Fedora Linux Support Community & Resources Center

Go Back   FedoraForum.org > Other Versions > F26 Development Forum
FedoraForum Search

Forgot Password? Join Us!

F26 Development Forum F26 Development Forum Pretty much exactly what it sounds like it is. This is the place to discuss and assist in the community development of F26. WARNING: Any pre-release versions, Beta included, are for experienced testers only. Back up all existing data and read all threads in the version Development Forum before attempting an install. Errors can and will likely occur which may include data destruction or inability to boot other partitions on any and possibly all attached hard drives. While FedoraProject needs and appreciates testers, you must remember to report issues directly to Bugzilla, after checking for pre-existing bugs.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 28th April 2017, 04:42 PM
bobx001 Offline
Registered User
 
Join Date: Dec 2012
Location: santa barbara, CA
Posts: 388
linuxfedorafirefox
Upgrade to FC26 may kill USB3.0

as funny as it may seem, I am now on my fourth box which I had to "reinstall from scratch" FC26,
after doing a fedup from FC25 on all 4, somehow USB3.0 stopped working. i.e. the devices would not even show up.
Plugging them into the USB2.0 (black) ports worked though.

Then after a full reinstall (i.e. wipe clean and start anew), they (the blue USB3.0 ports) now work fine.

funky. I suspect some library conflict somewhere.
Reply With Quote
  #2  
Old 28th April 2017, 05:30 PM
smr54 Online
Registered User
 
Join Date: Jan 2010
Posts: 7,042
linuxchrome
Re: Upgrade to FC26 may kill USB3.0

Fedora 26 is still in alpha, isn't it?
I gave it a try on a UX31E and it just aborted after selecting language.

I don't know how many people aside from the mods pay attention to what section you're using for a post (I suspect most of us just do what I do and look for new posts), but you might want to, for the moment, move the Fedora 26 stuff to the F26 development forum. (or not... like I said, I think few people notice, and these days, the mods don't threaten to ban for posting in the wrong forum, but...)

Anyway, a lot depends upon how much effort you want to put into helping to test. If you're duplicating this on several machines, it may be worth filing the bug.
Reply With Quote
  #3  
Old 28th April 2017, 05:42 PM
antikythera Offline
Administrator
 
Join Date: Dec 2013
Location: United Kingdom
Posts: 4,304
linuxchrome
Re: Upgrade to FC26 may kill USB3.0

as smr54 points out, please keep F26 discussion including any upgrades from earlier versions to the development section of the forum only. thread moved
__________________
Latest survey shows that 3 out of 4 people make up 75% of the world's population - Stephen Hawking
Download, Install and Share Fedora
- Official ISO Torrents
| Live ISO Respins containing post-release updates
Reply With Quote
  #4  
Old 28th April 2017, 06:31 PM
bobx001 Offline
Registered User
 
Join Date: Dec 2012
Location: santa barbara, CA
Posts: 388
linuxfedorafirefox
Re: Upgrade to FC26 may kill USB3.0

OK I will.
Reply With Quote
  #5  
Old 29th April 2017, 04:11 AM
gordon64
Guest
 
Posts: n/a
linuxfirefox
Re: Upgrade to FC26 may kill USB3.0

I have had no luck with F26 boot up so thanks for reporting

looking at usb 3 I think your
Code:
journalctl -b | grep xhci
should show xhci which apparently is the driver for usb 3

and another search shows
Code:
lusb -t
might help too

below is my F25 results
Quote:
NOT OP
journalctl -b | grep xhci
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Apr 29 10:49:24 f.e.org kernel: usb usb3: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Apr 29 10:49:24 f.e.org kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Apr 29 10:49:24 f.e.org kernel: usb usb4: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
Apr 29 10:49:24 f.e.org kernel: usb 3-3: new low-speed USB device number 2 using xhci_hcd
Apr 29 10:49:25 f.e.org kernel: usb 3-4: new low-speed USB device number 3 using xhci_hcd


lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
|__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
offtopic

my tower has 2 front usb ports that are supposed to be usb 3 so that makes them BUS 3// usb 3 and 4 port numbers.

but you can see there is a duplication of port number 4 for reasons I know not.

Port number 4 device number 3 is showing 2 outcomes but both are usb 3 standard
Reply With Quote
  #6  
Old 29th April 2017, 06:40 PM
Kobuck Offline
Registered User
 
Join Date: Feb 2009
Location: Florida
Posts: 502
linuxfedorafirefox
Re: Upgrade to FC26 may kill USB3.0

FWIW:

During the Alpha stage of a release I install to a USB 3.0 WD passport. I do a from scratch net install each time a new release candidate is posted up. I did find that kernel 4.11.0-0.rc7.git0.1.fc26.x86_64 would not boot ( via USB 3) after installation. However, kernel 4.11.0-0.rc8.git0.1.fc26.x86_64 is running just fine.

I do the fresh install just to be sure I am evaluating the actual state of the release vs migration issues between what can be unstable or incomplete content.


(posted from my F26 Alpha evaluation boot )
__________________
Laptop: ASUS K61IC/ Intel T6600 2.20Ghz x2/ 4GB/ 320GB SataII/ NVidia G96M/ fc25.x86_64
Tower: GigaByte (990FXA)/ AMD 1100T 3.3Ghz x6/ 16GB/ 3.75TB Sata III/ AMD 6770HD/ fc25.x86_64
Bookshelf: Shuttle DS61 (H61)/ i3-3225 3.3Ghz x2/ 16GB/ 320GB Sata II/ Intel HD 4000/ fc24.x86_64
Embedded: BeagleBone Blk / ARM AM3358 1 GHz x1/ 512MB/ 2GB eMMC/ PowerVR SGX530/ fc25.armv7hl
Reply With Quote
  #7  
Old 29th April 2017, 06:55 PM
Kobuck Offline
Registered User
 
Join Date: Feb 2009
Location: Florida
Posts: 502
linuxfedorafirefox
Re: Upgrade to FC26 may kill USB3.0

Quote:
offtopic

my tower has 2 front usb ports that are supposed to be usb 3 so that makes them BUS 3// usb 3 and 4 port numbers.

but you can see there is a duplication of port number 4 for reasons I know not.

Port number 4 device number 3 is showing 2 outcomes but both are usb 3 standard
Note that the device is presenting 2 interfaces to the port ( 0 and 1). In my case the device is a Logitech keyboard that has both a keyboard and media control functions ( play, pause, and mute music and videos )
__________________
Laptop: ASUS K61IC/ Intel T6600 2.20Ghz x2/ 4GB/ 320GB SataII/ NVidia G96M/ fc25.x86_64
Tower: GigaByte (990FXA)/ AMD 1100T 3.3Ghz x6/ 16GB/ 3.75TB Sata III/ AMD 6770HD/ fc25.x86_64
Bookshelf: Shuttle DS61 (H61)/ i3-3225 3.3Ghz x2/ 16GB/ 320GB Sata II/ Intel HD 4000/ fc24.x86_64
Embedded: BeagleBone Blk / ARM AM3358 1 GHz x1/ 512MB/ 2GB eMMC/ PowerVR SGX530/ fc25.armv7hl

Last edited by Kobuck; 29th April 2017 at 07:12 PM.
Reply With Quote
Reply

Tags
fc26, kill, upgrade, usb30

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
fedup FC25 -> FC26 not working (yet?) bobx001 F26 Development Forum 3 29th April 2017 11:00 PM
FC26, small issue with FONTS bobx001 F26 Development Forum 1 28th April 2017 01:46 AM
FC26 nice log entry bobx001 F26 Development Forum 4 27th April 2017 07:35 PM
[SOLVED] FC26 - Konqueror under blackbox not showing images bobx001 Desktop Environments / Window Managers 1 27th April 2017 07:07 PM
F20 USB3.0 harddrive not moutable on USB3 port serendip82 Using Fedora 2 21st February 2014 12:19 PM


Current GMT-time: 17:17 (Wednesday, 28-06-2017)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat