ? vga_arb_write+0x0/0x3c4
Dec 11 13:06:49 localhost kernel: [<c04c8dc8>] vfs_write+0x85/0xe4
Dec 11 13:06:49 localhost kernel: [<c04cf4e6>] ? path_put+0x1a/0x1d
Dec 11 13:06:49 localhost kernel: [<c04c8ec5>] sys_write+0x40/0x62
Dec 11 13:06:49 localhost kernel: [<c0408f7b>] sysenter_do_call+0x12/0x28
Dec 11 13:08:49 localhost kernel: INFO: task Xorg:1461 blocked for more than 120 seconds.
Dec 11 13:08:49 localhost kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 11 13:08:49 localhost kernel: Xorg D ebeca8d8 0 1461 1460 0x00400080
Dec 11 13:08:49 localhost kernel: ebc6df0c 00003086 c08ba44c ebeca8d8 c0a113ac c0a15e40 ebeca8d8 ebc6df0c
Dec 11 13:08:49 localhost kernel: c0a15e40 c0a15e40 c0a15e40 fffdfe45 ebc6df38 00000003 4475d5d2 00000027
Dec 11 13:08:49 localhost kernel: c43ece40 ebeca640 00003246 00003246 ebc6df0c c0450f78 ee992000 00000000
Dec 11 13:08:49 localhost kernel: Call Trace:
Dec 11 13:08:49 localhost kernel: [<c0450f78>] ? add_wait_queue+0x30/0x35
Dec 11 13:08:49 localhost kernel: [<c062f6bc>] vga_get+0xef/0x113
Dec 11 13:08:49 localhost kernel: [<c04396c8>] ? default_wake_function+0x0/0x12
Dec 11 13:08:49 localhost kernel: [<c062f7d1>] vga_arb_write+0xa6/0x3c4
Dec 11 13:08:49 localhost kernel: [<c04c89ee>] ? rw_verify_area+0x9d/0xc0
Dec 11 13:08:49 localhost kernel: [<c062f72b>] ? vga_arb_write+0x0/0x3c4
Dec 11 13:08:49 localhost kernel: [<c04c8dc8>] vfs_write+0x85/0xe4
Dec 11 13:08:49 localhost kernel: [<c04cf4e6>] ? path_put+0x1a/0x1d
Dec 11 13:08:49 localhost kernel: [<c04c8ec5>] sys_write+0x40/0x62
Dec 11 13:08:49 localhost kernel: [<c0408f7b>] sysenter_do_call+0x12/0x28

I noticed the vga_arb_write call. I guess this is a VGA Arbiter. Can this be disabled I wonder?

---------- Post added at 01:33 PM CST ---------- Previous post was at 01:10 PM CST ----------

Went to x.org wiki and found the new features for x server 1.7

# X Input 2.0
# Mandatory XKB
# Support for symbol visibility
# EXA mixed pixmaps
# VGA arbitration

Some sort of conflict?
Reply With Quote
  #10  
Old 11th December 2009, 06:51 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Ok, can you post

Code:
rpm -qa |grep nvidia
Code:
uname -r
and

Code:
lsmod
Reply With Quote
  #11  
Old 11th December 2009, 06:55 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
I didn't install the nVidia driver via rpm, I compiled it so it won't show up in a rpm -qa

uname -r
Code:
2.6.31.5-127.fc12.i686.PAE
lsmod
Code:
Module                  Size  Used by
snd_seq_dummy           2624  0 
sunrpc                158388  1 
ipv6                  239428  37 
cpufreq_ondemand        6160  4 
acpi_cpufreq            8848  0 
dm_multipath           14472  0 
uinput                  6852  0 
nvidia               8866124  110 
snd_hda_codec_realtek   199204  1 
snd_hda_intel          25176  0 
snd_hda_codec          60584  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6900  1 snd_hda_codec
snd_seq                46960  1 snd_seq_dummy
snd_seq_device          6232  2 snd_seq_dummy,snd_seq
snd_pcm                64932  2 snd_hda_intel,snd_hda_codec
snd_timer              17992  2 snd_seq,snd_pcm
snd                    50908  9 snd_seq_dummy,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
iTCO_wdt               10444  0 
i5400_edac              7892  0 
soundcore               5672  1 snd
iTCO_vendor_support     2812  1 iTCO_wdt
edac_core              34820  3 i5400_edac
via_rhine              19848  0 
snd_page_alloc          7892  2 snd_hda_intel,snd_pcm
i5k_amb                 5548  0 
mii                     4120  1 via_rhine
i2c_core               23160  1 nvidia
tg3                    92876  0 
serio_raw               5156  0 
wmi                     5952  0 
floppy                 47700  0
Reply With Quote
  #12  
Old 11th December 2009, 07:03 PM
leigh123linux
Guest
 
Posts: n/a
linuxfedorafirefox
Quote:
Originally Posted by jcook5376 View Post
I didn't install the nVidia driver via rpm, I compiled it so it won't show up in a rpm -qa

uname -r
Code:
2.6.31.5-127.fc12.i686.PAE
lsmod
Code:
Module                  Size  Used by
snd_seq_dummy           2624  0 
sunrpc                158388  1 
ipv6                  239428  37 
cpufreq_ondemand        6160  4 
acpi_cpufreq            8848  0 
dm_multipath           14472  0 
uinput                  6852  0 
nvidia               8866124  110 
snd_hda_codec_realtek   199204  1 
snd_hda_intel          25176  0 
snd_hda_codec          60584  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6900  1 snd_hda_codec
snd_seq                46960  1 snd_seq_dummy
snd_seq_device          6232  2 snd_seq_dummy,snd_seq
snd_pcm                64932  2 snd_hda_intel,snd_hda_codec
snd_timer              17992  2 snd_seq,snd_pcm
snd                    50908  9 snd_seq_dummy,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
iTCO_wdt               10444  0 
i5400_edac              7892  0 
soundcore               5672  1 snd
iTCO_vendor_support     2812  1 iTCO_wdt
edac_core              34820  3 i5400_edac
via_rhine              19848  0 
snd_page_alloc          7892  2 snd_hda_intel,snd_pcm
i5k_amb                 5548  0 
mii                     4120  1 via_rhine
i2c_core               23160  1 nvidia
tg3                    92876  0 
serio_raw               5156  0 
wmi                     5952  0 
floppy                 47700  0

Have you tried a newer kernel?
Reply With Quote
  #13  
Old 11th December 2009, 07:05 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
Yup, tried 2.6.31.6-166 as well.
Reply With Quote
  #14  
Old 14th December 2009, 09:25 PM
wharthog69 Offline
Registered User
 
Join Date: Dec 2009
Posts: 4
linuxfedorafirefox
Anything new? I'm watching this thread, as I appear to have the same problem with 2 FX 570's (2 cards * 2 ports each) and I did install from RPM

rpm -qa |grep nvidia
xorg-x11-drv-nvidia-190.42-5.fc12.i686
nvidia-xconfig-1.0-1.fc12.i686
xorg-x11-drv-nvidia-libs-190.42-5.fc12.i686
kmod-nvidia-PAE-190.42-1.fc12.8.i686
kmod-nvidia-2.6.31.6-166.fc12.i686.PAE-190.42-1.fc12.8.i686
nvidia-settings-1.0-3.2.fc12.i686

