Network bridge

[Keldorn]

Hi!
I am trying to set up bridge, and everything seems to be ok, except 1 thing, it disappears after reboot.
So, what I am doing:

brctl addbr br0
brctl addif br0 eth0

and adding /etc/sysconfig/network-scripts/ifcfg-br0, here it is:

GATEWAY=192.168.1.1
DEVICE=br0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no

and my ifcfg-eth0 is:

GATEWAY=192.168.1.1
DEVICE=eth0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no

How to make it working after reboot?

[regulatre]

I saw everything but the modprobe.conf stuff in your config snippets. Make sure you're following the guide (there are tons of guides for Fedora nic bonding on the net). Such as this one:

http://techgurulive.com/2008/09/08/h...ing-in-fedora/