Fedora Linux Support Community & Resources Center

Home Forums Posting Rules Linux Help Fedora Set-Up Guides Ask Fedora Fedora Project
Go Back   FedoraForum.org > Fedora 17/18 > Using Fedora
Reload this Page Dual Monitors Won't Work After Kernel Update
FedoraForum Search
Forgot Password? Join Us!
Register All Albums FAQ Search Today's Posts Mark Forums Read

Using Fedora General support for current versions. Ask questions about Fedora and it's software that do not belong in any other forum.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 5th May 2007, 10:23 PM
xeonman9000 Offline
Registered User
  
Join Date: Feb 2006
Location: York, England
Age: 25
Posts: 207
Unhappy Dual Monitors Won't Work After Kernel Update
Hello,
I ran an update yesterday, and got a new kernel and kmod-nividia. Then, when I turned my computer on today, I met the "Could not start graphical interface" screen, so I got it to reconfigure X and I got to my desktop thinking I could just recreate my xorg.conf using the nVidia utility. But when I opened it, there were only five checkboxes for various useless options. So I'm stuck with one monitor and hating it, please help.
__________________
http://www.ridethespiral.co.uk/
::Specs::
Intel Core 2 Duo E6400 CPU
Gigabyte GA-965P-DS3
2x1024Mb Patriot DDRII-800MHz RAM
320Gb Seagate Barracuda (SATA)
200Gb Seagate Barracuda
80Gb Seagate Barracuda
NEC SATA DVD-RAM drive
Sony Floppy Drive
X-Pro Card Reader
380-watt Coolermaster eXtreme PSU
BFG 256Mb 7600GT OC graphics card
C-media soundcard
Dual LG L194WT 19" widescreen monitors
Registered Linux User: #423549
Reply With Quote
  #2  
Old 5th May 2007, 10:33 PM
JoshuaWhite Offline
Registered User
  
Join Date: Nov 2006
Location: Herkimer NY
Posts: 59
Manually edit your xorg.conf file.... "/etc/X11/xorg.conf"

If you would like help with that, post a copy of your current config and we'll give you a hand rewriting it.
__________________
-------------------------------------------
HP Pavilion tx2000z Tablet - Dual Core 2.2GHz
Compaq 2596US - Laptop - 2.6GHz
Compaq C300 - Laptop - 1.6 GHz
Compaq 1220 - Laptop - 266 MHz
Compaq LTE/75 - Laptop - 35 MHz
-------------------------------------------
Securemind.Org
Reply With Quote
  #3  
Old 5th May 2007, 10:42 PM
xeonman9000 Offline
Registered User
  
Join Date: Feb 2006
Location: York, England
Age: 25
Posts: 207
Thanks, here's my old xorg.conf:

Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder26)  Fri Dec 15 10:40:57 PST 2006

Section "ServerLayout"
	Identifier     "Layout0"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
	ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "type1"
	Load  "freetype"
	Load  "glx"
	Load  "dbe"
	Load  "extmod"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbLayout" "gb"
	Option	    "XkbModel" "pc105"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Unknown"
	ModelName    "Samsung SyncMaster"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "NVIDIA Corporation"
	BoardName   "GeForce 7600 GT"
	Option	    "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	Option	    "TwinView" "1"
	Option	    "metamodes" "CRT: 1024x768 +1440+132, DFP: 1440x900 +0+0; CRT: 800x600 +1440+0, DFP: nvidia-auto-select +0+0; CRT: 640x480 +1440+0, DFP: nvidia-auto-select +0+0"
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection
__________________
http://www.ridethespiral.co.uk/
::Specs::
Intel Core 2 Duo E6400 CPU
Gigabyte GA-965P-DS3
2x1024Mb Patriot DDRII-800MHz RAM
320Gb Seagate Barracuda (SATA)
200Gb Seagate Barracuda
80Gb Seagate Barracuda
NEC SATA DVD-RAM drive
Sony Floppy Drive
X-Pro Card Reader
380-watt Coolermaster eXtreme PSU
BFG 256Mb 7600GT OC graphics card
C-media soundcard
Dual LG L194WT 19" widescreen monitors
Registered Linux User: #423549
Reply With Quote
  #4  
Old 5th May 2007, 10:53 PM
JoshuaWhite Offline
Registered User
  
Join Date: Nov 2006
Location: Herkimer NY
Posts: 59
can you please post the output of the following command: /sbin/lspci
__________________
-------------------------------------------
HP Pavilion tx2000z Tablet - Dual Core 2.2GHz
Compaq 2596US - Laptop - 2.6GHz
Compaq C300 - Laptop - 1.6 GHz
Compaq 1220 - Laptop - 266 MHz
Compaq LTE/75 - Laptop - 35 MHz
-------------------------------------------
Securemind.Org
Reply With Quote
  #5  
Old 5th May 2007, 10:54 PM
xeonman9000 Offline
Registered User
  
Join Date: Feb 2006
Location: York, England
Age: 25
Posts: 207
Code:
[michael@wi****away ~]$ /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)
__________________
http://www.ridethespiral.co.uk/
::Specs::
Intel Core 2 Duo E6400 CPU
Gigabyte GA-965P-DS3
2x1024Mb Patriot DDRII-800MHz RAM
320Gb Seagate Barracuda (SATA)
200Gb Seagate Barracuda
80Gb Seagate Barracuda
NEC SATA DVD-RAM drive
Sony Floppy Drive
X-Pro Card Reader
380-watt Coolermaster eXtreme PSU
BFG 256Mb 7600GT OC graphics card
C-media soundcard
Dual LG L194WT 19" widescreen monitors
Registered Linux User: #423549
Reply With Quote
  #6  
Old 5th May 2007, 11:03 PM
JoshuaWhite Offline
Registered User
  
Join Date: Nov 2006
Location: Herkimer NY
Posts: 59
Try this:

Code:
#######################################################################
###  Display Server Section ###

Section "ServerFlags"
	Option	    "Xinerama" "0"
EndSection

Section "ServerLayout"
        Identifier     "Multihead layout"
        Screen         "Screen0" LeftOf "Screen1"
        Screen         "Screen1" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option      "Xinerama" "on"
        Option      "Clone" "off"
EndSection

######################################################################
### Modules and Libraries ###

Section "Files"
	ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "type1"
	Load  "freetype"
	Load  "glx"
	Load  "dbe"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbLayout" "gb"
	Option	    "XkbModel" "pc105"
EndSection

######################################################################
### Monitor Setup Section ###

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Unknown"
	ModelName    "Samsung SyncMaster"
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Unknown"
	ModelName    "Samsung SyncMaster"
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

######################################################################
### Video Card Setup Section ###

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "NVIDIA Corporation"
	BoardName   "GeForce 7600 GT"
	Option	    "AddARGBGLXVisuals" "True"
	BusID "PCI:2:0:0"	
	Screen 0
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "nvidia"
	VendorName  "NVIDIA Corporation"
	BoardName   "GeForce 7600 GT"
	Option	    "AddARGBGLXVisuals" "True"
	Screen 0
	BusID "PCI:2:0:0"
EndSection

######################################################################
### Screen Setup Section ###


Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	Option	    "TwinView" "1"
	Option	    "metamodes" "CRT: 1024x768 +1440+132, DFP: 1440x900 +0+0; CRT: 800x600 +1440+0, DFP: nvidia-auto-select +0+0; CRT: 640x480 +1440+0, DFP: nvidia-auto-select +0+0"
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	Option	    "TwinView" "1"
	Option	    "metamodes" "CRT: 1024x768 +1440+132, DFP: 1440x900 +0+0; CRT: 800x600 +1440+0, DFP: nvidia-auto-select +0+0; CRT: 640x480 +1440+0, DFP: nvidia-auto-select +0+0"
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection
__________________
-------------------------------------------
HP Pavilion tx2000z Tablet - Dual Core 2.2GHz
Compaq 2596US - Laptop - 2.6GHz
Compaq C300 - Laptop - 1.6 GHz
Compaq 1220 - Laptop - 266 MHz
Compaq LTE/75 - Laptop - 35 MHz
-------------------------------------------
Securemind.Org
Reply With Quote
  #7  
Old 5th May 2007, 11:28 PM
xeonman9000 Offline
Registered User
  
Join Date: Feb 2006
Location: York, England
Age: 25
Posts: 207
Thanks, but I got the following errors:

Code:
Failed to load NVIDIA kernel module
Aborting
Screen(s) found but non have a useable configuration

Fatal server error:
No screens found
__________________
http://www.ridethespiral.co.uk/
::Specs::
Intel Core 2 Duo E6400 CPU
Gigabyte GA-965P-DS3
2x1024Mb Patriot DDRII-800MHz RAM
320Gb Seagate Barracuda (SATA)
200Gb Seagate Barracuda
80Gb Seagate Barracuda
NEC SATA DVD-RAM drive
Sony Floppy Drive
X-Pro Card Reader
380-watt Coolermaster eXtreme PSU
BFG 256Mb 7600GT OC graphics card
C-media soundcard
Dual LG L194WT 19" widescreen monitors
Registered Linux User: #423549
Reply With Quote
  #8  
Old 6th May 2007, 12:37 AM
JoshuaWhite Offline
Registered User
  
Join Date: Nov 2006
Location: Herkimer NY
Posts: 59
Try this configuration:

Code:
#######################################################################
###  Display Server Section ###

Section "ServerFlags"
	Option	    "Xinerama" "0"
EndSection

Section "ServerLayout"
        Identifier     "Multihead layout"
        Screen         "Screen0" LeftOf "Screen1"
        Screen         "Screen1" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option      "Xinerama" "on"
        Option      "Clone" "off"
EndSection

######################################################################
### Modules and Libraries ###

Section "Files"
	ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "type1"
	Load  "freetype"
	Load  "glx"
	Load  "dbe"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbLayout" "gb"
	Option	    "XkbModel" "pc105"
EndSection

######################################################################
### Monitor Setup Section ###

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Unknown"
	ModelName    "Samsung SyncMaster"
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Unknown"
	ModelName    "Samsung SyncMaster"
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

######################################################################
### Video Card Setup Section ###

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "NVIDIA Corporation"
	BoardName   "GeForce 7600 GT"
	Option	    "AddARGBGLXVisuals" "True"
	BusID "PCI:2:0:0"	
	Screen 0
	Option "TwinView" "True"
	Option "TwinViewOrientation" "RightOf"   
	Option "UseEdidFreqs" "True"
	Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
	Option "UseDisplayDevice" "DFP"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "nvidia"
	VendorName  "NVIDIA Corporation"
	BoardName   "GeForce 7600 GT"
	Option	    "AddARGBGLXVisuals" "True"
	Screen 0
	BusID "PCI:2:0:0"
	Option "TwinView" "True"
	Option "TwinViewOrientation" "RightOf"   
	Option "UseEdidFreqs" "True"
	Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
	Option "UseDisplayDevice" "DFP"
EndSection

######################################################################
### Screen Setup Section ###


Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	Option	    "TwinView" "1"
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection
If it doesn't work then you may have to reload your nvidia drivers.
__________________
-------------------------------------------
HP Pavilion tx2000z Tablet - Dual Core 2.2GHz
Compaq 2596US - Laptop - 2.6GHz
Compaq C300 - Laptop - 1.6 GHz
Compaq 1220 - Laptop - 266 MHz
Compaq LTE/75 - Laptop - 35 MHz
-------------------------------------------
Securemind.Org
Reply With Quote
  #9  
Old 6th May 2007, 01:01 AM
xeonman9000 Offline
Registered User
  
Join Date: Feb 2006
Location: York, England
Age: 25
Posts: 207
Nope, same thing happened.
__________________
http://www.ridethespiral.co.uk/
::Specs::
Intel Core 2 Duo E6400 CPU
Gigabyte GA-965P-DS3
2x1024Mb Patriot DDRII-800MHz RAM
320Gb Seagate Barracuda (SATA)
200Gb Seagate Barracuda
80Gb Seagate Barracuda
NEC SATA DVD-RAM drive
Sony Floppy Drive
X-Pro Card Reader
380-watt Coolermaster eXtreme PSU
BFG 256Mb 7600GT OC graphics card
C-media soundcard
Dual LG L194WT 19" widescreen monitors
Registered Linux User: #423549
Reply With Quote
Reply

Tags
dual, kernel, monitors, update, work

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
monitors.xml and dual monitors NO CLONE bairdc3 Hardware & Laptops 3 5th December 2008 03:35 PM
Trouble Getting Dual Monitors to Work vulcan43 Hardware & Laptops 1 14th November 2006 02:39 PM
Why can't I get dual monitors to work? birdhouse Using Fedora 2 12th April 2005 04:14 AM
Dual Head Display doesn't work after update selvanr Fedora Core 3 Test Releases 0 20th August 2004 05:57 AM


Current GMT-time: 07:26 (Friday, 24-05-2013)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.
Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

 FedoraForum is Powered by RedHat