 |
 |
 |
 |
| Mac Chat The place to discuss your Fedora/ Mac woes (including ibooks and powerbooks). |

16th March 2008, 04:02 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 11

|
|
|
When installation was complete, it asked me to reboot but it froze and didnt really reboot so I had to turn it off manually. Maybe that was the cause of the problem. I might install it again and try.
You mean after installation, it doesnt take you into the bootloader?
Any ideas where I am going wrong?
|

16th March 2008, 06:21 PM
|
 |
Registered User
|
|
Join Date: Jul 2007
Posts: 449

|
|
|
I believe I had to manually reboot after install, too. That is OK.
Yes, after installing it takes me to the kboot prompt, and after a few moments it proceeds to load Fedora 7 with no interaction from me ... which bootloader did you install? In other words, where did you get your otheros.bld file?
|

16th March 2008, 10:40 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 11

|
|
The bootloader I have is from http://www.kernel.org/pub/linux/ker...ple/geoff/cell/
Then from that webpage I went to the link, [ps3-kboot/] -> [kboot-20071220.bld]
That file is 2.31MB.
Is the bootloader right?
|

17th March 2008, 12:30 AM
|
 |
Registered User
|
|
Join Date: Jul 2007
Posts: 449

|
|
I don't know if that is the same as what is suggested in this guide. See the section labeled "Get the bootloader"? There's a direct link to it.
|

18th March 2008, 09:44 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 11

|
|
|
I tried instaling it al again and works fine. I have the PS3 connected to the router through a patch cable but i cant configure the network, nor can i with wireless. Any tips?
|

18th March 2008, 10:04 PM
|
 |
Registered User
|
|
Join Date: Dec 2007
Location: Fort Collins, Co.
Age: 27
Posts: 404

|
|
|
ok i think that the ps3 is prorpiatary and that you may have to connect to internet using usb or download the kmod madwifi and install it using usb im not sure how to install fc7 succesfully on Ps3 cause i dont have a Ps3. and i dont know much about the ppc version of fc7
__________________
Tuniq 3 case black clear side
Cold Cathode Neon Light Green & Blue
680 Watt -- Power Supply SLI Ready
AMD Phenom X4 9550
AMD Liquid CPU Cooling Fan System Kit
[SLI] Asus M3N72-D Dual PCI-E
4 GB 2x2gig sticks
2x NVIDIA GeForce 9400GT 1GB eVga
320 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]
Logitech X-540 5.1
--------------------------------and
Professional wiring for all cables inside the system tower... LMFAO like i need it
all on Fc9 oh yeah brodah!!!:eek:
|

18th March 2008, 10:44 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 11

|
|
|
Somehow tweaked and got the internet working
|

18th March 2008, 11:12 PM
|
 |
Registered User
|
|
Join Date: Jul 2007
Posts: 449

|
|
Quote:
|
Originally Posted by F.User_4_Life
ok i think that the ps3 is prorpiatary and that you may have to connect to internet using usb or download the kmod madwifi and install it using usb im not sure how to install fc7 succesfully on Ps3 cause i dont have a Ps3. and i dont know much about the ppc version of fc7
|
No... "wired" networking normally works fine for the PS3 "out of the box" on Fedora 7.
For wireless, 64 and 128 Bit WEP are supported. Some users have reported success getting WPA-PSK working as described in this blog post. I haven't see a guide written specifically for Fedora 7 PPC wireless setup on the PS3, but the process is very similar to how it's done with Yellow Dog Linux. See the tutorials from Terrasoft Solutions here:
1. http://www.terrasoftsolutions.com/su...i-config.shtml
2. http://www.terrasoftsolutions.com/su...cryption.shtml
|

19th March 2008, 07:21 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 11

|
|
|
Wireless internet works fine with my PS3 now, now I am just looking for some good applications and software! Any suggestions as of yet?
|

19th March 2008, 11:26 PM
|
 |
Registered User
|
|
Join Date: Dec 2007
Location: Fort Collins, Co.
Age: 27
Posts: 404

|
|
|
what desktop, gnome?
__________________
Tuniq 3 case black clear side
Cold Cathode Neon Light Green & Blue
680 Watt -- Power Supply SLI Ready
AMD Phenom X4 9550
AMD Liquid CPU Cooling Fan System Kit
[SLI] Asus M3N72-D Dual PCI-E
4 GB 2x2gig sticks
2x NVIDIA GeForce 9400GT 1GB eVga
320 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]
Logitech X-540 5.1
--------------------------------and
Professional wiring for all cables inside the system tower... LMFAO like i need it
all on Fc9 oh yeah brodah!!!:eek:
|

19th March 2008, 11:38 PM
|
 |
Registered User
|
|
Join Date: Dec 2007
Location: Fort Collins, Co.
Age: 27
Posts: 404

|
|
ok type this in glxinfo and if it sais you have direct rendering go to this link.
http://forums.fedoraforum.org/forum/...=compiz-fusion
its a link for compiz. use compiz and not beryl cause compiz is more stable.
__________________
Tuniq 3 case black clear side
Cold Cathode Neon Light Green & Blue
680 Watt -- Power Supply SLI Ready
AMD Phenom X4 9550
AMD Liquid CPU Cooling Fan System Kit
[SLI] Asus M3N72-D Dual PCI-E
4 GB 2x2gig sticks
2x NVIDIA GeForce 9400GT 1GB eVga
320 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]
Logitech X-540 5.1
--------------------------------and
Professional wiring for all cables inside the system tower... LMFAO like i need it
all on Fc9 oh yeah brodah!!!:eek:
|

19th March 2008, 11:41 PM
|
 |
Registered User
|
|
Join Date: Dec 2007
Location: Fort Collins, Co.
Age: 27
Posts: 404

|
|
|
and for emerald themes go to gnome-look or kde-look its a .org site. and bolth beryl and compiz themes will install for emerald you just have to click the import buttom and search for the recently downloaded file.
__________________
Tuniq 3 case black clear side
Cold Cathode Neon Light Green & Blue
680 Watt -- Power Supply SLI Ready
AMD Phenom X4 9550
AMD Liquid CPU Cooling Fan System Kit
[SLI] Asus M3N72-D Dual PCI-E
4 GB 2x2gig sticks
2x NVIDIA GeForce 9400GT 1GB eVga
320 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]
Logitech X-540 5.1
--------------------------------and
Professional wiring for all cables inside the system tower... LMFAO like i need it
all on Fc9 oh yeah brodah!!!:eek:
|

20th March 2008, 12:03 AM
|
 |
Registered User
|
|
Join Date: Jul 2007
Posts: 449

|
|
|
@F.User_4_Life - No, we don't have direct rendering on the PS3, so none of that will work.
@Bullwinkle - What sort of applications are you looking for? Have you added the livna and dribble repos as suggested in the guide?
|

20th March 2008, 12:45 AM
|
 |
Registered User
|
|
Join Date: Dec 2007
Location: Fort Collins, Co.
Age: 27
Posts: 404

|
|
|
? ok well im going to leave you guys to it so as for me no more help. have fun ?
__________________
Tuniq 3 case black clear side
Cold Cathode Neon Light Green & Blue
680 Watt -- Power Supply SLI Ready
AMD Phenom X4 9550
AMD Liquid CPU Cooling Fan System Kit
[SLI] Asus M3N72-D Dual PCI-E
4 GB 2x2gig sticks
2x NVIDIA GeForce 9400GT 1GB eVga
320 GB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]
Logitech X-540 5.1
--------------------------------and
Professional wiring for all cables inside the system tower... LMFAO like i need it
all on Fc9 oh yeah brodah!!!:eek:
|

25th March 2008, 04:49 PM
|
|
Registered User
|
|
Join Date: Mar 2008
Posts: 7

|
|
Hi ,
I'm new on linux trying to learn i try few releases f7 ppc but i had problem everytime.
@billb can you give me link f7 ppc, otheros.bld and TRANS.TBL (i don't know do need) for download please...
thank you
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Current GMT-time: 08:50 (Tuesday, 21-05-2013)
|
|
 |
 |
 |
 |
|
|