Fedora Linux Support Community & Resources Center
  #1  
Old 17th January 2007, 11:51 PM
SeaHawkJa Offline
Registered User
 
Join Date: Sep 2005
Location: South Florida
Posts: 10
System Monitor Now Shows only 1 proc

Config:
MSI K8N Neo4 (7125 ver 3.0) BIOS v7.1
AMD Athlon 64 x2 3800+
1GB Kingston DDR 400
Dual WD500 SATA-II
Sony Dual Layer 16X DVD-R/W

Tried FC6 3 times from CDs but kept hanging during checking dependencies.

I have multiple successfull FC4 Servers running prior to this one (different mobos).
Time dictated using FC4 on this unit.
Sucessfully Installed FC4 from CDs.
Yum update yum - went fine.
System Monitor showed Both Processor 1 and Processor 2.

After yum update (took a few tries) - restarted fine.
Everything looked OK. System stable & consistant.

Problem: System Monitor now only shows 1 Processor !!!

Can not google any similar problem.
Any thoughts on that one ???

Any help appreciated.

Thanks,

SeaHawkJa
Reply With Quote
  #2  
Old 18th January 2007, 01:43 AM
mwette Offline
Registered User
 
Join Date: Nov 2005
Location: Los Angeles area
Posts: 887
I have a Dell C521 with AMD X2 3800+ and nforce 430 chipset. I
had this problem. I found that playing with boot arguments helped.
Try booting with "acpi=noirq". Also, post your /var/log/dmesg file
and the output of /proc/interrupts.

To change boot args you can
1) edit /boot/grub/grub.conf
or
2) hit a key during boot to get the grub menu, then type "a" and modify the boot line
Reply With Quote
  #3  
Old 19th January 2007, 02:22 AM
SeaHawkJa Offline
Registered User
 
Join Date: Sep 2005
Location: South Florida
Posts: 10
System Monitor Now Shows only 1 proc

Thanks for the comeback mwette. I will try the grub.conf later tonight.

I forgot to mention that the WD500s are running three RAID1 partitions with /boot, / and swap as you can see.
I have no worries with those as they are all UU and synched.

SeaHAwkJa

Below are dmesg & interrupts outputs:

/var/log/dmesg

Bootdata ok (command line is ro root=/dev/md1 rhgb quiet)
Linux version 2.6.17-1.2142_FC4 (bhcompile@hs20-bc1-6.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Tue Jul 11 22:41:06 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f9250
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9680
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff95c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 257061
DMA zone: 2556 pages, LIFO batch:0
DMA32 zone: 254505 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored. ## Could this be causing it ???
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Checking aperture...
CPU 0: aperture @ 8420000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: ro root=/dev/md1 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2010.345 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1024724k/1048512k available (2272k kernel code, 22868k reserved, 1510k data, 184k init)
Calibrating delay using timer specific routine.. 4023.10 BogoMIPS (lpj=8046202)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Using local APIC timer interrupts.
result 12564674
Detected 12.564 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1294k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: b000-bfff
MEM window: fde00000-fdefffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:0b.0
IO window: a000-afff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: 9000-9fff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Bridge: 0000:00:0d.0
IO window: 8000-8fff
MEM window: fd900000-fd9fffff
PREFETCH window: fd800000-fd8fffff
PCI: Bridge: 0000:00:0e.0
IO window: 7000-7fff
MEM window: fd700000-fd7fffff
PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1169145657.532:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
============================
Part 1 of dmesg
Reply With Quote
  #4  
Old 19th January 2007, 02:27 AM
SeaHawkJa Offline
Registered User
 
Join Date: Sep 2005
Location: South Florida
Posts: 10
Sys Mon 1 proc - ctd

Sorry about that. Output too long had to break dmesg.

Part 2 of dmesg & interrupts
============================
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8962EFD9AF4DD423
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0cie00]
Allocate Port Service[0000:00:0b.0cie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0cie00]
Allocate Port Service[0000:00:0c.0cie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0cie00]
Allocate Port Service[0000:00:0d.0cie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0cie00]
Allocate Port Service[0000:00:0e.0cie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hdaMA, hdbMA
Probing IDE interface ide0...
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 184k freed
Write protecting the kernel read-only data: 927k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 217
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 217
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3c41 87:4163 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113)
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ata2: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3c41 87:4163 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata2: dev 0 configured for UDMA/133
scsi1 : sata_nv
Vendor: ATA Model: WDC WD5000KS-00M Rev: 07.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD5000KS-00M Rev: 07.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
md: raid1 personality registered for level 1
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda2 has different UUID to sdb3
md: sda1 has different UUID to sdb3
md: created md2
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb2 ...
md: adding sdb2 ...
md: sdb1 has different UUID to sdb2
md: adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1169145661.192:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 890 types, 110 bools
security: 55 classes, 244688 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev md1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1169145661.920:3): policy loaded auid=4294967295
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:0a.0 to 64
============================================
Reply With Quote
  #5  
Old 19th January 2007, 02:28 AM
SeaHawkJa Offline
Registered User
 
Join Date: Sep 2005
Location: South Florida
Posts: 10
Part 3 dmesg
========================
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 54743 usecs
intel8x0: clocking to 46922
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 217, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 2-8: new low speed USB device using ohci_hcd and address 2
usb 2-8: configuration #1 chosen from 1 choice
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:02.0-8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
EXT3 FS on md1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev md0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2064248k swap on /dev/md2. Priority:-1 extents:1 across:2064248k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

================================================== ============

cat /proc/interrupts
CPU0
0: 2074107 IO-APIC-edge timer
1: 367 IO-APIC-edge i8042
7: 1 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 55285 IO-APIC-edge i8042
14: 74167 IO-APIC-edge ide0
50: 2 IO-APIC-level ehci_hcd:usb1
217: 92013 IO-APIC-level libata, ohci_hcd:usb2
225: 840589 IO-APIC-level eth0
233: 23 IO-APIC-level NVidia CK804
NMI: 2606
LOC: 2074167
ERR: 0
MIS: 0
Reply With Quote
  #6  
Old 19th January 2007, 03:17 AM
mwette Offline
Registered User
 
Join Date: Nov 2005
Location: Los Angeles area
Posts: 887
SeaHawk,

next time copy dmesg to "dmesg.txt" and post as attachment.
That will make it easier to deal with.

Do you have the SMP version of FC4? If not, you won't get multiple CPUs.
If you want to stick with FC4 I think you need to install the SMP kernel.
I don't know how to do this.

If you are not married to FC4, I'd try to get FC6 running. I have often had
problems with the install hanging. I now usually boot the install with
"linux text ide=nodma". These arg's seem to work reliably for me. Also,
pick the minimal number of packages and add them later. If you get FC6
installed, then you can check /boot/grub/grub.conf and remove the "ide=nodma"
if it is still in the boot args.
Reply With Quote
  #7  
Old 19th January 2007, 05:00 AM
SeaHawkJa Offline
Registered User
 
Join Date: Sep 2005
Location: South Florida
Posts: 10
Sorry about the dmesg - forgot about attaching.

The other FC4 A64x2 servers have not been updated to this kernel and System Monitor shows both Proc1 & proc 2.
This one was updated to 2.6.17-1.2142_FC4 and after the update proc 2 dissapeared.

Not married to FC4 just had it nailed down and working well on both Asus & MSI mobos with SATA-II drives doing RAID1. I actually have one server that has been running 24/7 since October 2005 without any problems. It was only shut down during hurricanes Rita and Wilma because FPL and Bellsouth both had major outages and damage and we did not want any fried UPSs, etc.

I started out to do this one FC6 but after four reinstalls and no luck getting past the hangup I reverted to what I know works without any grief. Also I have a time factor involved as this unit will be running a 20 workstation operation in the next week and a half. You do what you gotta' do.

Anyway thanks for the heads up, I will definately be looking to conquor FC6 once I get this job done.

SeaHawkJa
Reply With Quote
  #8  
Old 19th January 2007, 05:06 AM
mwette Offline
Registered User
 
Join Date: Nov 2005
Location: Los Angeles area
Posts: 887
What you can do if the old kernel is still installed is check the configs
and see if they did something. For example, on my machine I do
Code:
# cd /usr/src/kernels
# diff -c 2.6.18-1.2868.fc6-i686/.config 2.6.18-1.2869.fc6-i686/.config
*** 2.6.18-1.2868.fc6-i686/.config      Fri Dec 15 14:55:31 2006
--- 2.6.18-1.2869.fc6-i686/.config      Wed Dec 20 12:04:46 2006
***************
*** 1,7 ****
  #
  # Automatically generated make config: don't edit
! # Linux kernel version: 2.6.18-1.2868.fc6
! # Fri Dec 15 17:28:21 2006
  #
  CONFIG_X86_32=y
  CONFIG_GENERIC_TIME=y
--- 1,7 ----
  #
  # Automatically generated make config: don't edit
! # Linux kernel version: 2.6.18-1.2869.fc6
! # Wed Dec 20 14:48:30 2006
  #
  CONFIG_X86_32=y
  CONFIG_GENERIC_TIME=y
***************
*** 3148,3153 ****
--- 3148,3157 ----
  CONFIG_JFFS2_RTIME=y
  # CONFIG_JFFS2_RUBIN is not set
  CONFIG_CRAMFS=m
+ CONFIG_SQUASHFS=m
+ # CONFIG_SQUASHFS_EMBEDDED is not set
+ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+ # CONFIG_SQUASHFS_VMALLOC is not set
  CONFIG_VXFS_FS=m
  # CONFIG_HPFS_FS is not set
  CONFIG_QNX4FS_FS=m
[EDIT: This assumes you are getting kernel-build (or kernel-source w/ FC4?).]
Reply With Quote
  #9  
Old 19th January 2007, 05:41 AM
marko Offline
Registered User
 
Join Date: Jun 2004
Location: Laurel, MD USA
Posts: 6,027
The top of your dmesg shows you don't have an SMP kernel:

Code:
Bootdata ok (command line is ro root=/dev/md1 rhgb quiet)
Linux version 2.6.17-1.2142_FC4 (bhcompile@hs20-bc1-6.build.redhat.com)
(gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1
Tue Jul 11 22:41:06 EDT 2006
That chunk of text in the dmesg should have "SMP" in it
in all caps if it's the SMP kernel

Another option might be to get the latest Fedora Re-spin's

respin

they roll in the current patches, it might support your board a
bit better. Note the latest kernels are all SMP capable,
the kernel queries the hardware, turns on the SMP functionality
if the dual core is there, else it just runs in unicore mode.

Mark

Last edited by marko; 19th January 2007 at 05:46 AM.
Reply With Quote
Reply

Tags
monitor, proc, shows

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
gnome-system-monitor shows only my own processes Seehund Using Fedora 9 6th March 2009 10:32 PM
KDE System Guard shows nothing for Disk? Neal Using Fedora 1 23rd March 2007 01:48 AM
/proc/cpuinfo shows wrong Mhz (FC4T3, AMD64) Daemon Fedora Core 4 Test 2 29th May 2005 02:33 PM
gnome-system-monitor only shows one CPU wizard Using Fedora 2 12th June 2004 04:25 AM


Current GMT-time: 17:19 (Saturday, 23-08-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat