FedoraForum.org - Fedora Support Forums and Community
Results 1 to 12 of 12
  1. #1
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    TODO:have to rethink extra options

    Greetings,

    I get the title message as an error in KDE when mounting a hard drive on a usb port (/dev/sdb1). The drive mounts fine in Gnome and Xfce (means I can see it, read it, write to it, otherwise have my way with it...). KDE shows a usb icon on the desktop, but immediately issues the "TODO:have to rethink extra options" error when attempting to mount the drive. KDE does not let me see the drive's folders/files, but I can query the "properties" dialog (not that that has made any difference) of the desktop icon.

    It's not that I have to use KDE (I usually use Gnome), but I have not been able to find anything that directs me to what the root cause might be, although it appears that KDE is the culprit. I've been trying to rethink the extra options, but have exhausted those I thought I knew (oh, little do I know). I guess Gnome and Xfce don't concern themselves with rethinking extra options... probably a good idea.

    This same error occurs on my laptop as it does on my desktop; the common theme being I used the same DVD for installation on both. Also, I did an upgrade as opposed to a fresh install. I know, I know I shoulda done the fresh, but I didn't, and other than this anomaly, F8 is working fine. It does appear to be related to the desktop environment, but I had this same disk working in all three environments under F7 (the drive would automount properly).

    So, if you have seen this behavior,and/ or have an idea of what might be occurring, I would appreciate a reply.

    sorry about being verbose...

    -roofer

  2. #2
    Join Date
    Feb 2004
    Location
    45° 57' 9.43" N 86° 14' 39.55" W
    Posts
    731
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I've had a similar problem trying to access the windows partition from KDE on my computer. I believe the problem is rooted somewhere in the console helper app. some permission hasn't bet set properly to allow a user access . I can mount/unmount the the partitions from the root acct. but not my user acct. When I get it sorted out I'll post a solution back here.
    Last edited by Lindy; 15th November 2007 at 09:13 PM.
    Obscurum per obscurius
    -the obscure (explained) by the more obscure.

  3. #3
    Join Date
    Feb 2004
    Location
    45° 57' 9.43" N 86° 14' 39.55" W
    Posts
    731
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    O.K. I have a workaround for the problem I was having. this probably isn't the best solution but it has the advantage of that it actually works, and as far as I know does no harm. What I did was to edit /etc/fstab adding the lines:
    Code:
    /dev/sda1               /mnt/windows            auto    auto,rw,users  0 0
    /dev/sda2               /mnt/windows32          auto    auto,rw,users  0 0
    On rebooting the partitions were automounted and I could access them from KDE. You may be able to do something along similar lines.
    OOPS:I also did mkdir /mnt/<dir name>
    Last edited by Lindy; 15th November 2007 at 10:21 PM.
    Obscurum per obscurius
    -the obscure (explained) by the more obscure.

  4. #4
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Lindy,

    Thanks for responding...

    I didn't mention that the partition I have for my WinXP mounts just fine in KDE. IOW, my fstab works the way it should, and I can access the Windows partition through any file manager/terminal. But I haven't figured out why plugging in a disk drive via a USB gives the "rethink options" error in KDE, but not Gnome. It likely is a minor matter of some permissions or such. Of course, I'll continue to "rethink my extra options" (gotta love that error message) and post any solution I find.

    -roofer

  5. #5
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I'm replying to my own post...

    I have found another forum article that describes the problem I'm having with a suggested solution of turning off the "mount as user" option in the properties dialog. I will certainly try that when I can log into my machine and get the mouse working again. For some reason the USB mouse on my laptop has decided to quit working and no amount of rebooting or unplugging/plugging has made any difference. This mouse worked fine last night. Here's hoping it doesn't affect my desktop...

  6. #6
    silverstreak Guest
    I have the exact same problem. My firewire Maxtor 250GB external hard drive (onetouch) works perfectly in Gnome but not in KDE. I used to get the TODO:.... error message as well. Upon turning off the "mount as user" option, it doesn't even show that a drive has been connected. Has anyone found a solution to this problem?

  7. #7
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    silverstreak,

    I never did find an acceptable solution for my usb drive, other than I switched my laptop to ubuntu. That did fix the problem :-)

    I still run f8 on my desktop, but did not have the mouse problem. I believe I might have had a corrupt f8 installation on my laptop. I can't say I'm completely thrilled with ubuntu (it's okay), but I will likely put f9 on my laptop when it's finally released.

    -roofer

  8. #8
    spoilt Guest
    # yum -y install ntfs-config
    and then run ntfs-config, tick the 'enable write support for external drives' option, go to the advance config and tick your drives.

  9. #9
    silverstreak Guest

    works!

    Actually, turning off the "mount as user" option did work. I just had to restart the machine. Everything works perfectly now!

  10. #10
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    "Solved"

    This thread should be marked as "solved".

    -roofer

  11. #11
    Join Date
    Apr 2004
    Location
    Arkansas
    Age
    68
    Posts
    19
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Automounting File Systems in KDE

    I hope it is OK to post here after the thread has been marked as solved. I hated to open a new thread when this one addressed the issue.

    Gnome is installed as the default desktop system in Fedora 8 and I added KDE. Something about that is probably the reason that Gnome automounts existing file systems, NTFS in my case, and KDE does not. Almost every forum answer for this suggested either adding ntfs-3g (it is included by default in F8), or using fstab. Neither are necessary, as the previous posts here point out.

    As I explored the KDE Home folder (kfmclient openProfile filemanagement) I saw that my existing NTFS file system was recognized by the same names as in Gnome, using Nautilus, but they could not be opened. I see a lot of other people searching for this answer, and I searched a lot yesterday, maybe using too many search words. I stumbled onto the answer on my own, remembering that when I had tried to mount other drives, I received the error, "Only root can do that." So I right-clicked the drive label I wanted to see, went to the Mounting tab, and unchecked the "Mount as user" checkbox. Magically, it worked! That checkbox affected the ability to mount in Konqueror too. I didn't even have to close and reopen the session as I had been doing to try to get it to work. But for people that are trying to access a drive using Konqueror instead of kfmclient, KDE's home icon, that option isn't available.

    A lot of people seem to be looking for the answer to this, and this is one of VERY few threads that offers the solution. I have a predisposition toward Fedora because I was experimenting with Red Hat before Fedora came along. Other users will simply go to Ubuntu because it is easier in this respect. Why can't Fedora compete with Ubuntu in ease of use? Or does Fedora's value for providing cutting-edge software somehow override any value for ease of use? This seems to be an undocumented area. I did search the users guide as well as the forums. I found several threads like this one that never found the solution - http://forums.fedoraforum.org/showth...=kde+automount . Why is it harder in KDE than in Gnome? This issue could be filed under, "Why does Linux have to be so hard?"

    Why does KDE respond like this, and what happens in Linux-speak at a command line or process level when the "Mount as user" checkbox is unchecked? When it is unchecked, the permissions show the same in the terminal as when checked, which is fair, because otherwise, a user would be changing permissions of a directory owned by root.

    Thanks!

    Using HP Pavilion a1700n, AMD 4200+, 2 WD hard drives, (Win$ on sata and Fedora on ide - that was fun in GRUB!), Nvidia chipset and video card.
    Last edited by Wendell; 23rd March 2008 at 10:25 PM.

  12. #12
    Join Date
    Nov 2006
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Talking History repeats...

    I started this thread some time back (March or so). Since then I have installed fedora 10 on a new machine, well, a build I did using some old parts and some new parts.

    Anyways... I got around to installing kde 4.1 (lastest build at present), and ran into the same old "have to rethink my options" problem. Well, obviously, I knew what to do, and that was to do a search in the forums for my previous solution. And, yes, it worked again. So, I helped myself one more time as did all of the good dudes that also responded. So, thanks again.

    Actually, the best option is to do the install of ntfs-config and configure accordingly.

    Well, maybe the best option would be for the kde folks to fix the software to do what Gnome does already. That's just a suggestion as it is a minor pain to have to fix it every time. It's not like ntfs is going away.

    Please do take this as a rant, I just got tickled that I solved my problem a second time with the same thread that solved it the first time... sort of a deja vu thing. Guess you had to be there.

    --roofer

Similar Threads

  1. Mb Todo Sata Raid
    By DanMittonSr in forum Hardware
    Replies: 5
    Last Post: 17th June 2008, 02:41 PM
  2. Replies: 7
    Last Post: 19th March 2008, 09:27 AM
  3. Replies: 5
    Last Post: 10th December 2007, 01:57 PM
  4. Need Help Installing extra options on finishid FC6 installation
    By akvino in forum EOL (End Of Life) Versions
    Replies: 1
    Last Post: 23rd March 2007, 12:44 AM
  5. CD/DVD Creator - extra options?
    By ZeusZon in forum Using Fedora
    Replies: 0
    Last Post: 14th November 2006, 12:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •