FedoraForum.org - Fedora Support Forums and Community
Results 1 to 10 of 10
  1. #1
    djmax Guest

    Logitech MX510 - Jerky

    I have the aforementioned mouse attached via USB on FC4, and I notice the cursor sticking frequently, much as you'd have in the bygone days of dirty rollerballs.

    In fact, I've had this jerkiness in every linux distro I've tried thus far (CentOS 4.3, SuSe 10), but it works flawlessly in XP so I can exclude it being the sensor itself at fault.

    Any suggestions, folks? Oh, btw I'm a new fish to Linux, so don't expect me to know how to recompile my kernel, et cetera.

  2. #2
    Effie04 Guest
    Hello and welcoe

    Maybe try this, i havnt tested it cause i have no problems with my mouse.

    anyways i have been told that if you edit this it helps solve a jerky/jumpy mouse problem:
    edit your vi /etc/X11/xorg.conf (dont forget to back it up)
    find the section "InputDevice"
    there is a line there:
    Option "Protocol" "IMPS/2"
    edit and change the IMPS/2 to PS/2 :
    Option "Protocol" "PS/2"
    save the file, reset the xserver and.. hope it helped?

  3. #3
    Join Date
    Jul 2005
    Posts
    67
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    This is what I ose for my MX518 in /etc/X11/xorg.conf

    Code:
    Section "InputDevice"
    	Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "ExplorerPS/2"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Buttons" "10"
    	Option	    "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
    	Option	    "ZAxisMapping" "4 5"
    	Option	    "Emulate3Buttons" "no"
    EndSection
    It even activates the Forward and Back buttons in my browser.

    I couldn't find any info on the MX510 on Logitech's website.

  4. #4
    Effie04 Guest
    well, try changingt the line:
    Option "Protocol" "ExplorerPS/2"
    thats the driver that runs your mouse

  5. #5
    atery Guest

    Angry

    Quote Originally Posted by BanditRider
    This is what I ose for my MX518 in /etc/X11/xorg.conf

    Code:
    Section "InputDevice"
    	Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "ExplorerPS/2"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Buttons" "10"
    	Option	    "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
    	Option	    "ZAxisMapping" "4 5"
    	Option	    "Emulate3Buttons" "no"
    EndSection
    It even activates the Forward and Back buttons in my browser.

    I couldn't find any info on the MX510 on Logitech's website.
    I am so confused about the Button number and the Mapping, can you tip me something about them? My logitech cordless trackman officially has 8 button, but I heard from somewhere that "sometimes" the middle button may become 3 button... Now I set the "Button" "8", however, the backwards and forwards button totally disfunction (one acts like right button, the other won't work at all), the cruise up and down button work somehow, and the wheel is good. But again the drag button works as left button, which is the most uncomfortable thing, because I set this button as double click in windows, and so used to it.

  6. #6
    Join Date
    Jul 2005
    Posts
    67
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by kmb
    Hi,
    I also have the MX1000 Laser, here are my settings in xorg.conf which seem to be working OK;

    Code:
    Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "ExplorerPS/2"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Buttons" "12"
    	Option	    "ZAxisMapping" "4 5"
    	Option	    "ButtonMapping" "1 2 3 6 7 8 9 10 11 12 4 5"
    	Option	    "Emulate3Buttons" "no"
    	Option	    "Resolution" "800"
    	Option	    "Name" "Logitech MX1000 Laser"
    Hope this helps,
    Kevin
    kmb posted this in another thread for his MX1000
    You can experiment with the numbers. Just remember to re-start Xwindows after each change.
    There might be an eaiser way (init 5 or something) but I just log out and log back in.

  7. #7
    atery Guest
    Quote Originally Posted by BanditRider
    kmb posted this in another thread for his MX1000
    You can experiment with the numbers. Just remember to re-start Xwindows after each change.
    There might be an eaiser way (init 5 or something) but I just log out and log back in.
    Thanks, I'll try this out. I always "restart" the whole linux for re-start .

  8. #8
    atery Guest
    2 BanditRider

    That works GREAT in my FC5! A big step, many thanks~

    Now I have my Forward and Backward buttons functioning in Opera. All other buttons are just fine, except two little problem. See if you have any idea :
    1. The cruise down and up keys: the default setting is once press for on line, while I always set in windows with its MouseWare software as once press for three line.
    2. The ¨Drag¨ button still don´t work. I mean now when I press it, it is just the same as left button.

    I think these two problem have something to do with the mouse button event settings, which I don´t know where to set? any suggestion? thanks

  9. #9
    Join Date
    Jul 2005
    Posts
    67
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have no idea what "cruise" or "drag" buttons are for. what do they do for you in Windows?

    Sounds like cruise is like the scroll wheel and drag, I just don't get.

  10. #10
    atery Guest
    Quote Originally Posted by BanditRider
    I have no idea what "cruise" or "drag" buttons are for. what do they do for you in Windows?
    Sounds like cruise is like the scroll wheel and drag, I just don't get.
    Cruise button are two buttons function just like ¨wheel up¨ and ¨wheel down¨ for turning the page up and down. Once get used to them, I seldom scroll my wheel. Especially when I want to scroll may lines, using the wheel seems inconvinient, instead I can just press those two buttons and release.

    The Drag button is just for drag windows, I don´t like this function, so I set it as ¨double click¨.

    Anyway, never mind what are those buttons used for in windows, I mean is there a way I can change the actions of them. Say just set Button 6 as double click, or button 7 as a key stroke, say ¨Ctrl+W¨.

Similar Threads

  1. Replies: 13
    Last Post: 14th October 2007, 08:50 PM
  2. Logitech MX510 Mouse.
    By joeborg in forum Hardware
    Replies: 4
    Last Post: 25th June 2007, 08:56 PM
  3. Extra USB mouse MX510
    By gotmonkey in forum Hardware
    Replies: 3
    Last Post: 28th July 2006, 04:45 PM
  4. jerky jerky fade to grey??
    By 3006828 in forum Wibble
    Replies: 0
    Last Post: 20th March 2006, 12:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •