hello forum! hope you enjoy my first thread ;-)
on my desktop pc with the following specs, i cannot use hibernate or suspend
asus a7v600-x
amd athlon xp 2400+
nvidia geforce 7600 with driver from livna
2 gb ram
fedora 8
here some more information
Code:
[robin@nutshell ~]$ /sbin/lsmod
Module Size Used by
aes 31489 1
rfcomm 36825 0
l2cap 25537 9 rfcomm
autofs4 20421 2
it87 19789 0
hwmon_vid 6593 1 it87
hwmon 6469 1 it87
sunrpc 140765 1
nf_conntrack_ipv4 11717 3
ipt_REJECT 7617 2
iptable_filter 6465 1
ip_tables 14213 1 iptable_filter
nf_conntrack_ipv6 18769 3
xt_state 6081 6
nf_conntrack 51849 3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
nfnetlink 8281 3 nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack
xt_tcpudp 6977 10
ip6t_ipv6header 6209 2
ip6t_REJECT 8257 2
ip6table_filter 6337 1
ip6_tables 15109 2 ip6t_ipv6header,ip6table_filter
x_tables 14277 7 ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_ipv6header,ip6t_REJECT,ip6_tables
vfat 13249 1
fat 45277 1 vfat
fuse 38485 2
loop 16581 0
dm_multipath 18249 0
ipv6 245989 24 nf_conntrack_ipv6,ip6t_REJECT
snd_via82xx_modem 14409 0
snd_seq_dummy 6725 0
arc4 5953 2
ecb 6721 2
dst 28617 1
blkcipher 9029 1 ecb
snd_via82xx 25177 4
snd_ice1712 55861 1
snd_ice17xx_ak4xxx 7105 1 snd_ice1712
snd_seq_oss 29889 0
snd_ak4xxx_adda 11073 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_seq_midi_event 9793 1 snd_seq_oss
snd_seq 44849 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
dvb_bt8xx 17221 0
snd_cs8427 10817 1 snd_ice1712
rt61pci 24641 0
snd_ac97_codec 92389 3 snd_via82xx_modem,snd_via82xx,snd_ice1712
dvb_core 69481 2 dst,dvb_bt8xx
rt2x00pci 11201 1 rt61pci
snd_usb_audio 75329 1
rt2x00lib 20929 2 rt61pci,rt2x00pci
parport_pc 26981 0
snd_pcm_oss 37569 0
bt878 12665 2 dst,dvb_bt8xx
snd_mixer_oss 16705 3 snd_pcm_oss
parport 32393 1 parport_pc
ac97_bus 6081 1 snd_ac97_codec
ns558 8001 0
rfkill 9297 1 rt2x00lib
snd_i2c 8385 2 snd_ice1712,snd_cs8427
bttv 159797 2 dvb_bt8xx,bt878
gspca 663888 0
video_buf 22469 1 bttv
snd_usb_lib 17345 1 snd_usb_audio
snd_mpu401 11241 0
nvidia 7850240 34
snd_pcm 63685 6 snd_via82xx_modem,snd_via82xx,snd_ice1712,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
snd_hwdep 10309 1 snd_usb_audio
gameport 14665 3 snd_via82xx,ns558
floppy 53125 0
input_polldev 7369 1 rt2x00lib
serio_raw 9029 0
ir_common 33477 1 bttv
hci_usb 16605 2
snd_mpu401_uart 10177 3 snd_via82xx,snd_ice1712,snd_mpu401
bluetooth 49317 7 rfcomm,l2cap,hci_usb
crc_itu_t 6081 1 rt2x00lib
compat_ioctl32 5313 1 bttv
snd_rawmidi 21185 2 snd_usb_lib,snd_mpu401_uart
pcspkr 6593 0
i2c_algo_bit 9157 1 bttv
via_rhine 23753 0
i2c_viapro 11093 0
snd_timer 20549 2 snd_seq,snd_pcm
mac80211 115789 2 rt2x00pci,rt2x00lib
mii 8385 1 via_rhine
btcx_risc 7881 1 bttv
snd_seq_device 10061 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
button 10448 0
snd_page_alloc 11337 3 snd_via82xx_modem,snd_via82xx,snd_pcm
snd 43461 27 snd_via82xx_modem,snd_via82xx,snd_ice1712,snd_seq_oss,snd_ak4xxx_adda,snd_seq,snd_cs8427,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_i2c,snd_mpu401,snd_pcm,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_timer,snd_seq_device
tveeprom 17617 1 bttv
i2c_core 21825 7 dst,dvb_bt8xx,bttv,nvidia,i2c_algo_bit,i2c_viapro,tveeprom
videodev 28097 2 bttv,gspca
cfg80211 10953 1 mac80211
v4l2_common 18625 2 bttv,videodev
soundcore 9633 3 snd
v4l1_compat 15941 2 bttv,videodev
eeprom_93cx6 6081 1 rt61pci
joydev 11649 0
sg 31965 0
sr_mod 17509 0
cdrom 33889 1 sr_mod
usb_storage 73217 0
sata_via 12101 0
dm_snapshot 17765 0
dm_zero 5825 0
dm_mirror 21569 0
dm_mod 46209 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
pata_via 12229 4
ata_generic 8901 0
libata 100145 3 sata_via,pata_via,ata_generic
sd_mod 27329 5
scsi_mod 119757 5 sg,sr_mod,usb_storage,libata,sd_mod
ext3 110665 2
jbd 52457 1 ext3
mbcache 10177 1 ext3
uhci_hcd 23633 0
ohci_hcd 21445 0
ehci_hcd 31821 0
it appears that none of the button, fan, processor etc. modules are loaded. im not sure wheather they are neccessary for non-laptop computers. are they? acpid is running and not showing any errors.
an interesting line from my dmesg is this one
Code:
[robin@nutshell ~]$ dmesg | grep power
powernow-k8: Processor cpuid 681 not supported
strange its trying to load that one since my cpu is a k7 model i suppose.
i do net get any errors in dmesg concerning acpi (in fact, i get no errors).
it is not the problem that i cant boot after hibernatemode but that i cannot enter hibernate. i even dont get the message "suspending consoles" on my screen. it just hangs after shutting down the graphics.
i cannot tell whether the suspendmode is initiated properly, but i cant wake the machine up afterwards (i pressed all buttons i could find being wired with my computer in any way to wake it).
some questions: do i need the acpi_cpufreq module (which i cant load, "...no such device...")?
is it possible i dont have enough swap?
is some component of my hardware causing the problem?
is there anybody out there with my board an cpu and hibernate working?
hope u got some advice,
elevar