Network Manager freezes on applying WPA-PSK!

mediator · #1 2008-01-24, 04:24 AM CST

Hi,
I am on fedora 8 and my wifi is secure with WPA-PSK/TKIP security. I searched a lot, but didn't find any solution. So here I am.

The problem is my network manager freezes on applying the psk security. I tried iwconfig method too, but failed. Can anybody shed some light if its a bug or state some working procedure?

mediator · #2 2008-02-01, 08:19 AM CST

bump?.........

nyjetshead · #3 2008-02-01, 01:10 PM CST

Network>Administration >Services
Check to be sure wpa_supplicant is not set to activate on boot.
NM need to have control over wpa_supplicant.

mediator · #4 2008-02-02, 02:58 AM CST

I tried that already! It just freezes. I wanna know if there's some working method or if its a bug in WPA personal! I got my system updated, but it seems it still freezes over it. I tried wpa-pask 2 also. But no use!

bbfuller · #5 2008-02-02, 03:12 AM CST

I have WPA PSK working on three machines without problem.

Although others have problems getting connected I've never heard anyone claim it froze their computers.

Have you tried - or indeed are you able to try - taking WPA off your access point and making a connection then, just as a short term testing measure.

nyjetshead · #6 2008-02-02, 05:08 AM CST

Same goes for me, has worked flawlessly.
Did it ever work? If not start out as bbfuller suggests and try without security and see if it works.
Then start the troubleshooting, you could have a hardware / firmware issue if its hosing the computer.
What wireless chipset do you have?

mediator · #7 2008-02-05, 01:46 AM CST

Yea thats sounds like an option. I'll try without security n post the results. I have wg3111 USb adpator! Any more ideas?

mediator · #8 2008-02-15, 02:16 PM CST

Sorry for taking long, but neways I checked without any security and it still freezes.

It gave a freeze on every boot after removing security. So I had to undo from init 1.

I have WG111v3 Wireless.G USB 2.0 adaptor.

lsusb

Quote:

Bus 001 Device 002: ID 0846:4260 NetGear, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

lspci

Quote:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter

nyjetshead · #9 2008-02-15, 02:24 PM CST

What driver are you using?

mediator · #10 2008-02-15, 02:38 PM CST

ndiswrapper

nyjetshead · #11 2008-02-15, 03:22 PM CST

Code:

Bus 001 Device 002: ID 0846:4260 NetGear, Inc.

This is V3 which uses some variant of P54 chipset.
Try using different driver and see if you can get it working.
I did a quick google and the news is not good regarding your problem.

mediator · #12 2008-02-16, 04:39 AM CST

I know that as I have done extensive googling myself. But I'm still not losing hope. Neways what do u mean by different driver?

nyjetshead · #13 2008-02-16, 05:45 AM CST

A different driver is what you need, the one you have is not getting it done.
I've had similar problem with ndiswrapper and what I did was give up!
I spent too much time on it I should have bought a different device sooner.
If you are looking for a cheap non usb card this one works with madwifi, sell the old one on Ebay

http://www.tigerdirect.com/applicati...706&CatId=2691

$15.00 + shipping for a working fedora wireless card!

mediator · #14 2008-02-16, 09:41 AM CST

Nah, thats not it. I wud prefer trying some more. I read sumwhere that the driver size is big for kernel stack space which might be causing the freeze. So, I will try kernel optimization too. Lets see....

nyjetshead · #15 2008-02-16, 11:54 AM CST

4k stack issue....Here's the bad news...
Everytime you want to update the kernel you have to recompile else your ndiswrapper won't work.
Way too much trouble, my opinion.
You see the posts flood in after the kernel updates " my wireless stopped working after kernel update"
Any way good luck to you, I hope you get it working.