uname -r
2.6.31.6-166.fc12.i686.PAE

lsmod

Module Size Used by
fuse 52724 2
ipt_MASQUERADE 2788 1
iptable_nat 6068 1
nf_nat 18008 2 ipt_MASQUERADE,iptable_nat
bridge 43992 0
stp 1988 1 bridge
llc 4960 2 bridge,stp
sunrpc 158388 1
xt_physdev 2064 1
ip6t_REJECT 4620 2
nf_conntrack_ipv6 17548 2
ip6table_filter 3168 1
ip6_tables 11144 1 ip6table_filter
ipv6 239428 38 ip6t_REJECT,nf_conntrack_ipv6
cpufreq_ondemand 6160 8
acpi_cpufreq 8848 0
dm_multipath 14472 0
kvm 140236 0
uinput 6852 0
snd_hda_codec_analog 54684 1
nvidia 8865932 52
snd_hda_intel 25176 2
snd_hda_codec 60584 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6900 1 snd_hda_codec
snd_seq 46960 0
snd_seq_device 6232 1 snd_seq
snd_pcm 64932 2 snd_hda_intel,snd_hda_codec
firewire_ohci 19824 0
firewire_core 39676 1 firewire_ohci
ppdev 8200 0
crc_itu_t 1620 1 firewire_core
iTCO_wdt 10444 0
snd_timer 17992 2 snd_seq,snd_pcm
iTCO_vendor_support 2812 1 iTCO_wdt
parport_pc 22748 0
i5400_edac 7892 0
edac_core 34820 3 i5400_edac
nvidia 8865932 52
snd_hda_intel 25176 2
snd_hda_codec 60584 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6900 1 snd_hda_codec
snd_seq 46960 0
snd_seq_device 6232 1 snd_seq
snd_pcm 64932 2 snd_hda_intel,snd_hda_codec
firewire_ohci 19824 0
firewire_core 39676 1 firewire_ohci
ppdev 8200 0
crc_itu_t 1620 1 firewire_core
iTCO_wdt 10444 0
snd_timer 17992 2 snd_seq,snd_pcm
iTCO_vendor_support 2812 1 iTCO_wdt
parport_pc 22748 0
i5400_edac 7892 0
edac_core 34820 3 i5400_edac
tg3 92876 0
parport 29300 2 ppdev,parport_pc
i2c_i801 10284 0
snd 50908 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,s nd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
i2c_core 23160 2 nvidia,i2c_i801
soundcore 5672 1 snd
snd_page_alloc 7892 2 snd_hda_intel,snd_pcm
i5k_amb 5548 0
dcdbas 8524 0
serio_raw 5156 0
raid456 57988 1
raid6_pq 79120 1 raid456
async_xor 3732 1 raid456
async_memcpy 2428 1 raid456
async_tx 3108 3 raid456,async_xor,async_memcpy
xor 13756 2 raid456,async_xor
mptsas 42624 7
mptscsih 26692 1 mptsas
mptbase 71816 2 mptsas,mptscsih
scsi_transport_sas 22916 1 mptsas

lspci (in case it's useful)

00:00.0 Host bridge: Intel Corporation 5400 Chipset Memory Controller Hub (rev 20)
00:01.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 1 (rev 20)
00:05.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 5 (rev 20)
00:09.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 9 (rev 20)
00:10.0 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
00:10.1 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
00:10.2 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
00:10.3 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
00:10.4 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
00:11.0 Host bridge: Intel Corporation 5400 Chipset CE/SF Registers (rev 20)
00:15.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
00:15.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
00:16.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
00:16.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
00:1b.0 Audio device: Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09)
00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09)
00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09)
00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09)
00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09)
00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09)
00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA AHCI Controller (rev 09)
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 570 (rev a1)
02:00.0 VGA compatible controller: nVidia Corporation Quadro FX 570 (rev a1)
03:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
03:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01)
04:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01)
04:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01)
05:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 21)
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
09:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)


Also, I've tried with and without swiotlb=65536. which was needed by the 64bit RedHat5 that was installed on the machine along with the nVidia drivers when it came from Dell. That combination of drivers, kernel and distribution worked without locking up. The machine has 8gb of memory

Note that it's just the display, the system is still available.

Added attachment for output of nvidia bug-report
Attached Files
File Type: gz nvidia-bug-report.log.gz (32.0 KB, 65 views)

Last edited by wharthog69; 14th December 2009 at 10:15 PM. Reason: updating/adding info
Reply With Quote
  #15  
Old 15th December 2009, 01:51 PM
jcook5376 Offline
Registered User
 
Join Date: Dec 2009
Posts: 9
windows_xp_2003firefox
I filed a bug here:
https://bugs.freedesktop.org/show_bug.cgi?id=25593

If you want to keep track. No updates yet though.
Reply With Quote
Reply

Tags
displays, driving, fedora

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple displays on Fedora 10 lander2k2 Hardware & Laptops 0 23rd December 2008 06:45 AM
Fedora 10 Driving Realtek RT8187B Wireless Almost But No Ping HighClockBitBot Servers & Networking 3 22nd December 2008 01:49 AM
Why Fedora is Driving me nuts. USACOMPUTERTEC Using Fedora 92 10th November 2006 09:12 PM
Fedora Issues Driving Me Nuts!!! telmo Using Fedora 8 28th December 2004 03:48 PM


Current GMT-time: 04:50 (Saturday, 01-11-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat
Eragny Photos on Instagram - Blackburn - North Olmsted Instagram Photos