FedoraForum.org - Fedora Support Forums and Community
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
  1. #1
    -=SADKO=- Guest

    Question Disk partitiones not to be recognize :-(

    Hello guys, few days ago i downloaded fedora8 life CD witch KDE.
    It is cool, i like it and wana to instal on hdd but...
    ...but after boot up from CD my HDD mounts as SDA and partitiones not to be recognize :-(
    Last edited by -=SADKO=-; 11th December 2007 at 03:28 PM.

  2. #2
    Join Date
    May 2006
    Posts
    268
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by -=SADKO=-
    Hello guys, few days ago i downloaded fedora8 life CD witch KDE.
    It is cool, i like it and wana to instal on hdd but...
    ...but after boot up from CD my HDD mounts as SDA and partitiones not to be recognize :-(
    /dev/sda is the correct device for your HDD. What are you currently running on HDD? Is it Windows? Do you have previous experience with Linux?

  3. #3
    -=SADKO=- Guest
    Quote Originally Posted by mbratch
    /dev/sda is the correct device for your HDD.
    Correct???
    My experience with Linux and BSD say me about, SDx is memory like devices similar ram or flash rom devices. And my HDD just simple HDD and must be recon as HDA.
    May be i do not correctly undestand some, but in others distros it works. And my logical parts mounts as hda0-1-2-3-4-n

    Now i have on my hdd acronis disk manager, winXP, OSX, and one fat32 part for acssesing from XP and OSX.

  4. #4
    Join Date
    Jun 2006
    Posts
    7,544
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by -=SADKO=-

    Correct???
    My experience with Linux and BSD say me about, SDx is memory like devices similar ram or flash rom devices. And my HDD just simple HDD and must be recon as HDA.
    Hello -=SADKO=-,

    Yes. Correct. Things have changed with Fedora. Since Fedora 7, the IDE drivers use the same libata code as the SATA drivers. All drives are named /dev/sdx in the operating system. GRUB still uses only (hdx).

  5. #5
    -=SADKO=- Guest
    OK thanks, now i understand theat... Storage media have simlinks on my partitions but i can`t acsses to them.
    Gparted see my HDD as SDA but partitiones not to be recognized ;-((
    Fedora installer say that partition table unreadable BUT i do`nt want to lose my data.

  6. #6
    Join Date
    Dec 2004
    Location
    Canada
    Age
    35
    Posts
    9,221
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Can another system (eg Windowsor OSX) recognize the partitions on the drive?
    [+] My open source software and blog
    [+] Some of my howtos: (for full list, click here)

  7. #7
    -=SADKO=- Guest
    Certainly, Rather, Sure!
    Windows and osX correctly works and see partitions what they can see...
    Linux life distros can mount and works with my hdd.

  8. #8
    -=SADKO=- Guest
    What is this?
    Attached Images Attached Images
    Last edited by -=SADKO=-; 9th December 2007 at 07:51 PM.

  9. #9
    Join Date
    May 2006
    Posts
    268
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by -=SADKO=-
    Correct???
    My experience with Linux and BSD say me about, SDx is memory like devices similar ram or flash rom devices. And my HDD just simple HDD and must be recon as HDA.
    May be i do not correctly undestand some, but in others distros it works. And my logical parts mounts as hda0-1-2-3-4-n

    Now i have on my hdd acronis disk manager, winXP, OSX, and one fat32 part for acssesing from XP and OSX.
    If you're using Fedora 8, then yes /dev/sdx is now the hard drive designation. Not the same as older Fedora or BSD.

  10. #10
    Join Date
    May 2006
    Posts
    268
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    OK so you have (probably) an NTFS, a FAT32, and OSX partitions on your hard drive. I would think that at least the FAT32 would be visible from the live CD, but I have not tried that before.

    If you run "mount" at a command prompt, what does the output show?

    As root, you can run "fdisk -l" . This should list the partitions on all your hard drives. Make sure you agree with what you see.

    As root, do an "lsmod" at a command prompt, and "vfat" should be in the list.
    Last edited by mbratch; 9th December 2007 at 07:57 PM.

  11. #11
    -=SADKO=- Guest
    [root@localhost fedora]# mount
    /dev/mapper/livecd-rw on / type ext3 (rw,noatime)
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    devpts on /dev/pts type devpts (rw,gid=5,mode=620)
    tmpfs on /dev/shm type tmpfs (rw)
    none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
    /dev/sr0 on /mnt/live type iso9660 (ro)
    sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
    Last edited by -=SADKO=-; 9th December 2007 at 08:44 PM.

  12. #12
    Join Date
    May 2006
    Posts
    268
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by -=SADKO=-
    What is this?
    Well, it's odd is what it is. There's something about your partition table it doesn't like, clearly.

    Did you try running the Live CD and, LOGGING IN AS 'root', try the "fdisk -l" command?

  13. #13
    -=SADKO=- Guest
    Yes I did, it is: [root@localhost fedora]# fdisk -l

    Disk /dev/sda: 40.0 GB, 40007761920 bytes
    255 heads, 63 sectors/track, 4864 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x156c156b

    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 1467 11783646 7 HPFS/NTFS
    /dev/sda2 1470 2253 6291933+ af Unknown
    Partition 2 does not end on cylinder boundary.
    /dev/sda3 3297 4864 12594960 7 HPFS/NTFS
    /dev/sda4 1468 1470 21517 5 Extended
    Partition 4 does not end on cylinder boundary.
    /dev/sda5 1468 1469 16033+ 14 Hidden FAT16 <32M
    /dev/sda6 2254 3296 8377866 b W95 FAT32

    Partition table entries are not in disk order

    Disk /dev/dm-0: 4294 MB, 4294967296 bytes
    255 heads, 63 sectors/track, 522 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x00000000

    Disk /dev/dm-0 doesn't contain a valid partition table

    Disk /dev/dm-1: 4294 MB, 4294967296 bytes
    255 heads, 63 sectors/track, 522 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x00000000

    Disk /dev/dm-1 doesn't contain a valid partition table


    OS-X stand on my Partition 2 and it is correct.
    "Partition 4" is not partition, this is extended partition mark for windows...

    And What Can I do now?
    Kill OS-X HSF+ partition

  14. #14
    henshaw Guest
    Could this be your problem?

  15. #15
    Join Date
    May 2006
    Posts
    268
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    -=SADKO=-

    I am currently running Fedora 8 on a valid hard drive that also contains a couple of FAT32 partitions, which it sees fine. An "fdisk -l" gives good results with no errors or messages about the partition table being invalid in any way.

    I created a Fedora 8 Live KDE CD from the Fedora 8 site and booted it up this evening. When it booted up, the live CD ran fine. But running "fdisk -l" from a command prompt showed the same results you are getting. It just doesn't like my hard drive now.

    I do happen to be running Gnome on my real install, but that should affect results from "fdisk -l".

    So I will suppose that the Live CD perhaps doesn't have the right modules loaded to view it properly (?).

    For fun I'll try this again with the Gnome version of the live CD.

Page 1 of 2 12 LastLast

Similar Threads

  1. Fedora 9 and NFS mounts
    By jmbnyc in forum Installation, Upgrades and Live Media
    Replies: 1
    Last Post: 29th May 2008, 07:56 AM
  2. nothing mounts on boot nor auto mounts
    By earobinson111 in forum Using Fedora
    Replies: 7
    Last Post: 16th December 2004, 10:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •