Fedora Linux Support Community & Resources Center
  #1  
Old 8th January 2009, 09:14 AM
overlord Offline
Registered User
 
Join Date: May 2005
Posts: 69
scsi harddisk not functioning on FC10

Hi all,

I "upgrade" my machine from CentOS5 --> FC10.
I have 3 SCSI drives in a software RAID 5.

Code:
scsi 0:0:9:0: Direct-Access     HITACHI  HUS103014FL3800  SA1B PQ: 0 ANSI: 3
scsi 0:0:10:0: Direct-Access     HITACHI  HUS103014FL3800  SA1B PQ: 0 ANSI: 3
scsi 0:0:13:0: Direct-Access     HITACHI  HUS153014VL3800  S410 PQ: 0 ANSI: 3
...the first 2 drives are ok, but drive 3 - a bit newer, think build date summer 2008 - returns a wrong disksize:

Code:
sd 0:0:13:0: [sdg] READ CAPACITY(16) failed                                                                                                               
sd 0:0:13:0: [sdg] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK                                                                             
sd 0:0:13:0: [sdg] Use 0xffffffff as device size                                                                                                          
sd 0:0:13:0: [sdg] Sector size 0 reported, assuming 512.                                                                                                  
sd 0:0:13:0: [sdg] 4294967296 512-byte hardware sectors (2199023 MB)                                                                                      
sd 0:0:13:0: [sdg] Write Protect is off                                                                                                                   
sd 0:0:13:0: [sdg] Mode Sense: cb 00 10 08                                                                                                                
sd 0:0:13:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA

disk 1 and 2 returns correct size:
Code:
sd 0:0:9:0: [sdc] 287140277 512-byte hardware sectors (147016 MB)
sd 0:0:9:0: [sdc] Write Protect is off
sd 0:0:9:0: [sdc] Mode Sense: c3 00 10 08
sd 0:0:9:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:9:0: [sdc] 287140277 512-byte hardware sectors (147016 MB)
sd 0:0:9:0: [sdc] Write Protect is off
sd 0:0:9:0: [sdc] Mode Sense: c3 00 10 08
sd 0:0:9:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sdc: sdc1
sd 0:0:9:0: [sdc] Attached SCSI disk
how could that be a missing driver....under CentOS5 all was fine?
Any ideas?

thx
Reply With Quote
  #2  
Old 12th January 2009, 10:36 AM
overlord Offline
Registered User
 
Join Date: May 2005
Posts: 69
no idea?....need any further infos?
Reply With Quote
Reply

Tags
fc10, functioning, harddisk, scsi

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FC10 Fresh Install - Hangs on boot (SCSI Hardware RAID 1) intenzity Installation, Upgrades and Live Media 6 19th March 2010 01:40 AM
Mic not functioning pramac1 Hardware & Laptops 7 22nd August 2005 08:31 PM
yum not functioning (FC4T2) powereds Fedora Core 4 Test 10 16th May 2005 03:37 AM
GRUB or LILO boot to SCSI drive in SCSI system w/ IDE card mkl838 Installation, Upgrades and Live Media 0 6th March 2005 06:44 AM


Current GMT-time: 11:21 (Monday, 20-10-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat
Greeneville Instagram Photos - Oak Creek Photos - MSila Photos