Fedora Linux Support Community & Resources Center

Home Forums Posting Rules Linux Help Fedora Set-Up Guides Ask Fedora Fedora Project
Go Back   FedoraForum.org > Fedora 17/18 > Using Fedora
Reload this Page help with twin view
FedoraForum Search
Forgot Password? Join Us!
Register All Albums FAQ Search Today's Posts Mark Forums Read

Using Fedora General support for current versions. Ask questions about Fedora and it's software that do not belong in any other forum.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 4th September 2006, 07:10 PM
4saken Offline
Registered User
  
Join Date: Sep 2006
Posts: 4
help with twin view
I am very new to Linux but I have figured a few things out. I got the nvidia driver installed and I can see the settings in the Nvidia display settings.

I tryed turning dual head on and entering my 2nd monitors type but once x server restarts I get the error saying it cant be restarted. It goes from the nvidia logo screen back to an error (NVRM Xid (001:00) 1, Channel 00000000 Method 00000000 Data 01014700) five times and then locks up.

Once I restore the defaults and get back into linux the settings in the nvidia display settings dissapear and I have to reinstall them(im sure theres a better way then reinstalling them, like enabling something somewhere but I don't know how). So I dont think dual head is what I need to use (or i'm doing it wrong). So I searched around the forum some more and saw posts about twin view instead.

What do I need to do to get this working
Below is the uname output and my current xorg.conf information.

uname -r
Code:
2.6.17-1.2174_FC5
xorg.conf
Code:
Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
Code:
Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Dell P990"
	DisplaySize  370	270
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 96.0
	VertRefresh  48.0 - 120.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "nVidia Corporation nv40 [GeForce 6800 Ultra]"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024"
	EndSubSection
EndSection
Reply With Quote
  #2  
Old 4th September 2006, 07:42 PM
b_martinez Offline
Registered User
  
Join Date: Apr 2005
Location: Pueblo,Colorado
Posts: 724
Here's my config file. Check it out, it may help you to configure yours.


# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib64/xorg/modules"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "type1"
Load "glx"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 173V/172V/173S/173B/174V/175V"
DisplaySize 340 270
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x]"
Option "TwinView" "on"
Option "MetaModes" "1024x768,1024x768"
Option "RenderAccel" "true"
Option "NVAGP" "3"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

hth
Bill
__________________
Registered Linux User : 361761 Registered Machine (2nd time): 332471
Work is for people who don't know how to fish.......;)
Sometimes the obvious is so well hidden that it boggles the mind.
Reply With Quote
  #3  
Old 4th September 2006, 08:06 PM
4saken Offline
Registered User
  
Join Date: Sep 2006
Posts: 4
Thanks alot.

I got it working after I copied these settings in

Option "TwinView" "on"
Option "MetaModes" "1024x768,1024x768"
Option "RenderAccel" "true"
Option "NVAGP" "3"
Option "Xinerama" "on"
Option "Clone" "off"


SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Reply With Quote
  #4  
Old 4th September 2006, 08:13 PM
b_martinez Offline
Registered User
  
Join Date: Apr 2005
Location: Pueblo,Colorado
Posts: 724
You may NOT need to have the line
Option "Xinerama" "on"
in fact, it may help to comment it out.
And you are welcome . Glad I could help.
Bill
__________________
Registered Linux User : 361761 Registered Machine (2nd time): 332471
Work is for people who don't know how to fish.......;)
Sometimes the obvious is so well hidden that it boggles the mind.
Reply With Quote
Reply

Tags
twin, view

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
KDE 4 and twin view. detz Using Fedora 1 3rd June 2008 08:23 PM
twin view doesnt work liliane_sm Using Fedora 1 2nd September 2007 04:09 AM
help with twin view ThaRealest Using Fedora 2 31st August 2005 11:10 PM
Duplicate Wallpaper in Twin View fredmt Using Fedora 0 26th August 2005 01:20 AM
nvidia twin view xorg.conf example or yanc help rosschilen Using Fedora 0 30th July 2004 04:48 PM


Current GMT-time: 16:17 (Friday, 24-05-2013)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.
Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

 FedoraForum is Powered by RedHat