bluetooth module not recognized on Dell E6400

[piranhaman]

hello everybody,
I'm using FC11 for longer time and for about last 3 kernel updates I'm not able to use bluetooth module at all. Gnome notification apllet is showing disabled interface, LED is turned on. It worked before perfectly before. After enabling BT, I see it in lsusb:

Bus 005 Device 002: ID 0a5c:5801 Broadcom Corp.

when I enable module I see this in log:

Nov  4 14:02:26 localhost kernel: usb 3-1: new full speed USB device using uhci_hcd and address 20
Nov  4 14:02:26 localhost kernel: usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
Nov  4 14:02:26 localhost kernel: usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov  4 14:02:26 localhost kernel: usb 3-1: Product: BCM2046B1
Nov  4 14:02:26 localhost kernel: usb 3-1: Manufacturer: Broadcom
Nov  4 14:02:26 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice
Nov  4 14:02:26 localhost kernel: hub 3-1:1.0: USB hub found
Nov  4 14:02:26 localhost kernel: hub 3-1:1.0: 3 ports detected
Nov  4 14:02:27 localhost kernel: usb 3-1.1: new full speed USB device using uhci_hcd and address 21
Nov  4 14:02:27 localhost kernel: usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157
Nov  4 14:02:27 localhost kernel: usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov  4 14:02:27 localhost kernel: usb 3-1.1: configuration #1 chosen from 1 choice
Nov  4 14:02:27 localhost kernel: input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input26
Nov  4 14:02:27 localhost kernel: generic-usb 0003:413C:8157.000D: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
Nov  4 14:02:27 localhost kernel: usb 3-1.2: new full speed USB device using uhci_hcd and address 22
Nov  4 14:02:27 localhost kernel: usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158
Nov  4 14:02:27 localhost kernel: usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov  4 14:02:27 localhost kernel: usb 3-1.2: configuration #1 chosen from 1 choice
Nov  4 14:02:27 localhost kernel: input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input27
Nov  4 14:02:27 localhost kernel: generic-usb 0003:413C:8158.000E: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0

hid2hci gives me:

ERROR: Vendor ID, Product ID, and Switching Method must all be defined.

Usage:
	hid2hci [options]

Options:
	-h, --help           Display help
	-q, --quiet          Don't display any messages
	-r, --mode=          Mode to switch to [hid, hci]
	-v, --vendor=        Vendor ID to act upon
	-p, --product=       Product ID to act upon
	-m, --method=        Method to use to switch [csr, logitech, dell]

hcitool scan then returns

Device is not available: No such device

I tried to google what I can but none useful found. My idea is that hardware was not recognized by kernel. Using single boot 2.6.30.9-90.fc11.i686.PAE

thanks for help

[tryatqui]

Thanks for sharing. it's great

[piranhaman]

Originally Posted by tryatqui

Thanks for sharing. it's great

what do you mean with great? it's not great, it's not working.. if anybody can help me, please..

[piranhaman]

working again after auto upgrade to 2.6.30.9-96.fc11.i686.PAE