I just installed mandvd on my Fedora 15 computer. I did a yum install after adding the sphere repository and after I installed a couple of dependencies.
When I tried to create a dvd it completed the encoding and generated the file menu, but, I get an error while generating menu error and to check the console and finalization of the project is at zero percent.
Can anyone help me with this?
TIA
The console details are below:
--> Output from generation of menu ------------------------------------------------------------
/home/tmort/Videos/Nova//menu.sh: line 5: lame: command not found
dd:
writing `standard output'
: Broken pipe
1421+0 records in
1420+0 records out
5680 bytes (5.7 kB) copied
, 0.0110094 s, 516 kB/s
jpegtopnm: WRITING PPM FILE
INFO: [ppmtoy4m] Command-line Parameters:
INFO: [ppmtoy4m] framerate: 30000:1001
INFO: [ppmtoy4m] pixel aspect ratio: 10:11
INFO: [ppmtoy4m] pixel packing: RGB
INFO: [ppmtoy4m] interlace: top-field-first (interleaved PPM input)
INFO: [ppmtoy4m] starting frame: 0
INFO: [ppmtoy4m] # of frames: 1, or until input exhausted
INFO: [ppmtoy4m] chroma subsampling: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM!
INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION!
INFO: [ppmtoy4m] Output Stream parameters:
INFO: [ppmtoy4m] frame size: 720x480 pixels (518400 bytes)
INFO: [ppmtoy4m] chroma: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [ppmtoy4m] frame rate: 30000/1001 fps (~29.970030)
INFO: [ppmtoy4m] interlace: top-field-first
INFO: [ppmtoy4m] sample aspect ratio: 10:11
INFO: [mpeg2enc] Selecting DVD with dummy navigation packets output profile
INFO: [mpeg2enc] Interlaced input - selecting interlaced encoding.
INFO: [mpeg2enc] Encoding MPEG-2 video to genmenu.m2v
INFO: [mpeg2enc] Horizontal size: 720 pel
INFO: [mpeg2enc] Vertical size: 480 pel
INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc] Frame rate code: 4 = 30000.0/1001.0 (NTSC VIDEO)
INFO: [mpeg2enc] Bitrate: 7500 KBit/s
INFO: [mpeg2enc] Quality factor: 8 (Quantisation = 9) (1=best, 31=worst)
INFO: [mpeg2enc] Field order for input: top-field-first
INFO: [mpeg2enc] Sequence unlimited length
INFO: [mpeg2enc] Search radius: 16
INFO: [mpeg2enc] DualPrime: no
INFO: [mpeg2enc] Using one-pass rate controller
INFO: [mpeg2enc] GOP SIZE RANGE 9 TO 18
INFO: [mpeg2enc] Setting colour/gamma parameters to "NTSC"
INFO: [mpeg2enc] Progressive format frames = 0
INFO: [mpeg2enc] Using default unmodified quantization matrices
INFO: [mpeg2enc] SETTING MMX and MMX for QUANTIZER!
INFO: [mpeg2enc] NEW GOP INIT length 18
INFO: [mpeg2enc] Signaling last frame = 0
INFO: [mpeg2enc] Enc1 0 0( 0) I q=9.03 [100% Intra]
INFO: [mpeg2enc] Sequence end reached
INFO: [mpeg2enc] Pass2 0 0( 0) I q=9.00 RECODED
INFO: [mpeg2enc] Guesstimated final muxed size = 17671
INFO: [mplex] mplex version 1.9.0 (2.2.7 $Date: 2006/02/01 22:23:01 $)
**ERROR: [mplex] Unable to open file silent.mpa for reading.
DVDAuthor::spumux, version 0.7.0.
Build options: gnugetopt graphicsmagick iconv freetype fribidi fontconfig
Send bug reports to <dvdauthor-users@lists.sourceforge.net>
INFO: default video format is NTSC
STAT:
0:00:00.000
INFO: Picture survolee.png had 5 colors
INFO: Picture cliquee.png had 5 colors
INFO: Constructing blank img
INFO: Pickbuttongroups, success with 1 groups, useimg=1
INFO: 0 subtitles added, 0 subtitles skipped, stream: 32, offset: -0.00
Linear Mode
