Fedora Linux Support Community & Resources Center
  #1  
Old 21st December 2011, 05:44 AM
tmort Offline
Registered User
 
Join Date: Feb 2006
Posts: 284
linuxchrome
ManDVD 2.6

I just installed mandvd on my Fedora 15 computer. I did a yum install after adding the sphere repository and after I installed a couple of dependencies.
When I tried to create a dvd it completed the encoding and generated the file menu, but, I get an error while generating menu error and to check the console and finalization of the project is at zero percent.

Can anyone help me with this?

TIA

The console details are below:

--> Output from generation of menu ------------------------------------------------------------
/home/tmort/Videos/Nova//menu.sh: line 5: lame: command not found
dd:
writing `standard output'
: Broken pipe

1421+0 records in
1420+0 records out
5680 bytes (5.7 kB) copied
, 0.0110094 s, 516 kB/s
jpegtopnm: WRITING PPM FILE
INFO: [ppmtoy4m] Command-line Parameters:
INFO: [ppmtoy4m] framerate: 30000:1001
INFO: [ppmtoy4m] pixel aspect ratio: 10:11
INFO: [ppmtoy4m] pixel packing: RGB
INFO: [ppmtoy4m] interlace: top-field-first (interleaved PPM input)
INFO: [ppmtoy4m] starting frame: 0
INFO: [ppmtoy4m] # of frames: 1, or until input exhausted
INFO: [ppmtoy4m] chroma subsampling: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM!
INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION!
INFO: [ppmtoy4m] Output Stream parameters:
INFO: [ppmtoy4m] frame size: 720x480 pixels (518400 bytes)
INFO: [ppmtoy4m] chroma: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [ppmtoy4m] frame rate: 30000/1001 fps (~29.970030)
INFO: [ppmtoy4m] interlace: top-field-first
INFO: [ppmtoy4m] sample aspect ratio: 10:11
INFO: [mpeg2enc] Selecting DVD with dummy navigation packets output profile
INFO: [mpeg2enc] Interlaced input - selecting interlaced encoding.
INFO: [mpeg2enc] Encoding MPEG-2 video to genmenu.m2v
INFO: [mpeg2enc] Horizontal size: 720 pel
INFO: [mpeg2enc] Vertical size: 480 pel
INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc] Frame rate code: 4 = 30000.0/1001.0 (NTSC VIDEO)
INFO: [mpeg2enc] Bitrate: 7500 KBit/s
INFO: [mpeg2enc] Quality factor: 8 (Quantisation = 9) (1=best, 31=worst)
INFO: [mpeg2enc] Field order for input: top-field-first
INFO: [mpeg2enc] Sequence unlimited length
INFO: [mpeg2enc] Search radius: 16
INFO: [mpeg2enc] DualPrime: no
INFO: [mpeg2enc] Using one-pass rate controller
INFO: [mpeg2enc] GOP SIZE RANGE 9 TO 18
INFO: [mpeg2enc] Setting colour/gamma parameters to "NTSC"
INFO: [mpeg2enc] Progressive format frames = 0
INFO: [mpeg2enc] Using default unmodified quantization matrices
INFO: [mpeg2enc] SETTING MMX and MMX for QUANTIZER!
INFO: [mpeg2enc] NEW GOP INIT length 18
INFO: [mpeg2enc] Signaling last frame = 0
INFO: [mpeg2enc] Enc1 0 0( 0) I q=9.03 [100% Intra]
INFO: [mpeg2enc] Sequence end reached
INFO: [mpeg2enc] Pass2 0 0( 0) I q=9.00 RECODED
INFO: [mpeg2enc] Guesstimated final muxed size = 17671

INFO: [mplex] mplex version 1.9.0 (2.2.7 $Date: 2006/02/01 22:23:01 $)
**ERROR: [mplex] Unable to open file silent.mpa for reading.
DVDAuthor::spumux, version 0.7.0.
Build options: gnugetopt graphicsmagick iconv freetype fribidi fontconfig
Send bug reports to <dvdauthor-users@lists.sourceforge.net>

INFO: default video format is NTSC
STAT:
0:00:00.000
INFO: Picture survolee.png had 5 colors
INFO: Picture cliquee.png had 5 colors
INFO: Constructing blank img
INFO: Pickbuttongroups, success with 1 groups, useimg=1
INFO: 0 subtitles added, 0 subtitles skipped, stream: 32, offset: -0.00
Reply With Quote
  #2  
Old 21st December 2011, 09:17 AM
Dangermouse Offline
Administrator - (On Leave)
 
Join Date: Aug 2007
Location: London Postbox (the red one)
Age: 48
Posts: 3,864
linuxfirefox
Re: ManDVD 2.6

Just been trying it myself http://pkgs.org/fedora-15/rpm-sphere...86_64.rpm.html

personally I would not bother trying to get it to run again, have you tried/used devede

Quote:
yum install devede
Reply With Quote
  #3  
Old 21st December 2011, 04:01 PM
VernDog Offline
Registered User
 
Join Date: Aug 2009
Posts: 313
linuxchrome
Re: ManDVD 2.6

I would agree on using devede. Its still currently being developed where it looks like mandvd has stopped. At Sourceforge, the last update was over two years ago.
Reply With Quote
  #4  
Old 23rd December 2011, 09:57 PM
tmort Offline
Registered User
 
Join Date: Feb 2006
Posts: 284
linuxchrome
Re: ManDVD 2.6

I'm using mandvd and it works well except for one thing that has me scratching my head.

After I used it to burn one dvd and then delete all the source files and the ISO image that it created and I go to make another DVD from other source files I get a message saying the 8000 MB are needed and only 2500 are available.

I checked my disk usage and I have about 120 GB unused.

Any ideas?
Reply With Quote
Reply

Tags
mandvd

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ManDVD fakie_flip Using Fedora 8 26th December 2009 02:16 AM
ManDVD JaRaEeZ Using Fedora 2 27th August 2006 11:29 PM


Current GMT-time: 11:43 (Tuesday, 02-09-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat