asus f3sv laptop & fedora 7 not installing

[fedoradam]

Hi,
I am a new user in forum. I am not goog in English speak. Excuse me...

I bought a new laptop as Asus f3sv. But i cannot fedora 7 on its.
I boot fedora 7 dvd's and I passed grub with enter. Then ;

No driver found:

Unable to find any devicess of the type needed for this installation type. Would you like to manually select your driver or use a driver disk.

At this time, I choose "Use a driver disk" and I choose Asusf3sv.bin on Driver Disk Source. But that is message occured:

There are multiple partitions on this device which could contain the driver disk image. Which you would you like to use?

???


Help...
Thanks.

[dominik1261011]

I had the same problem with my Asus F3SC. I did the following:

1. Put the Fedora 7 image (iso file) on memory stick.
2. Connect the stick to an USB port
3. Run the Fedora 7 setup from your DVD (the same what you are doing now)
3. Then when the installer complains about the drivers, choose one of the options (do not remember it not - it is something like "Use disk" or something similar) and load the iso image from the memory stick by selecting the the deice which is probably sdb1 or sdc1.
4. Then wait a while, The installer should find the Fedora iso image on the memory stick and run the setup.
5. Continue to install your Fedora

[dominik1261011]

Check the following link:

http://forums.fedoraforum.org/forum/...d.php?t=160361

It is related to the problem you are having.

[fedoradam]

Hi,

Unfortunately, I installed that is way. Error messages is:

install exited abnormally [1/1]
...
unmounting filesystems .... disabling /dev/loop6
/proc/bus/usr done
/dev/pts done /sys done
tmp/ramfs done
/tmp/dpart done
you may safely reboot your system..


Thanks.

[brr872002]

If you have fat32 partition under windows copy iso image to hard disk and select source sdaX during install.

burn /images/boot.iso in to cdrom for booting.

[fedoradam]

[


QUOTE=brr872002]If you have fat32 partition under windows copy iso image to hard disk and select source sdaX during install.

burn /images/boot.iso in to cdrom for booting.[/QUOTE]


H,

Unfortunately, The problem didn't solved.

Thanks..

[CameronCross]

i had a similar problem n my ASUS F3SC but once i had gotten it installed i only got terminal function and the user interface didn't start up. I believe it has something to do with Xorg not liking my graphics card but i dont no how to fix it.

Can someone please help me

P.S. Preferably no references to yum as i can't access the internet either.