FedoraForum.org - Fedora Support Forums and Community
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
  1. #1
    raesene Guest

    Gigabyte 965P-DS3 problems (Mostly Solved)

    I've just finished getting a Core 2 Duo system based on a Gigabyte 965P-DS3 working and I thought I'd post about some problems I had and the solutions in case it'd be helpful.


    - Support for CD/DVD drives. There seems to be a real problem with support for the Parallel ATA controller on this board and most of the distro install programs I tried (Knoppix/Kubuntu/FC5), as soon as it tries to load the driver to start the main install program it can't find it. FC5 is the best of the bunch though in that it gets you far enough to do an install over HTTP.

    So if you've got a second PC with a web server on it, you can copy the files from the DVD onto the web server and use that as an install point

    - SATA drivers. I'm using 2 SATA disks and out of the box (2.6.17-1.2157) the intel SATA drivers don't seem to be well supported. I've used the Gigabyte ones and it made a *significant* difference to the performance of the drives under FC5 (about 10-15 x faster in hdparm -t)

    A couple of other notes, not strictly related to Linux with this board. check the memory voltage you're using, my board defaulted to 1.8V and the memory I was using wanted 1.9V, which seemed to manifest as random crashes of the OS.

    also if you've got the F1 BIOS flashing it might be a good idea as there's quite a few problems with is (including identifying my Core 2 Duo E6600 as a 600Mhz chip!)

    Last one is sound support (which I've not fixed yet). lspci doesn't seem to turn up an audio controller... so any advice on that would be appreciated.

  2. #2
    shonofear Guest
    Quote Originally Posted by raesene
    I've just finished getting a Core 2 Duo system based on a Gigabyte 965P-DS3 working and I thought I'd post about some problems I had and the solutions in case it'd be helpful.


    - Support for CD/DVD drives. There seems to be a real problem with support for the Parallel ATA controller on this board and most of the distro install programs I tried (Knoppix/Kubuntu/FC5), as soon as it tries to load the driver to start the main install program it can't find it. FC5 is the best of the bunch though in that it gets you far enough to do an install over HTTP.

    So if you've got a second PC with a web server on it, you can copy the files from the DVD onto the web server and use that as an install point

    - SATA drivers. I'm using 2 SATA disks and out of the box (2.6.17-1.2157) the intel SATA drivers don't seem to be well supported. I've used the Gigabyte ones and it made a *significant* difference to the performance of the drives under FC5 (about 10-15 x faster in hdparm -t)

    A couple of other notes, not strictly related to Linux with this board. check the memory voltage you're using, my board defaulted to 1.8V and the memory I was using wanted 1.9V, which seemed to manifest as random crashes of the OS.

    also if you've got the F1 BIOS flashing it might be a good idea as there's quite a few problems with is (including identifying my Core 2 Duo E6600 as a 600Mhz chip!)

    Last one is sound support (which I've not fixed yet). lspci doesn't seem to turn up an audio controller... so any advice on that would be appreciated.
    hi,
    i also have tried Linux (SUSE) on my GA-965P-S3 with a E6300...
    also gets to a point where you can install over HTTP...i think anyhow.
    Im using the Intel SATA controllers not the Gigabyte one though.
    I will remember to swap for better performance.

    I also have a few computers that could possibly fo a web server install, however I'm not 2 familiar with that sort of setup.
    Would it be possible to install on another IDE HD from another computer and put it into my new 1..
    But I would rather my new SATA at work.

    ok, will post back soon.

  3. #3
    shonofear Guest

    more info

    ok,
    Ive got further help from elsewhere. I can't state if it works or not but its an alternate option for getting install on a Intel 965 chipset using the ICH8 controller.

    There are some bugs in current kernels with the ICH8 chipset apparently. Two nasty workarounds in the mean time:

    1) add the "all-generic-ide" kernel parameter on boot, or

    2) Set AHCI mode in your bios (no idea if you can do that on your specific board)

    Considering the chipset's proliferating everywhere, I've no doubt that andrew morton will fork the current -mm patches fixing this issue into the next main-line kernel release, so hopefully the problem will go away in a month or so
    I'll try soon to confirm if works or not.

    Or we can wait for new release with proper support for the chipset.

    hope that helps

    c ya

  4. #4
    shonofear Guest
    hey, i emailed Mr Morton and he said this to me...


    Quote:
    Hi,
    > how are ya,
    > Im from Gold COast QLD, and Ive just got my new PC setup.
    > Core 2 conroe E6300 with the Gigabyte GA-965P-S3 motherboard..

    Conroes are nice.

    > My question is.
    > This board uses the 965 chipset (ICH8) and dosent seem to detect my HD (SATA/IDE) and CDrom.

    What kernel?

    > I got a work around from a fella
    >
    >
    > "There are some bugs in current kernels with the ICH8 chipset apparently. Two nasty workarounds in the mean time:
    >
    > 1) add the "all-generic-ide" kernel parameter on boot, or
    >
    > 2) Set AHCI mode in your bios (no idea if you can do that on your specific board)
    >
    > Considering the chipset's proliferating everywhere, I've no doubt that andrew morton will fork the current -mm patches fixing this issue into the next main-line kernel release, so hopefully the problem will go away in a month or so"
    >
    > so will this be fixed with new releases of distros...?
    >

    I think it's fixed in 2.6.18-rc4.



    cheers

  5. #5
    raesene Guest
    well I've managed to sort/work around my last two problems...

    the sounds was a PEBKAC (I'd turned off the Azahlia codec option in the BIOS!)


    To get my CD drives working I ended up converting them to SATA using these http://www.scan.co.uk/Products/Produ...oductID=176415 which worked reasonably well as well...

  6. #6
    jdlundell Guest
    I got my DVD drive to work with this board using the all-generic-ide option. Turns out I needed to reinstall and so I tried using this option to boot the installer and it worked! I was able to install from the FC5 DVD using the command line

    linux install all-generic-ide

    at the prompt which you get after booting from the DVD.

    I have a question, someone mentioned earlier that the SATA drivers from Gigabyte were better. I looked for this on the Gigabyte website and could not find it - any pointers would be appreciated.

    Do like this board, my 6400 is running at 3.2GHz with no overvolting and no heat problems.

  7. #7
    jdlundell Guest
    Another update, I tried 2.6.18-rc4 and it does not even boot, I get a long stack dump and hang. 2.6.18-rc4-mm2 does work though and recognizes my DVD drive on the PATA without the need of the -all-generic-ide kernel option.

  8. #8
    raesene Guest
    on the gigabyte SATA ports. I'm using the standard FC5 2.6.17-1.2157 kernel and the gigabyte ports seem to work well without any additional drivers...

    AFAIK there aren't any additional one's from Gigabyte themselves (at least not that I could find.)

  9. #9
    jlow Guest
    Hi all,

    Could you all tell me if you are getting smooth performance from your machines?

    I've built a Core2 E6300 with the Gigabyte 965P-DS4. Installed FC5 out of the box and then updated everything to latest SMP kernel 2.6.17-1.2174_FC5smp.

    But things happen like mouse freezes temporarily while the system is accessing USB drives when plugged in, and desktop performace is jerky when playing videos or having several large windows open. Sometimes Software Updater just freezes. Generally, it's not running as smooth as it should, it even feels slower than FC5 on my old laptop which is an Athlon 64 3200+.

    I've even booted FC5 with the single 2.6.17-1.2174_FC5 kernel and same jerky performance still there.

    Are your desktops running smoothly and fast?

  10. #10
    raesene Guest
    hi,

    yeah actually I do get a bit of that... the odd stutter in Amarok and the odd mouse hang... not frequently but definately moreso than my previous PC (AMD 64 3000+)

  11. #11
    juanlu Guest
    My FC3 (2.6.12 smp) server over P5B motherboard with two SATA hds could not detect IDE dvd-rw.

    Solution: append de "all-generic-ide" to grub.conf:

    kernel /vmlinuz-2.6.12-1.1381_FC3smp ro root=LABEL=/ all-generic-ide rhgb quiet


    Thank's :-)

  12. #12
    cxlau Guest
    I have also bought a GA-965P-DS3 but have some problem when power up. When I power up the machine, the CPU fan do not run immediately. The fan resume normal after 3-4 seconds. Do you have similar problem on your MB ?

  13. #13
    Sitmex Guest

    Frustrated Instalation.... :(

    Hey ya all!

    Well, to make the story short, I have almost the same system as you guys, the difference is that I have a DG965RY Intel Motherboard with the 965 chipset.

    Several errors were displayed, ACPI (later disabled) and the oddest of all, that the installation needed some drivers for the IDE DVD Burner. which I thought it was odd since it was using it to tell me that I need drivers to use it.

    I decided to go to a local Linux Group here in Guadalajara, but they couldn't help,
    We also try with Mandriva 2007, Ubuntu both 32 & 64 bits, and FC6 32 Bits

    Until somebody noticed that I had a ST processor and I should install an "ia" distribution to solve this problems, so, right now I'm downloading CentOS ia 4.4 Release (64 Bits) to see if I can finally make a clean installation.

    "Do this meanwhile the .19 kernel comes out" he said.

    My System:

    DG695RY Mother Board
    E6600 Core Duo 2 Intel Processor 2.4 Ghz.
    1 GB COrsair DDR2 667Mhz Memory
    250 GB SATA II WD2500JD Drive
    LG DVD Burner (16x)
    LG CD Writter (52x)
    Last edited by Sitmex; 1st November 2006 at 03:15 AM. Reason: Some details missing...

  14. #14
    Join Date
    Jul 2005
    Location
    Melbourne, Australia
    Age
    47
    Posts
    762
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    running 965P-S3 mobo w/ FC6 - noticed that SATA performance is way down compared to windows, also the random crashing issue.

    Aside from the CRASHING AARGH and noticeably slower HDD performance (compared to winblows at least aargh) the 3D desktop etc. is smooth as silk (core 2 E6600 w/ 7950GT )

    Where would I get proper driver for the SATA controllers? (I have 3x HDDs, two on the intel controller, one in the gigabyte controller)

    Also is it true that the livna nvidia drivers are kinda 'beta'? - I"m currenlty attempting to isolate the crash via running a 400Gb rsync in init 3. This way if it doesnt crash I know for sure that its a nvidia issue.
    Last edited by wintermute000; 17th November 2006 at 12:51 AM.
    the phases of 'nix troubleshooting

    For :eek:
    :confused: | google > :D
    Next

  15. #15
    Join Date
    Jul 2005
    Location
    Melbourne, Australia
    Age
    47
    Posts
    762
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Update: during rsyncing, I am noticing a line coming up

    INIT version 2.86 reloadings

    ??????????????????? I am guessing that this is what is causing the crashing, but it doesn't crash in CLI (its still going) just if ur in X?

    Any gurus out there who can shed light? much appreciated

    FYR I'm running core 2 duo, Gigabype 965P-DS3 as above, and Nvidia 7950GT w/ 3x SATA drives
    the phases of 'nix troubleshooting

    For :eek:
    :confused: | google > :D
    Next

Page 1 of 2 12 LastLast

Similar Threads

  1. FC5 on gigabyte GA-965P-S3 not recognized
    By cuban_cigar in forum EOL (End Of Life) Versions
    Replies: 4
    Last Post: 18th May 2007, 09:08 PM
  2. lm-sensors on Gigabyte 965P-S3
    By MrNovi in forum Hardware
    Replies: 3
    Last Post: 8th March 2007, 02:48 AM
  3. ICH8, GA-965P-S3 problem
    By swint144 in forum Hardware
    Replies: 1
    Last Post: 12th January 2007, 02:45 PM
  4. Will the GIGABYTE GA-965P-S3 work with FC6?
    By Linuxboy877 in forum Hardware
    Replies: 0
    Last Post: 30th November 2006, 05:29 AM
  5. Replies: 0
    Last Post: 3rd April 2006, 02:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •