FedoraForum.org - Fedora Support Forums and Community
Page 1 of 2 12 LastLast
Results 1 to 15 of 20
  1. #1
    StormChaser Guest

    Fedora 8 and Madwifi Atheros WiFi (It Works)

    I've downloaded the;

    Code:
    madwifi-ng-r2756-20071018
    madwifi-0933.ar2425.20071130.i386.patch
    Then I did

    Code:
    patch -p0 < madwifi-0933.ar2425.20071130.i386.patch
    No Errors

    ...

    Then I followed MadWifi's install list

    Code:
    make
    Code:
    make install
    Code:
    modprobe ath_pci
    I did the requirements in Root as required

    Rebooted the system and BAM I had Wifi listed under iwconfig

    Code:
    system-config-network
    It showed up and I simply went to Network Manager icon and my Wifi AP's were listed.. Connected just fine!

    WOOHOO! I'm running a full stable F8 now with WIFI! Yeeeeeeeeeehaw I have the newer Atheros Chipset that needed the patch. Can't think of the number off hand but I know it's reported wrong.. Believe its actually 5007 Chipset..

  2. #2
    Join Date
    Oct 2007
    Posts
    632
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Can you post exactly which Atheros chipset you have?

    Thanks

  3. #3
    StormChaser Guest
    Atheros AR5007EG

  4. #4
    tchung Guest
    For those of you prefer RPM packages, they are available at:
    http://tchung.fedorapeople.org/madwifi/ar2425/

    It's built on Fedora 8 with the original kernel 2.6.23.1-42.fc8 and It's been tested on Toshiba Satellite A135-S7404 with Atheros AR5007EG built-in wireless (AR2425 Chipset).

    Disclaimer: This is not an official driver from madwifi.org nor fedoraproject.org
    Last edited by tchung; 9th December 2007 at 12:57 PM.

  5. #5
    Join Date
    Jan 2008
    Location
    Marblehead MA USA
    Posts
    296
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    F8 isn't finding wifi0 on booting. The driver is installed. Perhaps the 386 install is simply unable to find it? Using an AMD64 Athlon X2 on a Presario F700. Dang.

  6. #6
    Join Date
    Oct 2006
    Posts
    4,757
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by dhimes
    F8 isn't finding wifi0 on booting. The driver is installed. Perhaps the 386 install is simply unable to find it? Using an AMD64 Athlon X2 on a Presario F700. Dang.
    Didn't work for me either, so you're not alone.

    Using NDISwrapper with the drivers from atheros.cz works great though, at least for me anyways.

  7. #7
    Join Date
    Dec 2004
    Location
    Australia
    Posts
    493
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Dies - how? NDISWRAPPER sh*ts itself if the kernel is compiled with 4k stacks

  8. #8
    Join Date
    Oct 2006
    Posts
    4,757
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by kevmif
    Dies - how? NDISWRAPPER sh*ts itself if the kernel is compiled with 4k stacks
    http://forums.fedoraforum.org/forum/...d.php?t=177516

    See post #7 in that thread.

    OR if you prefer, I hate to even say it, but atrpms has both the kernel and ndiswrapper packages available.

  9. #9
    Join Date
    Jan 2008
    Location
    São Paulo
    Age
    45
    Posts
    31
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have an acer aspire 4520 laptop and i was really close to make my wifi card to work (the same AR5007EG). I did install the acer_acpi and ndiswrapper. The first thing i've got was a kernel panic in thh next boot. Ok, so i've decided to boot with the option

    Code:
    acer_acpi=off
    The system started and the wifi light was blinking in my laptop, i thinked, that's it! The networkmanager was even reporting the active signals... i choosed the one i wanted and set the pswd. Than the system freezed... hard reset and, to my surprise, the same kernel panic again... but this time the acer_acpi=off didn't work...

    (found this in the web http://fedora4520.blogspot.com/ maybe this is my problem after all... does anyone can tell if i have to recompile the kernel to disable this 4k stack to make the wifi work???)

    I'll try the madwifi now. Hope it works...

    Anyway, just wanted to share my experience, I know there's some other guys out there trying to make this card work.

    I'll post the results of my experience with madwifi later.

    ooops... just found http://forums.fedoraforum.org/forum/...d.php?t=177516 (mentioned in the previous post btw ) - i'll give it a try...
    Last edited by christianvl; 21st January 2008 at 01:11 AM. Reason: Ops

  10. #10
    Join Date
    Jan 2008
    Location
    Marblehead MA USA
    Posts
    296
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I'm a total noob @ Linux. I'm installing the x_64 version--maybe it can at least see the device...

  11. #11
    Join Date
    Jan 2008
    Location
    Marblehead MA USA
    Posts
    296
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I keep getting the "no such device" error at
    wlanconfig ath0 create wlandev wifi0 wlanmode sta
    per the instructions at http://madwifi.org/wiki/UserDocs/FirstTimeHowTo
    I was able to connect using this procedure with Debian 4, but I couldn't get anything else to work (including the NVidia card, ethernet etc.).

  12. #12
    Join Date
    Oct 2007
    Posts
    632
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Your first post doesn't state that you are using an Athroes based device I assume this is true.

    Make install is not the way to go with Fedora, use the installation facility (yum)
    I'd uninstall what you have and do the following:

    yum install kmod-madwifi

    echo "blacklist ath5k" >> /etc/modprobe.d/blacklist

    Reboot

    network manager should be installed and will control the interface.

  13. #13
    Join Date
    Jan 2008
    Location
    Marblehead MA USA
    Posts
    296
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cool--thanks. I'll give it a shot (have to undo stuff with ndiswrapper first, though).

  14. #14
    Join Date
    Oct 2007
    Posts
    632
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Forgot you will need to add livna repository...
    At the command line

    rpm -ivh http://rpm.livna.org/livna-release-8.rpm
    rpm --import http://rpm.livna.org/RPM-LIVNA-GPG-KEY

  15. #15
    Join Date
    Jan 2008
    Location
    Marblehead MA USA
    Posts
    296
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thank you. You saved me a lot of trial and error!

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 25
    Last Post: 17th May 2008, 02:01 AM
  2. Fedora 8 Atheros wifi/ D-Link wifi...frustrated
    By Nu-kid in forum Servers & Networking
    Replies: 12
    Last Post: 12th April 2008, 02:02 PM
  3. help for Atheros with madwifi
    By Hades0523 in forum Servers & Networking
    Replies: 1
    Last Post: 19th January 2008, 08:13 PM
  4. wifi probs (sorry) - Fedora 7, Netgear WG311T, madwifi and WPA please..?
    By newbie_dal in forum Installation, Upgrades and Live Media
    Replies: 7
    Last Post: 18th September 2007, 10:44 AM
  5. fc5 / t43p / atheros wifi / madwifi help?
    By holr in forum Hardware
    Replies: 7
    Last Post: 28th April 2006, 03:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •