How to install networkprinter Xerox 6125

[drled]

I'm running fedora 17 now for a few days.
Everything works fine, except i can't install my Xerox 6125N...



I allready tried via the Add printer menu, but it can't find my networkprinter.

I can ping the printer:

[ruben@Ruben-Fedora ~]$ ping -c 3 192.168.001.014
PING 192.168.001.014 (192.168.1.12) 56(84) bytes of data.
64 bytes from 192.168.1.12: icmp_req=1 ttl=128 time=13.3 ms
64 bytes from 192.168.1.12: icmp_req=2 ttl=128 time=5.03 ms
64 bytes from 192.168.1.12: icmp_req=3 ttl=128 time=4.17 ms

--- 192.168.001.014 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 4.175/7.531/13.389/4.157 ms
[ruben@Ruben-Fedora ~]$

Also i installed FirewallD via "yum install firewalld" but i still get the message Firewall D is not running ... start services: mdns, ipp, ipp-client en samba-client.

Firewall config:


Thanks in advance

[David Batson]

Have you installed avahi? It should be installed and running for network printer discovery. Even so, it may not discover a Xerox printer (I really don't know). In my case, my Brother network printer was discovered, while my Canon network printer was not. See if the command lpinfo -v returns any useful information. It looks to me that your firewall setup is fine.

Even though my Canon printer was not discovered, I was able to add my Canon printer URI by hand successfully in CUPS: http://localhost:631 . As an example, the URI I am using for my Canon printer is cnijnet:/00-1E-8F-A6-5A-72 . The URI for my Brother printer is dnssd://Brother%20HL-2270DW%20series._pdl-datastream._tcp.local/ .